TOOLS

Pinion Gear Locker Tool — pinion gear, Black

-€16.21

JIMS Pinion Gear Locker Tool — pinion gear, Black

Locks the gear while torquing the nut; aligns under the gear and screws into the case. Made in the U.S.A.

€63.02 €79.23

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

Sprocket Lock Tool — Crankshaft, camshaft, Black

-€23.73

JIMS Sprocket Lock Tool — Crankshaft, camshaft, Black

Locks camshafts and crankshaft sprockets for safe removal, replacement and torquing. Includes instructions. Made in the U.S.A.

€92.27 €116.00

-€84.43

JIMS Inner Cam Bearing Removal Tool — Kit, Black

Purpose-built tool for removing inner cam bearings without damaging the crankcase; includes instructions and retention design to prevent rollers from falling into the engine.

€328.33 €412.76

-€9.82

JIMS Replacement Wheel Bearing Expander Rod — Black

Replacement expander rod for sealed wheel bearing remover/installer kits. Made in the USA.

€38.18 €48.00

-€99.44

JIMS Case Splitter Tool — Crankcase, Black

Separates sealed engine case halves using a hand thread-in pushing screw; bolts to primary mounting holes. Made in the U.S.A.

€386.69 €486.13

-€27.02

JIMS Valve Spring Compressor — Valve Spring, Gray

Removes and replaces valves and new-style conical valve springs. Requires the dedicated valve spring compressor tool. Made in the U.S.A.

€105.09 €132.11

-€8.39

JIMS Primary Cover Inspection Plug Tool — Black

Tool for removing and installing the primary inspection plug. Made in the USA.

€32.64 €41.03

-€16.21

JIMS Pinion Gear Locker Tool — Pinion gear, Black

Locks the pinion gear for torquing the pinion nut. Easy to align and install.

€63.02 €79.23

Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer Tool — Black

-€110.03

JIMS Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer...

Holds the main drive gear square to its bearing bore and installs it without removing the transmission. Made in the USA.

€427.86 €537.89

Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing Installer Tool — Black

-€71.05

JIMS Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing...

Safely installs main transmission case bearings in Harley Davidson Cruise Drive 6-Speed units without removing the bearing; holds bearing square to bore; made in the USA.

€276.32 €347.37

-€16.38

JIMS Primary Locking Bar — Front engine sprocket, Black

Immobilizes the primary drive for safe maintenance; use with a torque wrench or breaker bar. Made in the U.S.A.

€63.72 €80.10

-€8.25

JIMS Shifter Fork Shaft Removal Tool — Black, Chrome

Loosens and removes both shifter shafts from the transmission door for easy disassembly. Made in the USA.

€32.09 €40.34

Harley Davidson Cruise Drive Trap Door Bearing Remover and Installer — 6-speed, Black

-€89.22

JIMS Harley Davidson Cruise Drive Trap Door Bearing Remover and...

Installs and removes lubed ball bearings into transmission trap doors; no arbor press required. Made in the U.S.A.

€346.97 €436.19

-€7.31

UFO Fork Block System — Black, Front

Secures the fork during transport, keeping the vehicle stable and minimizing suspension damage.

€11.61 €18.92

Replacement Puller Plate — Black, Chrome

-€21.50

JIMS Replacement Puller Plate — Black, Chrome

Spare extraction plate for mainshaft bearing race tools. Made in the USA.

€83.63 €105.13

-€43.41

JIMS Driver Handle — 6-Speed, Blue anodized

Tool for installing the main drive gear oil seal with a protective sleeve; made in the U.S.A.

€168.77 €212.18

-€1.38

STAHLWILLE Wrench — 16 mm, 17 mm, 140 mm, Chrome

Metric double open-end wrench, sizes 16 mm & 17 mm, length 140 mm; spanner openings 8 x 9 mm; weight 21 g.

€3.39 €4.77

25 mm Wheel Bearing Adapter — 25 mm, 2007–2019 Harley-Davidson fit, Black

-€21.10

JIMS 25 mm Wheel Bearing Adapter — 25 mm, 2007–2019 Harley-Davidson...

Made in the USA. For use with 25 mm wheel bearings on 2007–2019 Harley-Davidson® models. Precision-machined adapter for safe bearing removal.

€82.06 €103.16

-€2.19

STAHLWILLE Wrench — 18×21 mm, 140 mm, Chrome

Open-end metric wrench meeting DIN 3110 and ISO 10102; 8×9 mm opening, 140 mm length, b1 18 mm / b2 21 mm, 21 g.

€5.35 €7.54

-€42.16

JIMS 49mm Fork Seal and Dust Shield Installer — Blue

Installs lower leg 49 mm fork seals squarely without damaging the seal lip. Two-piece design for easier assembly and dust shield cover installation. Made in the U.S.A.

€163.95 €206.11

-€1.54

STAHLWILLE Wrench — 9 mm, 165 mm, Chrome

Combination wrench, DIN 3113 form A, anti-slip drive; spanner opening 14 mm, length 165 mm.

€3.80 €5.34

-€0.98

STAHLWILLE Wrench — 3/8", chrome

DIN 3113/ISO 7738 combination wrench — 14 mm opening, 165 mm length, chrome plated.

€5.67 €6.65

Late Model Wheel Bearing Puller/Hub Protector Support Plate — Black

-€31.10

JIMS Late Model Wheel Bearing Puller/Hub Protector Support Plate —...

Plate attaches to brake rotor mounting holes to provide a stable surface for bearing removal and installation; fits open-hub wheels with 5 or 7 lugs. Made in USA.

€120.93 €152.03

-€2.31

STAHLWILLE Wrench — 14 mm, 15 mm, Chrome

Offset spanner, DIN 838/ISO 10104; chrome alloy steel, chrome plated. Openings 8 x 10 mm, L 180 mm, weight 61 g.

€5.63 €7.94

-€2.55

STAHLWILLE Wrench — 17 mm, 16 mm, chrome

Offset metric wrench with chrome alloy construction and precise measurements for confined spaces. Length 180 mm.

€6.22 €8.77

-€22.28

JIMS XL Sprocket Nut Socket Tool — Black

Short socket designed to remove, install and properly tighten the front final drive sprocket/pulley on Harley-Davidson® Sportster models; provides full contact to the nut.

€86.61 €108.89

-€4.06

STAHLWILLE Wrench — 18 mm, 21 mm, Chrome

Offset wrench with StahlwilleSTABIL® offset, chrome plated, 8 x 10 mm openings, 180 mm length.

€9.89 €13.95

-€2.55

STAHLWILLE Wrench — Chrome, Metric

Combination wrench, metric 8 x 10 mm openings, 180 mm length, chrome plated.

€6.22 €8.77

-€2.72

STAHLWILLE Wrench — 8 x 10 mm, 180 mm, Chrome

Combination wrench, 8 x 10 mm opening, 180 mm length, chrome finish.

€6.63 €9.35

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS