TOOLS

-€2.37

DRAG SPECIALTIES Oil Filter Wrench — 14-flute, Black

Compact oil filter wrench with cutout profile for crank sensor clearance; fits most common filters.

€6.72 €9.09

Scorpion Clutch Hub Puller — Orange, Anodized

-€36.97

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€54.67 €91.64

-€19.74

DRAG SPECIALTIES 1-1/2" Ratchet Tie-Downs — 72" length, 6,000 lb tensile, Black

Durable 1-1/2" ratchet tie-downs with vinyl-coated safety hooks, double security stitching, and dependable nylon webbing.

€55.77 €75.51

Soft-Tie 18" Extensions — 18", 6000 lb capacity, 1-1/2" width

-€4.47

DRAG SPECIALTIES Soft-Tie 18" Extensions — 18", 6000 lb capacity, 1-1/2" width

Soft-Tie extensions protect paint and chrome while securing bars and other thick anchor points; made in the United States.

€12.61 €17.08

-€2.43

DRAG SPECIALTIES Oil Filter Wrench — Black, Steel, Metric

Fits 74 mm ID, 15-flute stepped S&S oil filters; 3/8" square drive; also fits filter part #0712-0648.

€6.89 €9.32

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

Flexi-Rigid Manifold Adapter — M5, Black

-€3.06

TECMATE Flexi-Rigid Manifold Adapter — M5, Black

Flexible guide adapter for synchronizing machines with hard-to-reach carburetor or fuel-injection vacuum ports; bend the sheath and turn the inner tube to thread the fitting.

€11.86 €14.92

-€35.09

TECMATE CarbMate — 2-Channel, 12V, Black

Electronic two‑channel synchronizer for carburetors and throttle bodies with a transverse 9‑LED display; accurate to 0.5 cmHg; zero‑adjust knob; powered by 12V battery.

€136.49 €171.58

Fuel Transfer System for Delphi Fuel Injection — Black, Fits '01–'25 Harley-Davidson (except V‑Rod)

-€38.60

FUEL-TOOL Fuel Transfer System for Delphi Fuel Injection — Black, Fits...

Transfers up to one quart every 20 seconds; tool-free connection. Includes storage pouch. Fits '01–'25 Harley-Davidson models (except V‑Rod). Made in the USA.

€109.08 €147.68

-€53.44

FUEL-TOOL Fuel Pressure Check Gauge — Delphi fuel injection, Black

Compact gauge for quick, accurate fuel pressure checks on '01-'25 Harley Davidson Delphi fuel-injected models.

€151.05 €204.49

-€32.10

DRAG SPECIALTIES Oil Extractor — 4 L (1.05 US gal.), Black, Clear

Sturdy and portable oil extractor for easy fluid removal.

€90.73 €122.83

-€154.42

TECMATE Synchronizer — Yellow

Fast, accurate tool for synchronizing up to four throttle valves; built-in tachometer and rechargeable 7.2 V NiMH battery.

€600.50 €754.92

Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

-€6.00

FUEL-TOOL Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

Replacement hooks for check valve rebuild kit; includes two lower O-ring hooks and two upper O-ring hooks; made in the USA.

€16.98 €22.98

Hi-Pressure Shock Pump — 23 cm, rear shock, 0–30 psi, black/silver

-€11.72

DRAG SPECIALTIES Hi-Pressure Shock Pump — 23 cm, rear shock, 0–30 psi,...

Twist-and-lock removable gauge for compact storage. Fits rear shocks and front forks. Rotary flexible hose, die-cast gauge base and ergonomic handle. Precise adjust button for fine control.

€33.10 €44.82

Hi-Pressure Shock Pump — Rear shock, 0–60 psi, 23 cm (9")

-€12.06

DRAG SPECIALTIES Hi-Pressure Shock Pump — Rear shock, 0–60 psi, 23 cm (9")

Twist-and-lock removable gauge, rotary flexible hose, die-cast gauge base and ergonomic handle. Precise adjust button (2–3 psi per push). Fits in small storage areas.

€34.09 €46.15

-€1.97

DRAG SPECIALTIES Clear Timing Hole Plug — 19 mm (3/4"), timing mark, clear

Locates the timing mark without getting an eye full of oil.

€5.57 €7.54

-€46.76

DRAG SPECIALTIES Center Jack — 453 kg (1000 lb), 37 cm (14-1/2"), Black/Gray

Sturdy manual scissor jack with a non-slip rubber top pad and large footprint for stable motorcycle lifting. Not for use with air or electric impact guns.

€132.15 €178.91

-€44.19

DRAG SPECIALTIES Center Jack — 1,000 lb (453 kg), 14-1/2" max height

Sturdy scissor center jack with a durable rubber top pad and wide base for stable motorcycle lifting. Do not use air or electric impact guns.

€124.89 €169.08

-€11.31

SCAR Fork Cap Wrench — 49 mm drive, Black

Tool for disassembling Kayaba, Showa and WP forks. Secure engagement for service and maintenance.

€31.94 €43.25

-€8.25

SCAR Fork Cap Wrench — 50 mm fork tube, Black

Precision tool for safely removing fork caps on Kayaba, Showa and WP forks.

€23.33 €31.58

-€8.25

SCAR Fork Cap Wrench — 50 mm drive (1-31/32"), 50 mm fork tube

Removes and installs fork caps for compatible suspension forks. Suitable for workshop maintenance and service. Sold each.

€23.33 €31.58

-€23.40

SCAR Adjustable Lift Stand — 200 kg, 35 cm, Black

Hydraulic adjustable lift stand with height range 33–43 cm, safety hold hook, max 150 kg, black powder coat.

€66.23 €89.63

Digital Fork Air Pump — Fork, Black, fits 7/8" and 1-1/8" handlebars

-€19.58

SCAR Digital Fork Air Pump — Fork, Black, fits 7/8" and 1-1/8"...

High-pressure pump for air forks with a large LCD, anti air-loss valve, auto on/off, and a pivoting hose for 7/8" and 1-1/8" handlebars.

€55.34 €74.92

-€1.73

DRAG SPECIALTIES Cargo Net — 12" x 17", black, vinyl-coated metal hooks

Elastic cargo net secures gear on seats and luggage racks for easy transport and compact storage.

€4.89 €6.62

Fork Cap Wrench — WP, fork compression valve, anodized brass

-€6.73

SCAR Fork Cap Wrench — WP, fork compression valve, anodized brass

Specialty wrench for removing and installing fork caps; compatible with many Kayaba and Showa forks.

€19.02 €25.75

Replacement Parts For Rk Chain Breaker/Press Fit Tool — Clip, Rivet, Black

-€4.36

RK Replacement Parts For Rk Chain Breaker/Press Fit Tool — Clip,...

Replacement tail piece (cut) for chain breaker/press-fit tools. Precision-cut for consistent alignment and reliable link assembly.

€5.68 €10.04

Replacement Parts For Rk Chain Breaker/Press Fit Tool — Tail Piece Press, Black, for clip/rivet

-€4.36

RK Replacement Parts For Rk Chain Breaker/Press Fit Tool — Tail...

Replacement component for chain breaker and press-fit tools; improves alignment and press operations.

€5.68 €10.04

-€4.54

RK Small Pressure Bolt — for clip and rivet, black

Replacement pressure component for chain breaker and press-fit tools that supplies controlled, consistent pressure for master link work.

€13.86 €18.40

-€2.47

RK Replacement Parts for RK Chain Breaker/Press Fit Tool — Clip,...

Replacement cut pin holder for chain breaker and press-fit tools; secures and guides pins for easy removal and installation.

€7.57 €10.04

Replacement Parts For Rk Chain Breaker/Press Fit Tool — for master link connectors clip and rivet, Steel

-€2.47

RK Replacement Parts For Rk Chain Breaker/Press Fit Tool — for...

Replacement parts for chain breaker and press-fit tools. Precision components to maintain alignment and extend tool life.

€7.57 €10.04

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS