TOOLS

Pinion Gear Locker Tool — pinion gear, Black

-€16.21

JIMS Pinion Gear Locker Tool — pinion gear, Black

Locks the gear while torquing the nut; aligns under the gear and screws into the case. Made in the U.S.A.

€63.02 €79.23

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

Sprocket Lock Tool — Crankshaft, camshaft, Black

-€23.73

JIMS Sprocket Lock Tool — Crankshaft, camshaft, Black

Locks camshafts and crankshaft sprockets for safe removal, replacement and torquing. Includes instructions. Made in the U.S.A.

€92.27 €116.00

-€84.43

JIMS Inner Cam Bearing Removal Tool — Kit, Black

Purpose-built tool for removing inner cam bearings without damaging the crankcase; includes instructions and retention design to prevent rollers from falling into the engine.

€328.33 €412.76

-€9.82

JIMS Replacement Wheel Bearing Expander Rod — Black

Replacement expander rod for sealed wheel bearing remover/installer kits. Made in the USA.

€38.18 €48.00

-€99.44

JIMS Case Splitter Tool — Crankcase, Black

Separates sealed engine case halves using a hand thread-in pushing screw; bolts to primary mounting holes. Made in the U.S.A.

€386.69 €486.13

-€27.02

JIMS Valve Spring Compressor — Valve Spring, Gray

Removes and replaces valves and new-style conical valve springs. Requires the dedicated valve spring compressor tool. Made in the U.S.A.

€105.09 €132.11

-€8.39

JIMS Primary Cover Inspection Plug Tool — Black

Tool for removing and installing the primary inspection plug. Made in the USA.

€32.64 €41.03

-€16.21

JIMS Pinion Gear Locker Tool — Pinion gear, Black

Locks the pinion gear for torquing the pinion nut. Easy to align and install.

€63.02 €79.23

Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer Tool — Black

-€110.03

JIMS Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer...

Holds the main drive gear square to its bearing bore and installs it without removing the transmission. Made in the USA.

€427.86 €537.89

Engine Stand — For Evo Big Twin, Blue, Powder-coated

-€28.02

S&S CYCLE Engine Stand — For Evo Big Twin, Blue, Powder-coated

Professional display appearance; protects against corrosion and minor abrasions. Economical solution for bench work, shipping, or display. Made in the U.S.A.

€109.19 €137.21

Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing Installer Tool — Black

-€71.05

JIMS Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing...

Safely installs main transmission case bearings in Harley Davidson Cruise Drive 6-Speed units without removing the bearing; holds bearing square to bore; made in the USA.

€276.32 €347.37

-€29.35

S&S CYCLE Engine Stand — For Twin Cam A Motor, Blue

Professional-looking support that protects finishes and provides an economical way to hold an engine for workbench use, shipping, or display. Made in the U.S.A.

€114.36 €143.71

-€16.38

JIMS Primary Locking Bar — Front engine sprocket, Black

Immobilizes the primary drive for safe maintenance; use with a torque wrench or breaker bar. Made in the U.S.A.

€63.72 €80.10

-€23.86

S&S CYCLE Engine Stand — For Twin Cam B Motor, Blue

Professional display-quality engine stand that protects against corrosion and minor abrasions. An economical solution for bench work, shipping, or display. Made in the U.S.A.

€92.77 €116.63

-€8.25

JIMS Shifter Fork Shaft Removal Tool — Black, Chrome

Loosens and removes both shifter shafts from the transmission door for easy disassembly. Made in the USA.

€32.09 €40.34

Harley Davidson Cruise Drive Trap Door Bearing Remover and Installer — 6-speed, Black

-€89.22

JIMS Harley Davidson Cruise Drive Trap Door Bearing Remover and...

Installs and removes lubed ball bearings into transmission trap doors; no arbor press required. Made in the U.S.A.

€346.97 €436.19

Replacement Puller Plate — Black, Chrome

-€21.50

JIMS Replacement Puller Plate — Black, Chrome

Spare extraction plate for mainshaft bearing race tools. Made in the USA.

€83.63 €105.13

-€43.41

JIMS Driver Handle — 6-Speed, Blue anodized

Tool for installing the main drive gear oil seal with a protective sleeve; made in the U.S.A.

€168.77 €212.18

25 mm Wheel Bearing Adapter — 25 mm, 2007–2019 Harley-Davidson fit, Black

-€21.10

JIMS 25 mm Wheel Bearing Adapter — 25 mm, 2007–2019 Harley-Davidson...

Made in the USA. For use with 25 mm wheel bearings on 2007–2019 Harley-Davidson® models. Precision-machined adapter for safe bearing removal.

€82.06 €103.16

-€57.13

S&S CYCLE Transmission Drilling Fixture — Black

Locates holes for drilling and tapping of the transmission case during T-Series engine installation with oil line adapter kit 310-0435.

€222.17 €279.30

-€42.16

JIMS 49mm Fork Seal and Dust Shield Installer — Blue

Installs lower leg 49 mm fork seals squarely without damaging the seal lip. Two-piece design for easier assembly and dust shield cover installation. Made in the U.S.A.

€163.95 €206.11

Late Model Wheel Bearing Puller/Hub Protector Support Plate — Black

-€31.10

JIMS Late Model Wheel Bearing Puller/Hub Protector Support Plate —...

Plate attaches to brake rotor mounting holes to provide a stable surface for bearing removal and installation; fits open-hub wheels with 5 or 7 lugs. Made in USA.

€120.93 €152.03

-€22.28

JIMS XL Sprocket Nut Socket Tool — Black

Short socket designed to remove, install and properly tighten the front final drive sprocket/pulley on Harley-Davidson® Sportster models; provides full contact to the nut.

€86.61 €108.89

-€11.49

JIMS Primary Locking Bar — Primary (Drive), Black

Immobilizes the primary drive for safe maintenance; allows torque-wrench tightening or breaker-bar loosening. Made in the U.S.A.

€44.67 €56.16

Compensator Bolt Torx® Socket — Compensator Bolt Driver, JIMS 5534, Chrome

-€4.45

JIMS Compensator Bolt Torx® Socket — Compensator Bolt Driver, JIMS...

Correct-style Torx driver/socket for the compensating sprocket retaining fastener. Made in the USA.

€17.32 €21.77

Cylinder Torque Plate Kit — 3.75"–3.875" bore, black

-€158.86

JIMS Cylinder Torque Plate Kit — 3.75"–3.875" bore, black

Use these plates when boring or honing late-model aluminum cylinders to simulate running stress conditions. Includes instructions. Made in the U.S.A.

€617.77 €776.63

-€21.59

JIMS Pushrod Cover Clip — Pushrod, Black

Quick one-hand tool for installing and removing cover clips. Won't mar or slip. Made in the U.S.A.

€83.97 €105.56

Piston Ring Compressor Set — 47.6 mm–73 mm (1-7/8"–2-7/8"), Set of 4, Black

-€34.82

JIMS Piston Ring Compressor Set — 47.6 mm–73 mm (1-7/8"–2-7/8"),...

Precise ratcheting compressor that compresses piston rings in small increments without damaging them. Made in the U.S.A.

€135.41 €170.23

-€44.20

JIMS Dual Gauge Leakdown Tester — JIMS, Cylinder, 4-Stroke, Black

Dual-gauge design for quick leakdown diagnosis; detects valve-seat leaks, bad rings and head gasket failures.

€171.90 €216.10

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS