TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

-€11.41

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€44.40 €55.81

-€46.14

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€179.42 €225.56

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€26.33

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 €128.73

-€3.89

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.14 €19.03

-€10.35

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€40.24 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€46.00

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€178.90 €224.90

-€26.33

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€102.40 €128.73

F15 Multi-Tool — 164 g, 8–12-speed chain tool, Black

-€6.20

CRANKBROTHERS F15 Multi-Tool — 164 g, 8–12-speed chain tool, Black

Thin, lightweight 15-tool multitool with magnetic case that doubles as a handle and built-in bottle opener. 164 g.

€35.81 €42.01

-€4.97

CRANKBROTHERS M20 Multi-Tool — 89 mm, 203 g, Black

Compact 20-function multi-tool with integrated tire plug tool, mountable storage case, chain-tool and common hex/Torx drivers.

€28.64 €33.61

-€4.59

CRANKBROTHERS M19 Multi-Tool — 2–10 mm, T10, T25, Nickel

Compact high-tensile steel multi-tool with chain tool, hex and Torx wrenches; 175 g, 89 mm length.

€26.49 €31.08

-€4.59

CRANKBROTHERS M19 Multi-Tool — 175 g, 89 mm, Black

Compact bicycle multi-tool with chain tool, hex wrenches (2–8 mm), open wrenches (8 & 10 mm), screwdrivers, spoke wrench and Torx bits. Weighs 175 g; 89 mm long.

€26.49 €31.08

-€3.72

CRANKBROTHERS M17 Multi-Tool — Gold, 2–10 mm, T25

Compact multi-tool with chain tool for 8–12 speed, hex wrenches 2–8 mm, 8/10 mm open wrenches, Phillips/flat screwdrivers, spoke wrench and T25.

€21.48 €25.20

-€3.72

CRANKBROTHERS M17 Multi-Tool — Black, 8 mm, 10 mm, T25

Compact high-tensile steel multi-tool with chain tool for 8–12-speed, hex wrenches 2–8 mm, open wrenches 8/10 mm, Phillips and flat screwdrivers; 168 g, 89 mm.

€21.48 €25.20

Speedier Tire Lever — 144 mm, 26 g, Black

-€0.73

CRANKBROTHERS Speedier Tire Lever — 144 mm, 26 g, Black

Single lever removes and installs tires while protecting knuckles. Weighs 26 g; 144 mm long.

€4.30 €5.03

Cigar Tool Plug Kit and CO2 Head — 78 mm L x 30 mm W, Presta only, Black, Silver

-€5.15

CRANKBROTHERS Cigar Tool Plug Kit and CO2 Head — 78 mm L x 30 mm W, Presta...

Compact tubeless repair kit with CO2 adapter, aluminum storage case, bottle cage bracket, five plugs included. Measures 78 mm × 30 mm; 55 g. CO2 cartridge sold separately.

€20.05 €25.20

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€38.80

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€150.91 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€18.25

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€70.99 €89.24

Flexi-Rigid Manifold Adapter — M5, Black

-€3.06

TECMATE Flexi-Rigid Manifold Adapter — M5, Black

Flexible guide adapter for synchronizing machines with hard-to-reach carburetor or fuel-injection vacuum ports; bend the sheath and turn the inner tube to thread the fitting.

€11.86 €14.92

-€35.09

TECMATE CarbMate — 2-Channel, 12V, Black

Electronic two‑channel synchronizer for carburetors and throttle bodies with a transverse 9‑LED display; accurate to 0.5 cmHg; zero‑adjust knob; powered by 12V battery.

€136.49 €171.58

Fuel Transfer System for Delphi Fuel Injection — Black, Fits '01–'25 Harley-Davidson (except V‑Rod)

-€38.60

FUEL-TOOL Fuel Transfer System for Delphi Fuel Injection — Black, Fits...

Transfers up to one quart every 20 seconds; tool-free connection. Includes storage pouch. Fits '01–'25 Harley-Davidson models (except V‑Rod). Made in the USA.

€109.08 €147.68

-€53.44

FUEL-TOOL Fuel Pressure Check Gauge — Delphi fuel injection, Black

Compact gauge for quick, accurate fuel pressure checks on '01-'25 Harley Davidson Delphi fuel-injected models.

€151.05 €204.49

-€154.42

TECMATE Synchronizer — Yellow

Fast, accurate tool for synchronizing up to four throttle valves; built-in tachometer and rechargeable 7.2 V NiMH battery.

€600.50 €754.92

-€9.29

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€36.18 €45.47

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

-€60.51

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€235.80 €296.31

Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

-€6.00

FUEL-TOOL Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

Replacement hooks for check valve rebuild kit; includes two lower O-ring hooks and two upper O-ring hooks; made in the USA.

€16.98 €22.98

-€49.32

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€191.83 €241.15

-€1.85

TECHNORESEARCH O2 Instal Block — TR200055

Compact sampling block for wideband O2 sensors with vent screw for pressure equalization.

€7.19 €9.04

Piston Cooling Jet Pressure Tester Block Kit - Stand Alone Tool — Black, Red kit, fits Twin Cam and M8

-€43.78

FEULING PARTS Piston Cooling Jet Pressure Tester Block Kit - Stand Alone...

Complete set with tool plate, gauge, regulator and hardware. Tests all Twin Cam and M8 piston cooling jets. Stand-alone version for shops lacking the companion reference part.

€123.77 €167.55

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS