TOOLS

-€25.68

KIBBLEWHITE Valve Guide Reamer — 181 mm (7.125"), Nickel

Precision reamer for valve guides designed for KPMI® manganese bronze and cast iron.

Do not use a reamer on bronze after it has been used on cast iron.

€72.64 €98.32

Scorpion Clutch Hub Puller — Orange, Anodized

-€36.97

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€54.67 €91.64

-€11.41

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€44.40 €55.81

-€46.14

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€179.42 €225.56

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€26.33

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 €128.73

-€3.89

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.14 €19.03

-€8.16

KIBBLEWHITE Valve Guide Ball Hone — 7.0 mm, Black, Silver

Ball hone for sizing valve guide materials; durable for C630 bronze and cast iron. Made in the U.S.A.

€23.10 €31.26

-€10.35

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€40.24 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€46.00

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€178.90 €224.90

-€26.33

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€102.40 €128.73

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€38.80

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€150.91 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€18.25

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€70.99 €89.24

Fuel Transfer System for Delphi Fuel Injection — Black, Fits '01–'25 Harley-Davidson (except V‑Rod)

-€38.60

FUEL-TOOL Fuel Transfer System for Delphi Fuel Injection — Black, Fits...

Transfers up to one quart every 20 seconds; tool-free connection. Includes storage pouch. Fits '01–'25 Harley-Davidson models (except V‑Rod). Made in the USA.

€109.08 €147.68

-€53.44

FUEL-TOOL Fuel Pressure Check Gauge — Delphi fuel injection, Black

Compact gauge for quick, accurate fuel pressure checks on '01-'25 Harley Davidson Delphi fuel-injected models.

€151.05 €204.49

-€9.29

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€36.18 €45.47

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

-€60.51

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€235.80 €296.31

Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

-€6.00

FUEL-TOOL Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

Replacement hooks for check valve rebuild kit; includes two lower O-ring hooks and two upper O-ring hooks; made in the USA.

€16.98 €22.98

Piston Cooling Jet Pressure Tester Block Kit - Stand Alone Tool — Black, Red kit, fits Twin Cam and M8

-€43.78

FEULING PARTS Piston Cooling Jet Pressure Tester Block Kit - Stand Alone...

Complete set with tool plate, gauge, regulator and hardware. Tests all Twin Cam and M8 piston cooling jets. Stand-alone version for shops lacking the companion reference part.

€123.77 €167.55

Exhaust Spring Puller Tool — T-handle, Black

-€5.79

FMF Exhaust Spring Puller Tool — T-handle, Black

T-handle spring puller that lets mechanics remove exhaust springs quickly and safely.

€9.22 €15.01

-€4.38

DAYTONA Magnetic Silicone Tray — DAYTONA, 31021

Foldable silicone tray with an embedded magnet in the base to secure it to metal surfaces.

€12.39 €16.77

-€4.38

DAYTONA Magnetic Silicone Tray — DAYTONA

Foldable silicone tray with an embedded magnet in the base for secure placement on metal surfaces. Compact and portable.

€12.39 €16.77

-€6.09

FEULING OIL PUMP CORP. Tire Pressure Gauge — 0 psi - 60 psi

Compact, easy-to-use tool that connects to standard Schrader valves for fast pressure checks.

€23.72 €29.81

-€37.17

BARNETT Clutch Spring Compression Tool — Black

Compresses diaphragm clutch springs for easy removal and reinstallation of retainer rings. Made in the USA.

€65.06 €102.23

-€11.50

BARNETT Clutch Spring Compression Tool — Black

Tool for removal and reinstallation of retainer rings on diaphragm clutches. Durable and compact for shop or home use. Made in the USA.

€44.69 €56.19

-€8.50
Out of Stock

KIBBLEWHITE Valve Guide Ball Hone — 4.0 mm

Durable ball hone designed to size C630 bronze and cast iron valve guides. Made in the U.S.A.

€33.06 €41.56

-€8.49
Out of Stock

KIBBLEWHITE Valve Guide Ball Hone — 4.5 mm

Durable hone for sizing C630 bronze and cast iron guide materials. Made in the U.S.A.

€33.00 €41.49

-€8.71
Out of Stock

KIBBLEWHITE Valve Guide Ball Hone — 5.5 mm, Black

Durable ball hone for sizing C630 bronze and cast iron valve guide materials. Made in the U.S.A.

€24.65 €33.36

Precision Reamer for Manganese Bronze Valve Guides — 7.9 mm (0.3110"), 181 mm (7.125"), Nickel

-€20.99
Out of Stock

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 7.9 mm...

Reamer engineered for KPMI manganese bronze and cast iron valve guides. Not for C630 nickel aluminum bronze. Cutting diameters +/- .0002".

€59.41 €80.40

$Precision Reamer for Manganese Bronze Valve Guides — 8.6 mm (0.3370\"), 181 mm (7.125\")$

-€31.85
Out of Stock

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 8.6 mm...

Precision reamer engineered for KPMI manganese bronze and cast iron valve guides. Not for C630 nickel aluminum bronze. Cutting diameters +/- .0002".

€90.09 €121.94

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS