TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

-€11.41

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€44.40 €55.81

-€46.14

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€179.42 €225.56

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€26.33

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 €128.73

-€3.89

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.14 €19.03

-€10.35

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€40.24 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€46.00

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€178.90 €224.90

-€26.33

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€102.40 €128.73

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€38.80

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€150.91 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€18.25

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€70.99 €89.24

Fuel Transfer System for Delphi Fuel Injection — Black, Fits '01–'25 Harley-Davidson (except V‑Rod)

-€38.60

FUEL-TOOL Fuel Transfer System for Delphi Fuel Injection — Black, Fits...

Transfers up to one quart every 20 seconds; tool-free connection. Includes storage pouch. Fits '01–'25 Harley-Davidson models (except V‑Rod). Made in the USA.

€109.08 €147.68

-€53.44

FUEL-TOOL Fuel Pressure Check Gauge — Delphi fuel injection, Black

Compact gauge for quick, accurate fuel pressure checks on '01-'25 Harley Davidson Delphi fuel-injected models.

€151.05 €204.49

-€9.29

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€36.18 €45.47

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

-€60.51

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€235.80 €296.31

Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

-€6.00

FUEL-TOOL Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

Replacement hooks for check valve rebuild kit; includes two lower O-ring hooks and two upper O-ring hooks; made in the USA.

€16.98 €22.98

Piston Cooling Jet Pressure Tester Block Kit - Stand Alone Tool — Black, Red kit, fits Twin Cam and M8

-€43.78

FEULING PARTS Piston Cooling Jet Pressure Tester Block Kit - Stand Alone...

Complete set with tool plate, gauge, regulator and hardware. Tests all Twin Cam and M8 piston cooling jets. Stand-alone version for shops lacking the companion reference part.

€123.77 €167.55

Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

-€41.73
New

FEULING PARTS Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

Complete kit with tool plate, gauge, regulator and hardware. Tests piston cooling jets to diagnose or prevent issues before engine build completion. Stand-alone option for users without a compatible part number.

€162.33 €204.06

Exhaust Spring Puller Tool — T-handle, Black

-€2.73

FMF Exhaust Spring Puller Tool — T-handle, Black

T-handle spring puller that lets mechanics remove exhaust springs quickly and safely.

€12.28 €15.01

-€163.88

DAYTONA TWIN TEC LLC Twin Scan 4 Diagnostic Kit — 3.2" L x 2.2" W x 1" H, CAN Bus

Professional motorcycle diagnostic kit with ECM programming, DTC read/clear, key fob reprogramming, stand-alone data logging, analog inputs and scopemeter capability.

€637.33 €801.21

Tread Doctor Tire Cutting Tool — Black, Stainless Steel

-€15.90

HARDLINE Tread Doctor Tire Cutting Tool — Black, Stainless Steel

Refreshes front or rear tires with a heated carbide blade; plug-in operation and easily resharpens for long life.

€44.92 €60.82

-€3.05

HARDLINE Thread Doctor™ Sniper Tool — HARDLINE, TD-SNIPER, Tire, Brass

Precision cutting tool for tread repair. Fits Tread Doctor™ heating irons. Cuts 1/4" grooves with adjustable depth.

€11.90 €14.95

-€21.68

HARDLINE Tread Doc — HARDLINE Tread, Kit

Heated carbide cutting tool for knobby tires. Angled cutting head for thin slices, forged carbide blade for lasting sharpness. Includes on/off switch and holding stand; works on any motorcycle tire.

€61.30 €82.98

-€1.83

HARDLINE Tread Doc — Tire

Heated carbide cutting tool for knobby tires; angled head for thin slices to extend tire life. Includes holding stand and on/off switch.

€7.12 €8.95

-€6.09

FEULING OIL PUMP CORP. Tire Pressure Gauge — 0 psi - 60 psi

Compact, easy-to-use tool that connects to standard Schrader valves for fast pressure checks.

€23.72 €29.81

-€20.91

BARNETT Clutch Spring Compression Tool — Black

Compresses diaphragm clutch springs for easy removal and reinstallation of retainer rings. Made in the USA.

€81.32 €102.23

-€11.50

BARNETT Clutch Spring Compression Tool — Black

Tool for removal and reinstallation of retainer rings on diaphragm clutches. Durable and compact for shop or home use. Made in the USA.

€44.69 €56.19

-€30.56
Out of Stock

FEULING OIL PUMP CORP. Reamer for Camplate/Oil Pump Tool — Gold, Oil Pump

Lightly machines camplate relief valve seats and re-seats the plunger valve; use with pressure-test tools for Twin Cam and Milwaukee Eight engines.

€118.85 €149.41

Universal Replacement Dial Indicator — 9016, Black, Silver, Yellow

-€11.30
Out of Stock

FEULING OIL PUMP CORP. Universal Replacement Dial Indicator — 9016, Black, Silver,...

Universal replacement dial indicator. Fits Feuling tool part# 9015.

€44.06 €55.36

-€31.65
Out of Stock

FEULING OIL PUMP CORP. Milwaukee Eight Engine Stand — Red, Feuling Parts

Fits softail and touring engine cases, mounts using factory front and two rear engine mount bolts, and includes three bench-mount holes.

€123.09 €154.74

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS