TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

-€3.19

SHOW CHROME Oil Filter Wrench — Thin, Silver

Removes the oil filter without removing fairing pieces; secure locking mechanism requires no adjustment; fits most 2-1/2" filters.

€13.30 €16.49

-€2.36

SHOW CHROME Tiedown Loop — 18" (45.5 cm), pair, red

18" looped nylon extension straps keep metal tie-down ends away from your bike. Sold in a two pack.

€3.00 €5.36

$Moto Stand — 30.5 cm (12\") length, Black$

-€20.45

CYCRA Moto Stand — 30.5 cm (12\") length, Black

Molded rubber top with countersunk area for rivets, large built-in tool tray, wide guide edges, composite plastic legs.

€57.78 €78.23

$Moto Stand — 12\" , Orange$

-€20.45

CYCRA Moto Stand — 12\" , Orange

Low-profile service stand with molded rubber top, built-in tool tray, wide guide edges and composite legs.

€57.78 €78.23

-€20.45

CYCRA Moto Stand — 12" (30.5 cm), Red

Stable maintenance platform with a molded rubber top, large built-in tool tray, wide guide edges and composite plastic legs.

€57.78 €78.23

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

-€3.57

SHOW CHROME Filter Wrench — 64 mm (2-1/2"), oil filter, silver

12-sided addition for fast access to 17 mm and 12 mm drain plugs.

Includes drain plug wrench. Made in USA.

€13.84 €17.41

Fuel Transfer System for Delphi Fuel Injection — Black, Fits '01–'25 Harley-Davidson (except V‑Rod)

-€38.60

FUEL-TOOL Fuel Transfer System for Delphi Fuel Injection — Black, Fits...

Transfers up to one quart every 20 seconds; tool-free connection. Includes storage pouch. Fits '01–'25 Harley-Davidson models (except V‑Rod). Made in the USA.

€109.08 €147.68

-€1.85

SOLAS Impeller Installation Tool — YV, YS impeller series

Quick, safe tool for installing impellers. Match the tool application to your impeller series for proper fit.

€5.91 €7.76

-€8.28

SOLAS Impeller Installation Tool — Fits SX/SRZ/Twin (TP) and Fly series

Makes installing an impeller a snap. To find the proper installation tool for your impeller, match the tool application to the impeller series.

€26.42 €34.70

-€42.55
New

DARKHORSE MOTOR COMPANY Universal TIR Tool Kit — Pinion shaft, Sprocket shaft, Black

Quick, accurate TIR measurement for pinion and sprocket shafts; includes magnets for spline checking; made in the USA.

€120.30 €162.85

-€41.29
New

DARKHORSE MOTOR COMPANY Engine Stand for Harley Davidson® M8 — Black powder-coated

Precision laser-cut support for Harley Davidson® M8 engines with wrinkle black powder-coat; made in the USA; adapter kit 3801-0444 available.

€116.70 €157.99

Adapter Kit for Harley Davidson® Engine Stand — Black, powder-coated steel

-€31.12
New

DARKHORSE MOTOR COMPANY Adapter Kit for Harley Davidson® Engine Stand — Black,...

Complete 50-year adapter kit for Harley Davidson® engine stands, covering 1970s Shovels through Late Model M8’s®; made in the USA.

€87.98 €119.10

Impeller Installation Tool — fits YB, YD (YD series Super Camber Impellers I, J, K, X)

-€1.26

SOLAS Impeller Installation Tool — fits YB, YD (YD series Super...

Tool that simplifies impeller installation; match tool application to impeller series for correct fitment.

€4.02 €5.28

Impeller Installation Tool — Fits YF, YG, YD Concord, YQ impellers

-€1.89

SOLAS Impeller Installation Tool — Fits YF, YG, YD Concord, YQ...

Quick tool for reliable impeller installation; reduces damage risk. Match the tool application to your impeller series.

€6.05 €7.94

-€1.89

SOLAS Drive Shaft Holding Tool — for YF, YX, YG impellers

Holds an impeller driveshaft securely during maintenance to prevent rotation and reduce risk of damage.

€6.05 €7.94

Handlebar Mount Tire Pressure Monitor System — fits 7/8", 1", 1-1/8" handlebars, gray

-€50.68

SHOW CHROME Handlebar Mount Tire Pressure Monitor System — fits 7/8", 1",...

Handlebar-mounted TPMS kit with universal valve-stem sensors, patented anti-theft rings, 20-minute battery-saver mode and G-force wake; mounts to round or face-mounted brake clamps.

€159.92 €210.60

-€20.91

BARNETT Clutch Spring Compression Tool — Black

Compresses diaphragm clutch springs for easy removal and reinstallation of retainer rings. Made in the USA.

€81.32 €102.23

-€11.50

BARNETT Clutch Spring Compression Tool — Black

Tool for removal and reinstallation of retainer rings on diaphragm clutches. Durable and compact for shop or home use. Made in the USA.

€44.69 €56.19

-€24.51
Out of Stock

CYCRA Moto Stand — 12" L, 12" W, Blue

Service stand with molded rubber top, built-in tool tray, wide guide edges and composite plastic legs.

€69.27 €93.78

$Moto Stand — 30.5 cm (12\"), Green$

-€24.51
Out of Stock

CYCRA Moto Stand — 30.5 cm (12\"), Green

Service stand with molded rubber top, large built-in tool tray, wide guide edges and composite plastic legs for stable, low‑maintenance support.

€69.27 €93.78

Impeller Installation Tool — Fits SRB, SRX, SRZ, SX/SX-4 impellers

-€4.13
Out of Stock

SOLAS Impeller Installation Tool — Fits SRB, SRX, SRZ, SX/SX-4...

Simplifies impeller installation. Match the tool application to the impeller series to ensure proper fit.

€13.18 €17.31

-€53.44
Out of Stock

FUEL-TOOL Fuel Pressure Check Gauge — Delphi fuel injection, Black

Compact gauge for quick, accurate fuel pressure checks on '01-'25 Harley Davidson Delphi fuel-injected models.

€151.05 €204.49

Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

-€6.00
Out of Stock

FUEL-TOOL Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

Replacement hooks for check valve rebuild kit; includes two lower O-ring hooks and two upper O-ring hooks; made in the USA.

€16.98 €22.98

Fuel Pressure Gauge — Fits '01-'25 Harley-Davidson (except V-Rod) with Delphi fuel injection, Black

-€67.58
Out of Stock

FUEL-TOOL Fuel Pressure Gauge — Fits '01-'25 Harley-Davidson (except...

Magnetic fuel pressure gauge to check static and load readings. Includes storage pouch and O-ring lube. Head rotates 360°. Fits '01-'25 Harley-Davidson models (except V-Rod) with Delphi fuel injection.

€190.99 €258.57

Impeller Installation Tool — Fits HA, KA, KD, KE, KF, KG, KH, KP, SD, SF, SK, ST, YH, YJ impellers

-€2.06
Out of Stock

SOLAS Impeller Installation Tool — Fits HA, KA, KD, KE, KF, KG, KH,...

Makes impeller installation quick and simple; match tool application to impeller series to find the proper tool.

€6.57 €8.63

-€1.38
Out of Stock

SOLAS Impeller Installation Tool — SOLAS, WR003, for YA Impellers

Makes impeller installation quick and accurate; match tool application to the impeller series.

€4.39 €5.77

-€1.37
Out of Stock

SOLAS Drive Shaft Holding Tool — For YB, YD, YRS, YQ impellers

Secures the impeller driveshaft during maintenance for safe removal and installation.

€4.39 €5.76

-€2.27
Out of Stock

SOLAS Impeller Installation Tool — KC Impellers

Fast, accurate tool for impeller installations. Match the tool application to the impeller series to select the correct tool.

€7.20 €9.47

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS