TOOLS

-€2.37

DRAG SPECIALTIES Oil Filter Wrench — 14-flute, Black

Compact oil filter wrench with cutout profile for crank sensor clearance; fits most common filters.

€6.72 €9.09

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

-€73.76

K&L SUPPLY Center Stand — 498 kg (1100 lb), 33.02 cm (13"), Gold, Zinc

Scissor jack for raising bikes and ATVs. Minimum height 3-1/2" (88.9 mm). Do not use air or impact guns.

€286.83 €360.59

Carburetor Cleaner Kit — Spiral wire, Black

-€5.65

K&L SUPPLY Carburetor Cleaner Kit — Spiral wire, Black

Fourteen-piece wire set with spiral knurling for cleaning common jets and carb body holes. Includes compact case for storage and transport.

€15.94 €21.59

3-in-1 Truing Stand — 11" between centers, rims up to 21", Silver

-€243.93

K&L SUPPLY 3-in-1 Truing Stand — 11" between centers, rims up to 21", Silver

Versatile 3-in-1 stand for truing, balancing and checking crank runout; fits cranks up to 11" between centers and rims to 21".

€948.60 €1,192.53

Variator Blocking Tool — Transmission, Black

-€2.34

NARAKU Variator Blocking Tool — Transmission, Black

Compact, easy-to-use variator blocking tool that secures the starter gear for quick maintenance and tuning.

€9.13 €11.47

-€19.74

DRAG SPECIALTIES 1-1/2" Ratchet Tie-Downs — 72" length, 6,000 lb tensile, Black

Durable 1-1/2" ratchet tie-downs with vinyl-coated safety hooks, double security stitching, and dependable nylon webbing.

€55.77 €75.51

-€87.42

K&L SUPPLY Kwik-Loader Valve Keeper Tool Set — Valve assembly, Black/White

Two-tool set that speeds keeper removal and installation using a removal tool and a hand-operated installation tool for fast, reliable valve service.

€247.03 €334.45

-€3.28

DRAG SPECIALTIES Soft-Tie 18" Extensions — 18", 2041 kg (4500 lb), Black

Gentle, scratch-safe tie-down extensions ideal for bars and tight attachment points. Made in the U.S.A.

€9.30 €12.58

Plush Soft-Tie Cover — 12", 1-1/2" width, fits 1" and 1.5" tie-downs, Black

-€4.94

DRAG SPECIALTIES Plush Soft-Tie Cover — 12", 1-1/2" width, fits 1" and 1.5"...

Slides over existing tie-down extensions to protect paint and chrome. Made in the U.S.A.

€13.97 €18.91

-€3.08

DRAG SPECIALTIES Clear Timing Hole Plug — 41.3 mm (1-5/8"), timing mark

Locates the timing mark without getting an eye full of oil.

€8.72 €11.80

-€2.43

DRAG SPECIALTIES Oil Filter Wrench — Black, Steel, Metric

Fits 74 mm ID, 15-flute stepped S&S oil filters; 3/8" square drive; also fits filter part #0712-0648.

€6.89 €9.32

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

Blind Hole Puller Set "Puller1" — 8-piece kit, 8–30 mm ID, stainless steel and plastic

-€43.34

BLACK BEARING Blind Hole Puller Set "Puller1" — 8-piece kit, 8–30 mm ID,...

Set of 8 pullers with a lead rod for removing bearings with 8–30 mm internal diameter; stainless steel and plastic construction.

€122.49 €165.83

-€83.89

BLACK BEARING Bearings Assembly Press "Press2" — Blue

Precision bearings assembly press with 34 CNC-machined anodized aluminum shims; includes case and shim kit; fits a wide range of bearing models.

€237.07 €320.96

Bearing Assembly & Disassembly Box — BLACK BEARING, Bearing, Kit

-€104.11

BLACK BEARING Bearing Assembly & Disassembly Box — BLACK BEARING, Bearing, Kit

Case for assembly and disassembly of frame pivot bearings. Not compatible with wheels or bottom brackets. Stainless steel and plastic construction.

€294.22 €398.33

Angle Measuring Tool — Stainless steel, Headset bearing

-€4.33

BLACK BEARING Angle Measuring Tool — Stainless steel, Headset bearing

Precision gauge for headset bearing angles with four measurement points: 36° and 45° inside and outside.

€12.25 €16.58

-€63.71

K&L SUPPLY Dial Indicator Gauge — Black, SAE, Magnet

Precision dial indicator reads 1.0" in .001" increments; lockable zero; includes magnetic base with adjustable arm.

€180.06 €243.77

-€3.16

NARAKU Piston Pin Tool — Black

Installs piston pin C-clips without damaging the piston using a conical guide and controlled pressing action.

€12.28 €15.44

-€37.99

K&L SUPPLY Carburetor Service Stand — Black

Positions carburetors for easy access; holds openings 22 mm–41 mm; bench-mountable.

€107.38 €145.37

-€2.87

NARAKU Piston Pin Tool — Black

Enables safe, damage-free installation of piston pin C-clips for precise, repeatable results.

€11.18 €14.05

Deluxe Vacuum Gauge Set — 2" gauges, 0–76 cm/Hg

-€71.68

K&L SUPPLY Deluxe Vacuum Gauge Set — 2" gauges, 0–76 cm/Hg

Includes storage case, rubber hoses, 5 mm and 6 mm adapters; built-in restrictions prevent needle bounce; 2" gauges, 0–76 cm/Hg readings.

€278.76 €350.44

-€8.34

K&L SUPPLY Carburetor Sync Adapters — 170 mm, M5 x 0.8, Set of 2, Silver

Handy adapters that connect your synchronizer to carburetor vacuum ports for accurate tuning and improved idle.

€23.58 €31.92

-€11.28

K&L SUPPLY Carburetor Sync Adapters — M6 x 1.0 thread, 60 mm

Useful tool for syncing your carburetor to achieve accurate vacuum balancing and smoother running.

€31.89 €43.17

-€32.10

DRAG SPECIALTIES Oil Extractor — 4 L (1.05 US gal.), Black, Clear

Sturdy and portable for quick fluid removal.

€90.73 €122.83

-€10.33

K&L SUPPLY MC450 Rubber Pad — Center Jack, black

Rubber non-skid pad with self-adhesive backing mounts on top of the MC450 center jack for added grip and protection.

€29.19 €39.52

MC455 Fat Jack Center Jack — 498 kg (1100 lb), 16 in × 10 in, Gold

-€175.47

K&L SUPPLY MC455 Fat Jack Center Jack — 498 kg (1100 lb), 16 in × 10 in,...

Included self-adhesive rubber nonskid pad; wide nonskid deck for increased lifting stability; lifts front or rear of bikes on MC600-type lifts; compatible with MC464 Fat Jack dolly; do not use air/impact guns.

€495.91 €671.38

Hi-Pressure Shock Pump — 23 cm, rear shock, 0–30 psi, black/silver

-€11.72

DRAG SPECIALTIES Hi-Pressure Shock Pump — 23 cm, rear shock, 0–30 psi,...

Twist-and-lock removable gauge for compact storage. Fits rear shocks and front forks. Rotary flexible hose, die-cast gauge base and ergonomic handle. Precise adjust button for fine control.

€33.10 €44.82

Hi-Pressure Shock Pump — Rear shock, 0–60 psi, 23 cm (9")

-€12.06

DRAG SPECIALTIES Hi-Pressure Shock Pump — Rear shock, 0–60 psi, 23 cm (9")

Twist-and-lock removable gauge, rotary flexible hose, die-cast gauge base and ergonomic handle. Precise adjust button (2–3 psi per push). Fits in small storage areas.

€34.09 €46.15

-€1.97

DRAG SPECIALTIES Clear Timing Hole Plug — 19 mm (3/4"), timing mark, clear

Locates the timing mark without getting an eye full of oil.

€5.57 €7.54

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS