TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

-€73.76

K&L SUPPLY Center Stand — 498 kg (1100 lb), 33.02 cm (13"), Gold, Zinc

Scissor jack for raising bikes and ATVs. Minimum height 3-1/2" (88.9 mm). Do not use air or impact guns.

€286.83 €360.59

Carburetor Cleaner Kit — Spiral wire, Black

-€5.65

K&L SUPPLY Carburetor Cleaner Kit — Spiral wire, Black

Fourteen-piece wire set with spiral knurling for cleaning common jets and carb body holes. Includes compact case for storage and transport.

€15.94 €21.59

3-in-1 Truing Stand — 11" between centers, rims up to 21", Silver

-€243.93

K&L SUPPLY 3-in-1 Truing Stand — 11" between centers, rims up to 21", Silver

Versatile 3-in-1 stand for truing, balancing and checking crank runout; fits cranks up to 11" between centers and rims to 21".

€948.60 €1,192.53

Variator Blocking Tool — Transmission, Black

-€2.34

NARAKU Variator Blocking Tool — Transmission, Black

Compact, easy-to-use variator blocking tool that secures the starter gear for quick maintenance and tuning.

€9.13 €11.47

-€87.42

K&L SUPPLY Kwik-Loader Valve Keeper Tool Set — Valve assembly, Black/White

Two-tool set that speeds keeper removal and installation using a removal tool and a hand-operated installation tool for fast, reliable valve service.

€247.03 €334.45

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

-€63.71

K&L SUPPLY Dial Indicator Gauge — Black, SAE, Magnet

Precision dial indicator reads 1.0" in .001" increments; lockable zero; includes magnetic base with adjustable arm.

€180.06 €243.77

-€3.16

NARAKU Piston Pin Tool — Black

Installs piston pin C-clips without damaging the piston using a conical guide and controlled pressing action.

€12.28 €15.44

-€37.99

K&L SUPPLY Carburetor Service Stand — Black

Positions carburetors for easy access; holds openings 22 mm–41 mm; bench-mountable.

€107.38 €145.37

-€2.87

NARAKU Piston Pin Tool — Black

Enables safe, damage-free installation of piston pin C-clips for precise, repeatable results.

€11.18 €14.05

Deluxe Vacuum Gauge Set — 2" gauges, 0–76 cm/Hg

-€71.68

K&L SUPPLY Deluxe Vacuum Gauge Set — 2" gauges, 0–76 cm/Hg

Includes storage case, rubber hoses, 5 mm and 6 mm adapters; built-in restrictions prevent needle bounce; 2" gauges, 0–76 cm/Hg readings.

€278.76 €350.44

-€8.34

K&L SUPPLY Carburetor Sync Adapters — 170 mm, M5 x 0.8, Set of 2, Silver

Handy adapters that connect your synchronizer to carburetor vacuum ports for accurate tuning and improved idle.

€23.58 €31.92

-€11.28

K&L SUPPLY Carburetor Sync Adapters — M6 x 1.0 thread, 60 mm

Useful tool for syncing your carburetor to achieve accurate vacuum balancing and smoother running.

€31.89 €43.17

-€10.33

K&L SUPPLY MC450 Rubber Pad — Center Jack, black

Rubber non-skid pad with self-adhesive backing mounts on top of the MC450 center jack for added grip and protection.

€29.19 €39.52

MC455 Fat Jack Center Jack — 498 kg (1100 lb), 16 in × 10 in, Gold

-€175.47

K&L SUPPLY MC455 Fat Jack Center Jack — 498 kg (1100 lb), 16 in × 10 in,...

Included self-adhesive rubber nonskid pad; wide nonskid deck for increased lifting stability; lifts front or rear of bikes on MC600-type lifts; compatible with MC464 Fat Jack dolly; do not use air/impact guns.

€495.91 €671.38

MC464 Fat Jack Dolly — 800 lb (362 kg), Gold

-€48.94

K&L SUPPLY MC464 Fat Jack Dolly — 800 lb (362 kg), Gold

Makes a Fat Jack lift mobile for easy, stable shop repositioning. Casters provide smooth movement. Fat Jack sold separately.

€190.33 €239.27

-€49.32

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€191.83 €241.15

-€1.85

TECHNORESEARCH O2 Instal Block — TR200055

Compact sampling block for wideband O2 sensors with vent screw for pressure equalization.

€7.19 €9.04

-€5.67

CUSTOM DYNAMICS LED Road Flare Safety Light — Emergency, Clear, Red

Compact LED road flare with a 360° beacon, three emergency modes, built-in hook and rear magnet. Requires 3 AAA batteries (sold separately).

€22.01 €27.68

Polaris Roll Pin Punch Tool — fits '90–current Polaris ATVs/UTVs (7661913), Black

-€9.89

QUAD LOGIC Polaris Roll Pin Punch Tool — fits '90–current Polaris...

Removes Polaris driveline roll pins (7661913); use with air or standard hammer. Replace the roll pin each time.

€27.97 €37.86

-€383.31

TECHNORESEARCH Centurion Super Pro Plus — Black kit

Advanced electrical system diagnostic tool; not for use with Android-based systems. Optional red USB key (PN# 1020-2868) required for Direct Link.

€1,490.65 €1,873.96

-€172.34

TECHNORESEARCH Complete Oxygen Sensor Installation Kit — O2 sensor, Black, Clear

Fast, all‑in‑one bung kit for O2 sampling and tuning; includes insertion tool, drill bit, sampler blocks, tubing, 25 rivnuts, screws and copper washers.

€669.24 €841.58

-€14.96

TECHNORESEARCH Bung Refill Kit — Silver, Yellow, for 3807-0378

Includes 25 each of bungs, plugs and copper washers. For use with 3807-0378 only.

€58.07 €73.03

-€3.42

CUSTOM DYNAMICS Test Light — Black

Compact tester for 12–24 V DC circuits. Checks for shorts, open circuits and measures voltage for fast troubleshooting.

€10.91 €14.33

-€12.97

K&L SUPPLY Tire Tamer — Black, Yellow

One-handed tire bead lifter that makes tube, valve stem and rim lock installation quick and easy. Small and trail-ready; saves knuckles and time.

€36.66 €49.63

-€51.61

K&L SUPPLY 3-in-1 Tire Bead Starter — Black

Easy-to-use bead starter that helps seat stubborn tires quickly and safely.

€145.88 €197.49

-€9.65

K&L SUPPLY Tire Valve Stem Inserter — tubeless tires, silver

Simplifies valve stem installation for faster, more reliable seating and reduced downtime.

€27.30 €36.95

-€5.68

K&L SUPPLY Spoke Wheel Weight Hammer — Brass

Special hammer that reaches behind disc rotors for installing or removing spoke-type wheel weights.

€16.06 €21.74

-€20.91

BARNETT Clutch Spring Compression Tool — Black

Compresses diaphragm clutch springs for easy removal and reinstallation of retainer rings. Made in the USA.

€81.32 €102.23

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS