TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

-€73.76

K&L SUPPLY Center Stand — 498 kg (1100 lb), 33.02 cm (13"), Gold, Zinc

Scissor jack for raising bikes and ATVs. Minimum height 3-1/2" (88.9 mm). Do not use air or impact guns.

€286.83 €360.59

Carburetor Cleaner Kit — Spiral wire, Black

-€5.65

K&L SUPPLY Carburetor Cleaner Kit — Spiral wire, Black

Fourteen-piece wire set with spiral knurling for cleaning common jets and carb body holes. Includes compact case for storage and transport.

€15.94 €21.59

3-in-1 Truing Stand — 11" between centers, rims up to 21", Silver

-€243.93

K&L SUPPLY 3-in-1 Truing Stand — 11" between centers, rims up to 21", Silver

Versatile 3-in-1 stand for truing, balancing and checking crank runout; fits cranks up to 11" between centers and rims to 21".

€948.60 €1,192.53

-€11.41

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€44.40 €55.81

-€46.14

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€179.42 €225.56

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€26.33

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 €128.73

-€87.42

K&L SUPPLY Kwik-Loader Valve Keeper Tool Set — Valve assembly, Black/White

Two-tool set that speeds keeper removal and installation using a removal tool and a hand-operated installation tool for fast, reliable valve service.

€247.03 €334.45

-€3.89

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.14 €19.03

-€10.35

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€40.24 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€46.00

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€178.90 €224.90

-€26.33

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€102.40 €128.73

F15 Multi-Tool — 164 g, 8–12-speed chain tool, Black

-€6.20

CRANKBROTHERS F15 Multi-Tool — 164 g, 8–12-speed chain tool, Black

Thin, lightweight 15-tool multitool with magnetic case that doubles as a handle and built-in bottle opener. 164 g.

€35.81 €42.01

-€4.97

CRANKBROTHERS M20 Multi-Tool — 89 mm, 203 g

Compact 20-function multi-tool with integrated tire plug storage, chain-tool for 8–12-speed drivetrains, and a full set of hex, Torx, spoke and screwdriver bits.

€28.64 €33.61

-€4.59

CRANKBROTHERS M19 Multi-Tool — Nickel, 2–10 mm, T10, T25

Compact, high-tensile steel multi-tool with side grips; weighs 175 g and measures 89 mm. Includes chain tool (8/9/10/11/12-speed), hex wrenches, open wrenches, screwdrivers, spoke wrench and T10/T25 Torx®.

€26.49 €31.08

-€4.59

CRANKBROTHERS M19 Multi-Tool — 175 g, 89 mm, Black

Compact bicycle multi-tool with chain tool, hex wrenches (2–8 mm), open wrenches (8 & 10 mm), screwdrivers, spoke wrench and Torx bits. Weighs 175 g; 89 mm long.

€26.49 €31.08

-€3.72

CRANKBROTHERS M17 Multi-Tool — 168 g, 89 mm, Gold

High-tensile steel multi-tool with side grips; includes chain tool, hex set, open wrenches, screwdrivers, spoke wrench, and T25 Torx.

€21.48 €25.20

-€3.72

CRANKBROTHERS M17 Multi-Tool — 2–10 mm hex, T25, Black

Compact multi-tool, 168 g and 89 mm long, with chain tool compatible with 8–12 speed and a full set of hex, Torx, screwdriver, and spoke wrenches.

€21.48 €25.20

Speedier Tire Lever — 144 mm, 26 g, Black

-€0.73

CRANKBROTHERS Speedier Tire Lever — 144 mm, 26 g, Black

Single lever removes and installs tires while protecting knuckles. Weighs 26 g; 144 mm long.

€4.30 €5.03

Cigar Tool Plug Kit and CO2 Head — 78 mm L x 30 mm W, Presta only, Black, Silver

-€5.15

CRANKBROTHERS Cigar Tool Plug Kit and CO2 Head — 78 mm L x 30 mm W, Presta...

Compact tubeless repair kit with CO2 adapter, aluminum storage case, bottle cage bracket, five plugs included. Measures 78 mm × 30 mm; 55 g. CO2 cartridge sold separately.

€20.05 €25.20

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€38.80

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€150.91 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€18.25

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€70.99 €89.24

-€63.71

K&L SUPPLY Dial Indicator Gauge — Black, SAE, Magnet

Precision dial indicator reads 1.0" in .001" increments; lockable zero; includes magnetic base with adjustable arm.

€180.06 €243.77

-€37.99

K&L SUPPLY Carburetor Service Stand — Black

Positions carburetors for easy access; holds openings 22 mm–41 mm; bench-mountable.

€107.38 €145.37

Deluxe Vacuum Gauge Set — 2" gauges, 0–76 cm/Hg

-€71.68

K&L SUPPLY Deluxe Vacuum Gauge Set — 2" gauges, 0–76 cm/Hg

Includes storage case, rubber hoses, 5 mm and 6 mm adapters; built-in restrictions prevent needle bounce; 2" gauges, 0–76 cm/Hg readings.

€278.76 €350.44

Fuel Transfer System for Delphi Fuel Injection — Black, Fits '01–'25 Harley-Davidson (except V‑Rod)

-€38.60

FUEL-TOOL Fuel Transfer System for Delphi Fuel Injection — Black, Fits...

Transfers up to one quart every 20 seconds; tool-free connection. Includes storage pouch. Fits '01–'25 Harley-Davidson models (except V‑Rod). Made in the USA.

€109.08 €147.68

-€8.34

K&L SUPPLY Carburetor Sync Adapters — 170 mm, M5 x 0.8, Set of 2, Silver

Handy adapters that connect your synchronizer to carburetor vacuum ports for accurate tuning and improved idle.

€23.58 €31.92

-€53.44

FUEL-TOOL Fuel Pressure Check Gauge — Delphi fuel injection, Black

Compact gauge for quick, accurate fuel pressure checks on '01-'25 Harley Davidson Delphi fuel-injected models.

€151.05 €204.49

-€11.28

K&L SUPPLY Carburetor Sync Adapters — M6 x 1.0 thread, 60 mm

Useful tool for syncing your carburetor to achieve accurate vacuum balancing and smoother running.

€31.89 €43.17

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS