TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

-€73.76

K&L SUPPLY Center Stand — 498 kg (1100 lb), 33.02 cm (13"), Gold, Zinc

Scissor jack for raising bikes and ATVs. Minimum height 3-1/2" (88.9 mm). Do not use air or impact guns.

€286.83 €360.59

Carburetor Cleaner Kit — Spiral wire, Black

-€5.65

K&L SUPPLY Carburetor Cleaner Kit — Spiral wire, Black

Fourteen-piece wire set with spiral knurling for cleaning common jets and carb body holes. Includes compact case for storage and transport.

€15.94 €21.59

3-in-1 Truing Stand — 11" between centers, rims up to 21", Silver

-€243.93

K&L SUPPLY 3-in-1 Truing Stand — 11" between centers, rims up to 21", Silver

Versatile 3-in-1 stand for truing, balancing and checking crank runout; fits cranks up to 11" between centers and rims to 21".

€948.60 €1,192.53

-€11.41

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€44.40 €55.81

-€46.14

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€179.42 €225.56

-€7.24

WERA Wrench — 18 mm, stainless steel

High-quality ratcheting combination wrench with holding function, limit stop and 30° return angle for tight spaces.

€17.71 €24.95

-€7.40

WERA Wrench — 11/16" SAE, stainless steel

High-performance hand tool with holding jaw, limit stop, double-hex geometry and a 30° return angle for tight spaces.

€18.09 €25.49

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€26.33

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 €128.73

-€87.42

K&L SUPPLY Kwik-Loader Valve Keeper Tool Set — Valve assembly, Black/White

Two-tool set that speeds keeper removal and installation using a removal tool and a hand-operated installation tool for fast, reliable valve service.

€247.03 €334.45

-€3.89

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.14 €19.03

-€10.35

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€40.24 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€46.00

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€178.90 €224.90

-€26.33

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€102.40 €128.73

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€38.80

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€150.91 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€18.25

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€70.99 €89.24

-€63.71

K&L SUPPLY Dial Indicator Gauge — Black, SAE, Magnet

Precision dial indicator reads 1.0" in .001" increments; lockable zero; includes magnetic base with adjustable arm.

€180.06 €243.77

-€37.99

K&L SUPPLY Carburetor Service Stand — Black

Positions carburetors for easy access; holds openings 22 mm–41 mm; bench-mountable.

€107.38 €145.37

Deluxe Vacuum Gauge Set — 2" gauges, 0–76 cm/Hg

-€71.68

K&L SUPPLY Deluxe Vacuum Gauge Set — 2" gauges, 0–76 cm/Hg

Includes storage case, rubber hoses, 5 mm and 6 mm adapters; built-in restrictions prevent needle bounce; 2" gauges, 0–76 cm/Hg readings.

€278.76 €350.44

-€8.34

K&L SUPPLY Carburetor Sync Adapters — 170 mm, M5 x 0.8, Set of 2, Silver

Handy adapters that connect your synchronizer to carburetor vacuum ports for accurate tuning and improved idle.

€23.58 €31.92

-€11.28

K&L SUPPLY Carburetor Sync Adapters — M6 x 1.0 thread, 60 mm

Useful tool for syncing your carburetor to achieve accurate vacuum balancing and smoother running.

€31.89 €43.17

-€9.29

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€36.18 €45.47

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

-€60.51

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€235.80 €296.31

-€10.33

K&L SUPPLY MC450 Rubber Pad — Center Jack, black

Rubber non-skid pad with self-adhesive backing mounts on top of the MC450 center jack for added grip and protection.

€29.19 €39.52

MC455 Fat Jack Center Jack — 498 kg (1100 lb), 16 in × 10 in, Gold

-€175.47

K&L SUPPLY MC455 Fat Jack Center Jack — 498 kg (1100 lb), 16 in × 10 in,...

Included self-adhesive rubber nonskid pad; wide nonskid deck for increased lifting stability; lifts front or rear of bikes on MC600-type lifts; compatible with MC464 Fat Jack dolly; do not use air/impact guns.

€495.91 €671.38

-€11.31

SCAR Fork Cap Wrench — 49 mm drive, Black

Tool for disassembling Kayaba, Showa and WP forks. Secure engagement for service and maintenance.

€31.94 €43.25

-€8.25

SCAR Fork Cap Wrench — 50 mm fork tube, Black

Precision tool for safely removing fork caps on Kayaba, Showa and WP forks.

€23.33 €31.58

-€8.25

SCAR Fork Cap Wrench — 50 mm drive (1-31/32"), 50 mm fork tube

Removes and installs fork caps for compatible suspension forks. Suitable for workshop maintenance and service. Sold each.

€23.33 €31.58

-€23.40

SCAR Adjustable Lift Stand — 200 kg, 35 cm, Black

Hydraulic adjustable lift stand with height range 33–43 cm, safety hold hook, max 150 kg, black powder coat.

€66.23 €89.63

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS