TOOLS

Regina Professional Chain Riveting Tool — 420, 428, rivet

-€97.19

REGINA Regina Professional Chain Riveting Tool — 420, 428, rivet

Professional-grade chain fastening tool for precise, long-lasting joins; made in Italy and built for workshop use.

€342.82 €440.01

Pinion Gear Locker Tool — pinion gear, Black

-€13.98

JIMS Pinion Gear Locker Tool — pinion gear, Black

Locks the gear while torquing the nut; aligns under the gear and screws into the case. Made in the U.S.A.

€65.25 €79.23

Regina Professional Chain Riveting Tool — 520, 525, 530, Rivet

-€171.80

REGINA Regina Professional Chain Riveting Tool — 520, 525, 530, Rivet

Professional hand tool for riveting sealed Regina chains. Delivers shop-quality rivets; available in 1/2" and 5/8" sizes. Made in Italy.

€244.53 €416.33

Scorpion Clutch Hub Puller — Orange, Anodized

-€16.17

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€75.47 €91.64

Tri-fold Adjustable Ramp — 76 in length, 52 in width

-€44.95

MOOSE OFFROAD FOUR WHEEL Tri-fold Adjustable Ramp — 76 in length, 52 in width

Adjustable tri-fold ramp, fits 42–52 in, 1,250-lb. distributed capacity, bar-style traction surface; includes E‑Z grip rubber truckrests and nylon straps. Do not ride ATV on ramp.

€205.00 €249.95

$Arched Aluminum Folding Ramp — 229 cm (90\") length, 270 kg (595 lb) load capacity$

-€21.95

MOOSE OFFROAD HARD-PARTS Arched Aluminum Folding Ramp — 229 cm (90\") length, 270 kg...

Durable, lightweight aluminum arched folding ramp with E-Z grip rubber rests and nylon safety straps. Weighs only 13 lb. Maximum load 600 lb. Do not ride motorcycle on ramp.

€79.00 €100.95

-€71.95

MOOSE OFFROAD HARD-PARTS 6 Foot Ramp — 6 ft, 300 lb capacity, 4-pack

Aircraft-aluminum straight ramp with dimpled traction holes, rubber-coated tongue and stop-pin. Sold to dealers in 4-packs. Do not ride a motorcycle on the ramp.

€207.00 €278.95

$Aluminum Straight Folding Ramp — 213 cm (84\") , 180 kg (396 lb)$

-€24.95

MOOSE OFFROAD HARD-PARTS Aluminum Straight Folding Ramp — 213 cm (84\") , 180 kg (396 lb)

Folding straight aluminum ramp with rubber-coated fingers; folds flat for storage. Max load: 400 lb. Do not ride motorcycle on ramp.

€55.00 €79.95

-€151.95

MOOSE OFFROAD FOUR WHEEL UTV Loading Ramp — 241 cm (95"), 45.5 cm (18"), Aluminum

Heavy-duty loading ramps with EZ-grip rubber rests and nylon straps. Do not ride UTV or ATV on the ramp.

€398.00 €549.95

Sprocket Lock Tool — Crankshaft, camshaft, Black

-€20.47

JIMS Sprocket Lock Tool — Crankshaft, camshaft, Black

Locks camshafts and crankshaft sprockets for safe removal, replacement and torquing. Includes instructions. Made in the U.S.A.

€95.53 €116.00

-€72.84

JIMS Inner Cam Bearing Removal Tool — Kit, Black

Purpose-built tool for removing inner cam bearings without damaging the crankcase; includes instructions and retention design to prevent rollers from falling into the engine.

€339.92 €412.76

-€8.47

JIMS Replacement Wheel Bearing Expander Rod — Black

Replacement expander rod for sealed wheel bearing remover/installer kits. Made in the USA.

€39.53 €48.00

-€85.79

JIMS Case Splitter Tool — Crankcase, Black

Separates sealed engine case halves using a hand thread-in pushing screw; bolts to primary mounting holes. Made in the U.S.A.

€400.34 €486.13

-€23.31

JIMS Valve Spring Compressor — Valve Spring, Gray

Removes and replaces valves and new-style conical valve springs. Requires the dedicated valve spring compressor tool. Made in the U.S.A.

€108.80 €132.11

-€13.98

JIMS Pinion Gear Locker Tool — Pinion gear, Black

Locks the pinion gear for torquing the pinion nut. Easy to align and install.

€65.25 €79.23

Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer Tool — Black

-€94.93

JIMS Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer...

Holds the main drive gear square to its bearing bore and installs it without removing the transmission. Made in the USA.

€442.96 €537.89

Heavy Duty Straight-Folding Ramp — 80" x 11" (203 x 28 cm), 362 kg (800 lb), Powder Coated

-€20.95

MOOSE OFFROAD HARD-PARTS Heavy Duty Straight-Folding Ramp — 80" x 11" (203 x 28 cm),...

Center-folding mesh ramp with welded carrying handle, rubber-coated fingers, and included tie down straps. Warning: do not ride motorcycles or ATVs on the ramp.

€78.00 €98.95

Recovery/Traction Boards — 104 cm (41"), 30 cm (11.75"), 10,000 lb capacity, red

-€21.95

MOOSE OFFROAD HARD-PARTS Recovery/Traction Boards — 104 cm (41"), 30 cm (11.75"),...

Reinforced nylon recovery boards that flex under load and assist in freeing vehicles from mud, snow, and sand. Mounting hardware included.

€50.00 €71.95

Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing Installer Tool — Black

-€61.30

JIMS Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing...

Safely installs main transmission case bearings in Harley Davidson Cruise Drive 6-Speed units without removing the bearing; holds bearing square to bore; made in the USA.

€286.07 €347.37

$Recovery/Traction Boards — 104 cm (41\"), 30 cm (11-3/4\"), 10,000 lb capacity$

-€21.95

MOOSE OFFROAD HARD-PARTS Recovery/Traction Boards — 104 cm (41\"), 30 cm (11-3/4\"),...

Durable reinforced nylon recovery boards offering flexibility and support for recoveries in mud, snow, and sand; mounting hardware included.

€50.00 €71.95

-€14.14

JIMS Primary Locking Bar — Front engine sprocket, Black

Immobilizes the primary drive for safe maintenance; use with a torque wrench or breaker bar. Made in the U.S.A.

€65.96 €80.10

-€49.70

JIMS Transmission Sprocket Locknut Wrench — Black

Extra-long two-piece wrench designed to remove the hex nut at the end of the main drive gear. Inner collar retains wrench to nut for safer work.

€231.93 €281.63

-€7.12

JIMS Shifter Fork Shaft Removal Tool — Black, Chrome

Loosens and removes both shifter shafts from the transmission door for easy disassembly. Made in the USA.

€33.22 €40.34

Harley Davidson Cruise Drive Trap Door Bearing Remover and Installer — 6-speed, Black

-€76.98

JIMS Harley Davidson Cruise Drive Trap Door Bearing Remover and...

Installs and removes lubed ball bearings into transmission trap doors; no arbor press required. Made in the U.S.A.

€359.21 €436.19

Replacement Puller Plate — Black, Chrome

-€18.55

JIMS Replacement Puller Plate — Black, Chrome

Spare extraction plate for mainshaft bearing race tools. Made in the USA.

€86.58 €105.13

-€49.37

JIMS Driver Handle — 6-Speed, Blue anodized

Tool for installing the main drive gear oil seal with a protective sleeve; made in the U.S.A.

€160.35 €209.72

25 mm Wheel Bearing Adapter — 25 mm, 2007–2019 Harley-Davidson fit, Black

-€18.21

JIMS 25 mm Wheel Bearing Adapter — 25 mm, 2007–2019 Harley-Davidson...

Made in the USA. For use with 25 mm wheel bearings on 2007–2019 Harley-Davidson® models. Precision-machined adapter for safe bearing removal.

€84.95 €103.16

-€36.37

JIMS 49mm Fork Seal and Dust Shield Installer — Blue

Installs lower leg 49 mm fork seals squarely without damaging the seal lip. Two-piece design for easier assembly and dust shield cover installation. Made in the U.S.A.

€169.74 €206.11

-€34.95

MOOSE OFFROAD HARD-PARTS Metric Flywheel Puller Set — 10-piece, M14–M28 thread sizes

Metric 10-piece puller set includes common M14–M28 thread pitches and a storage case for organized transport.

€77.00 €111.95

Inner Primary Bearing and Seal Removal and Installation Tool — Black, Chrome

-€59.92

JIMS Inner Primary Bearing and Seal Removal and Installation Tool —...

Precision tool for removal and installation of inner primary bearings and seals; eliminates the need for a press and reduces risk of part damage.

€279.61 €339.53

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS