TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€36.97

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€54.67 €91.64

-€29.35

S&S CYCLE Engine Stand — For Twin Cam A Motor, Blue

Professional-looking support that protects finishes and provides an economical way to hold an engine for workbench use, shipping, or display. Made in the U.S.A.

€114.36 €143.71

-€23.86

S&S CYCLE Engine Stand — For Twin Cam B Motor, Blue

Professional display-quality engine stand that protects against corrosion and minor abrasions. An economical solution for bench work, shipping, or display. Made in the U.S.A.

€92.77 €116.63

-€57.13

S&S CYCLE Transmission Drilling Fixture — Black

Locates holes for drilling and tapping of the transmission case during T-Series engine installation with oil line adapter kit 310-0435.

€222.17 €279.30

Legend Gear Saddle Strap SLS — 39 x 21 cm

-€8.60

SW-MOTECH Legend Gear Saddle Strap SLS — 39 x 21 cm

Secure strap for LS1/LS2 saddlebags; universal fit for straight bench seats; includes two double-clamping buckles.

€33.42 €42.02

-€1.72

SW-MOTECH Retention Strap Set for Tail Bags — 20 mm, 4 pack, Black

Replacement retention straps for tail bags. Includes four straps; easy to fit and adjust.

€6.68 €8.40

-€1.38

SW-MOTECH Tie-Down Strap Set for Tail Bags — 2 pack, black

Replacement tie-down straps for tail bags; includes 2 compression straps.

€5.34 €6.72

-€8.15

S&S CYCLE Tappet Block/Oil Pump Alignment Tool — Tappet, Oil system, Gray

Ensures tappet blocks track properly on the camshaft and aligns Twin Cam oil pump to the cam support plate; two tools required for Twin Cam engines.

€31.72 €39.87

-€1.72

SW-MOTECH Tension Straps — 4-pack, Black

Replacement tension straps for Drybag 180/250/260/350/450/600/620/700. Includes 4 retention straps.

€6.68 €8.40

-€3.43

SW-MOTECH Strap Set Legend — Black

Set of four loop straps (80 cm) and two mounting straps (100 cm) for Legend Gear bags; polyamide straps with anodized aluminum buckles; compatible with all Legend Gear bags.

€13.38 €16.81

-€3.43

SW-MOTECH Strap Set Legend — SW-MOTECH, Cargo, Black

Legend Gear strap set — 4 loop straps (80 cm), 2 mounting straps (100 cm); polyamide straps with anodized aluminum buckles; compatible with all Legend Gear bags.

€13.38 €16.81

Strap Set Legend — 4 loop straps (80 cm), 2 mounting straps (100 cm), Black

-€1.38

SW-MOTECH Strap Set Legend — 4 loop straps (80 cm), 2 mounting straps...

Four 80 cm loop straps and two 100 cm mounting straps for securing Legend Gear bags. Polyamide webbing with anodized aluminum buckles.

€5.34 €6.72

-€3.43

SW-MOTECH ROK Straps — 2-pack, black

Elastic ROK straps with metal buckle and quick-release fastener for secure luggage lashing.

€13.38 €16.81

-€4.29

SW-MOTECH ROK Straps — 2-pack, Black

Durable elastic straps with metal buckle and smooth-edged hardware for secure luggage lashing.

€16.72 €21.01

Legend Gear Shoulder Strap — 90–150 cm, Black

-€5.15

SW-MOTECH Legend Gear Shoulder Strap — 90–150 cm, Black

Padded LA4 shoulder strap converts accessory bags into a practical shoulder bag; adjustable 90–150 cm, with secure fastening straps and anodized aluminium hooks.

€20.06 €25.21

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

-€23.86

S&S CYCLE Engine Stand — For M8 models, Blue

Professional, economical engine support for bench work, shipping, and display.

€92.77 €116.63

CVO Cam Phaser Tool — Spool Valve, Silver

-€12.51

S&S CYCLE CVO Cam Phaser Tool — Spool Valve, Silver

Secures the cam phaser assembly so you can remove the spool valve bolt and access the cam chest.

€48.61 €61.12

-€49.32

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€191.83 €241.15

-€1.85

TECHNORESEARCH O2 Instal Block — TR200055

Compact sampling block for wideband O2 sensors with vent screw for pressure equalization.

€7.19 €9.04

-€10.29

S&S CYCLE Exhaust Dealer Service Kit — Exhaust, Silver

Complete service kit containing tamper-proof screws and a proprietary tamper-proof screw bit for end cap replacement and routine maintenance.

€40.02 €50.31

-€14.28

S&S CYCLE Crankcase Oil Passage Drilling Jig — Crankcase oil passage, gray

Precision drilling jig for preparing oil passages; used to install S&S® oil pumps on early motor cases. Made in the U.S.A.

€55.52 €69.80

-€1.72

SW-MOTECH Multi Tool Keychain — Silver, Brushed

Compact multi-function key accessory with bottle opener, quick-release fastener opener for EVO and PRO side carriers, and hex keys in 14, 8, 10, 12 and 13 mm. Laser-etched logo.

€6.68 €8.40

Exhaust Gasket Installation Tool — fits '84–'24 Harley-Davidson & S&S Cycle

-€6.12

S&S CYCLE Exhaust Gasket Installation Tool — fits '84–'24...

Installs exhaust gaskets evenly; integrates with a 3/8" drive socket extension and fits tapered and straight gaskets.

€23.86 €29.98

-€383.31

TECHNORESEARCH Centurion Super Pro Plus — Electrical system, Black

Professional-grade tester with intuitive controls, rugged housing, and modular expandability for fast, repeatable fault isolation.

€1,490.65 €1,873.96

-€172.34

TECHNORESEARCH Complete Oxygen Sensor Installation Kit — O2 sensor, Black, Clear

Fast, all‑in‑one bung kit for O2 sampling and tuning; includes insertion tool, drill bit, sampler blocks, tubing, 25 rivnuts, screws and copper washers.

€669.24 €841.58

-€14.96

TECHNORESEARCH Bung Refill Kit — O2 sensor, Silver/Yellow

Includes 25 each of bungs, plugs and copper washers.

€58.07 €73.03

-€163.88

DAYTONA TWIN TEC LLC Twin Scan 4 Diagnostic Kit — 3.2" L x 2.2" W x 1" H, CAN Bus

Professional motorcycle diagnostic kit with ECM programming, DTC read/clear, key fob reprogramming, stand-alone data logging, analog inputs and scopemeter capability.

€637.33 €801.21

-€5.45

S&S CYCLE Main Jet Tool — Silver, S&S CYCLE

Tool for changing main jets in super carburetors using #72 series jets. Made in the USA.

€21.19 €26.64

-€37.17

BARNETT Clutch Spring Compression Tool — Black

Compresses diaphragm clutch springs for easy removal and reinstallation of retainer rings. Made in the USA.

€65.06 €102.23

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS