TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€36.97

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€54.67 €91.64

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

Fuel Transfer System for Delphi Fuel Injection — Black, Fits '01–'25 Harley-Davidson (except V‑Rod)

-€38.60

FUEL-TOOL Fuel Transfer System for Delphi Fuel Injection — Black, Fits...

Transfers up to one quart every 20 seconds; tool-free connection. Includes storage pouch. Fits '01–'25 Harley-Davidson models (except V‑Rod). Made in the USA.

€109.08 €147.68

-€53.44

FUEL-TOOL Fuel Pressure Check Gauge — Delphi fuel injection, Black

Compact gauge for quick, accurate fuel pressure checks on '01-'25 Harley Davidson Delphi fuel-injected models.

€151.05 €204.49

Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

-€6.00

FUEL-TOOL Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

Replacement hooks for check valve rebuild kit; includes two lower O-ring hooks and two upper O-ring hooks; made in the USA.

€16.98 €22.98

-€4.22

LIQUI MOLY Drain Valve — Red, White

Fits LIQUI MOLY® 20 L canisters with ventilation and DIN 61 thread. Enables draining without ventilation to minimize spills.

€11.91 €16.13

-€1.85

SOLAS Impeller Installation Tool — YV, YS impeller series

Quick, safe tool for installing impellers. Match the tool application to your impeller series for proper fit.

€5.91 €7.76

-€8.28

SOLAS Impeller Installation Tool — Fits SX/SRZ/Twin (TP) and Fly series

Makes installing an impeller a snap. To find the proper installation tool for your impeller, match the tool application to the impeller series.

€26.42 €34.70

-€49.32

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€191.83 €241.15

-€1.85

TECHNORESEARCH O2 Instal Block — TR200055

Compact sampling block for wideband O2 sensors with vent screw for pressure equalization.

€7.19 €9.04

-€0.85

EMGO Bungee Nets — 38 cm (15"), S-hook, Black

Versatile, stretchable nets with six coated, non-abrasive hooks for secure tie-downs.

€2.40 €3.25

$Bungee Nets — 38 cm (15\") square, Red, S-hook ends$

-€0.87

EMGO Bungee Nets — 38 cm (15\") square, Red, S-hook ends

Stretchy bungee net secures cargo with six coated, non-abrasive hooks.

€2.44 €3.31

-€0.87

EMGO Bungee Nets — 15" square, Blue

Versatile bungee cargo net with six coated hooks that stretches to secure varied loads.

€2.44 €3.31

Impeller Installation Tool — Fits HA, KA, KD, KE, KF, KG, KH, KP, SD, SF, SK, ST, YH, YJ impellers

-€2.06

SOLAS Impeller Installation Tool — Fits HA, KA, KD, KE, KF, KG, KH,...

Makes impeller installation quick and simple; match tool application to impeller series to find the proper tool.

€6.57 €8.63

Impeller Installation Tool — fits YB, YD (YD series Super Camber Impellers I, J, K, X)

-€1.26

SOLAS Impeller Installation Tool — fits YB, YD (YD series Super...

Tool that simplifies impeller installation; match tool application to impeller series for correct fitment.

€4.02 €5.28

Impeller Installation Tool — fits PA, PB, PF, PL, TA, TB impellers

-€1.89

SOLAS Impeller Installation Tool — fits PA, PB, PF, PL, TA, TB...

Makes installing an impeller quick and easy.

Match the tool application to your impeller series to ensure proper fit.

€6.05 €7.94

Impeller Installation Tool — Fits YF, YG, YD Concord, YQ impellers

-€1.89

SOLAS Impeller Installation Tool — Fits YF, YG, YD Concord, YQ...

Quick tool for reliable impeller installation; reduces damage risk. Match the tool application to your impeller series.

€6.05 €7.94

-€1.89

SOLAS Drive Shaft Holding Tool — for YF, YX, YG impellers

Holds an impeller driveshaft securely during maintenance to prevent rotation and reduce risk of damage.

€6.05 €7.94

-€383.31

TECHNORESEARCH Centurion Super Pro Plus — Electrical system, Black

Professional-grade tester with intuitive controls, rugged housing, and modular expandability for fast, repeatable fault isolation.

€1,490.65 €1,873.96

-€172.34

TECHNORESEARCH Complete Oxygen Sensor Installation Kit — O2 sensor, Black, Clear

Fast, all‑in‑one bung kit for O2 sampling and tuning; includes insertion tool, drill bit, sampler blocks, tubing, 25 rivnuts, screws and copper washers.

€669.24 €841.58

-€14.96

TECHNORESEARCH Bung Refill Kit — O2 sensor, Silver/Yellow

Includes 25 each of bungs, plugs and copper washers.

€58.07 €73.03

-€7.24

EMGO Tire Lever Set — Gold, Pair

Two-piece set with built-in wrench sizes for emergency tire repairs; compact for adventure touring and trail use.

€10.45 €17.69

-€37.17

BARNETT Clutch Spring Compression Tool — Black

Compresses diaphragm clutch springs for easy removal and reinstallation of retainer rings. Made in the USA.

€65.06 €102.23

-€11.50

BARNETT Clutch Spring Compression Tool — Black

Tool for removal and reinstallation of retainer rings on diaphragm clutches. Durable and compact for shop or home use. Made in the USA.

€44.69 €56.19

Impeller Installation Tool — Fits SRB, SRX, SRZ, SX/SX-4 impellers

-€4.13
Out of Stock

SOLAS Impeller Installation Tool — Fits SRB, SRX, SRZ, SX/SX-4...

Simplifies impeller installation. Match the tool application to the impeller series to ensure proper fit.

€13.18 €17.31

Fuel Pressure Gauge — Fits '01-'25 Harley-Davidson (except V-Rod) with Delphi fuel injection, Black

-€67.58
Out of Stock

FUEL-TOOL Fuel Pressure Gauge — Fits '01-'25 Harley-Davidson (except...

Magnetic fuel pressure gauge to check static and load readings. Includes storage pouch and O-ring lube. Head rotates 360°. Fits '01-'25 Harley-Davidson models (except V-Rod) with Delphi fuel injection.

€190.99 €258.57

-€7.71
Out of Stock

EMGO 7" Wire Pliers — 17.78 cm (7"), Black

Precision pliers for consistent wire twisting. Return-spring mechanism reduces hand fatigue for repeated use.

€21.80 €29.51

-€1.38
Out of Stock

SOLAS Impeller Installation Tool — SOLAS, WR003, for YA Impellers

Makes impeller installation quick and accurate; match tool application to the impeller series.

€4.39 €5.77

-€1.37
Out of Stock

SOLAS Drive Shaft Holding Tool — For YB, YD, YRS, YQ impellers

Secures the impeller driveshaft during maintenance for safe removal and installation.

€4.39 €5.76

-€2.27
Out of Stock

SOLAS Impeller Installation Tool — KC Impellers

Fast, accurate tool for impeller installations. Match the tool application to the impeller series to select the correct tool.

€7.20 €9.47

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS