TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

-€73.76

K&L SUPPLY Center Stand — 498 kg (1100 lb), 33.02 cm (13"), Gold, Zinc

Scissor jack for raising bikes and ATVs. Minimum height 3-1/2" (88.9 mm). Do not use air or impact guns.

€286.83 €360.59

BT02 Battery & Alternator Tester — Black

-€7.63

BS BATTERY BT02 Battery & Alternator Tester — Black

Instant battery and alternator diagnosis for 12V lead-acid systems; simple, foolproof operation for quick checks.

€16.34 €23.97

BT01 Battery Condition Indicator — Black

-€4.76

BS BATTERY BT01 Battery Condition Indicator — Black

Quickly checks 12V lead-acid batteries with one-button operation, M6 eyelet terminals, and waterproof construction.

€10.19 €14.95

Carburetor Cleaner Kit — Spiral wire, Black

-€5.65

K&L SUPPLY Carburetor Cleaner Kit — Spiral wire, Black

Fourteen-piece wire set with spiral knurling for cleaning common jets and carb body holes. Includes compact case for storage and transport.

€15.94 €21.59

3-in-1 Truing Stand — 11" between centers, rims up to 21", Silver

-€243.93

K&L SUPPLY 3-in-1 Truing Stand — 11" between centers, rims up to 21", Silver

Versatile 3-in-1 stand for truing, balancing and checking crank runout; fits cranks up to 11" between centers and rims to 21".

€948.60 €1,192.53

-€87.42

K&L SUPPLY Kwik-Loader Valve Keeper Tool Set — Valve assembly, Black/White

Two-tool set that speeds keeper removal and installation using a removal tool and a hand-operated installation tool for fast, reliable valve service.

€247.03 €334.45

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

-€63.71

K&L SUPPLY Dial Indicator Gauge — Black, SAE, Magnet

Precision dial indicator reads 1.0" in .001" increments; lockable zero; includes magnetic base with adjustable arm.

€180.06 €243.77

-€37.99

K&L SUPPLY Carburetor Service Stand — Black

Positions carburetors for easy access; holds openings 22 mm–41 mm; bench-mountable.

€107.38 €145.37

Deluxe Vacuum Gauge Set — 2" gauges, 0–76 cm/Hg

-€71.68

K&L SUPPLY Deluxe Vacuum Gauge Set — 2" gauges, 0–76 cm/Hg

Includes storage case, rubber hoses, 5 mm and 6 mm adapters; built-in restrictions prevent needle bounce; 2" gauges, 0–76 cm/Hg readings.

€278.76 €350.44

-€8.34

K&L SUPPLY Carburetor Sync Adapters — 170 mm, M5 x 0.8, Set of 2, Silver

Handy adapters that connect your synchronizer to carburetor vacuum ports for accurate tuning and improved idle.

€23.58 €31.92

-€11.28

K&L SUPPLY Carburetor Sync Adapters — M6 x 1.0 thread, 60 mm

Useful tool for syncing your carburetor to achieve accurate vacuum balancing and smoother running.

€31.89 €43.17

-€10.33

K&L SUPPLY MC450 Rubber Pad — Center Jack, black

Rubber non-skid pad with self-adhesive backing mounts on top of the MC450 center jack for added grip and protection.

€29.19 €39.52

MC455 Fat Jack Center Jack — 498 kg (1100 lb), 16 in × 10 in, Gold

-€175.47

K&L SUPPLY MC455 Fat Jack Center Jack — 498 kg (1100 lb), 16 in × 10 in,...

Included self-adhesive rubber nonskid pad; wide nonskid deck for increased lifting stability; lifts front or rear of bikes on MC600-type lifts; compatible with MC464 Fat Jack dolly; do not use air/impact guns.

€495.91 €671.38

MC464 Fat Jack Dolly — 800 lb (362 kg), Gold

-€48.94

K&L SUPPLY MC464 Fat Jack Dolly — 800 lb (362 kg), Gold

Makes a Fat Jack lift mobile for easy, stable shop repositioning. Casters provide smooth movement. Fat Jack sold separately.

€190.33 €239.27

-€49.32

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€191.83 €241.15

-€1.85

TECHNORESEARCH O2 Instal Block — TR200055

Compact sampling block for wideband O2 sensors with vent screw for pressure equalization.

€7.19 €9.04

-€5.67

CUSTOM DYNAMICS LED Road Flare Safety Light — Emergency, Clear, Red

Compact LED road flare with a 360° beacon, three emergency modes, built-in hook and rear magnet. Requires 3 AAA batteries (sold separately).

€22.01 €27.68

Polaris Roll Pin Punch Tool — fits '90–current Polaris ATVs/UTVs (7661913), Black

-€9.89

QUAD LOGIC Polaris Roll Pin Punch Tool — fits '90–current Polaris...

Removes Polaris driveline roll pins (7661913); use with air or standard hammer. Replace the roll pin each time.

€27.97 €37.86

-€383.31

TECHNORESEARCH Centurion Super Pro Plus — Black kit

Advanced electrical system diagnostic tool; not for use with Android-based systems. Optional red USB key (PN# 1020-2868) required for Direct Link.

€1,490.65 €1,873.96

-€172.34

TECHNORESEARCH Complete Oxygen Sensor Installation Kit — O2 sensor, Black, Clear

Fast, all‑in‑one bung kit for O2 sampling and tuning; includes insertion tool, drill bit, sampler blocks, tubing, 25 rivnuts, screws and copper washers.

€669.24 €841.58

-€14.96

TECHNORESEARCH Bung Refill Kit — Silver, Yellow, for 3807-0378

Includes 25 each of bungs, plugs and copper washers. For use with 3807-0378 only.

€58.07 €73.03

-€3.42

CUSTOM DYNAMICS Test Light — Black

Compact tester for 12–24 V DC circuits. Checks for shorts, open circuits and measures voltage for fast troubleshooting.

€10.91 €14.33

SMART Battery Charger & Maintainer with Reconditioning Function — Black

-€19.07

BS BATTERY SMART Battery Charger & Maintainer with Reconditioning...

Smart charger and maintainer with reconditioning mode. Compatible with SLA, GEL, AGM, MF, DRY and Ca/Ca batteries. Charges and maintains batteries up to 30 Ah with built‑in safety protections and a multiaxis hook for easy mounting.

€40.88 €59.95

SMART Battery Charger & Maintainer — Black

-€15.26

BS BATTERY SMART Battery Charger & Maintainer — Black

Smart charging and maintenance unit compatible with SLA, Gel, AGM, MF, Dry, Ca/Ca and LiFePO4. Auto-detects chemistry and includes multiple safety protections.

€32.72 €47.98

SMART Bank Battery Charger and Maintainer with Reconditioning Function — up to 40 Ah, 3-battery, Black/Red

-€62.35

BS BATTERY SMART Bank Battery Charger and Maintainer with Reconditioning...

Smart charger and maintainer with reconditioning and force mode. Auto-detects lead acid and LiFePO4, charges up to three batteries, suitable for batteries up to 40 Ah.

€133.60 €195.95

BT03 Battery Charge Indicator with LED — 12 V, 10 A fuse, 2× M8 eyelets (8.4 mm), 50 cm cable

-€5.09

BS BATTERY BT03 Battery Charge Indicator with LED — 12 V, 10 A fuse, 2×...

3 integrated LEDs: green, orange, red
SAE charge port with weatherproof sealing cap
2x M8 eyelet terminals, 50 cm cable
10 A fuse protection; for 12 V lead acid batteries

€10.91 €16.00

BS10 Battery Charger — 6V/12V, 1A, UK plug

-€14.32

BS BATTERY BS10 Battery Charger — 6V/12V, 1A, UK plug

Smart 1A charger and maintainer for 6V and 12V lead acid and lithium batteries; compact and safe for regular maintenance.

€30.68 €45.00

BS30 Charger UK-Plug — 12V 3A, up to 60Ah, UK plug

-€21.48

BS BATTERY BS30 Charger UK-Plug — 12V 3A, up to 60Ah, UK plug

12V smart 3A charger and maintainer for lead acid & lithium batteries up to 60Ah; 9-stage charging with auto-detect and multiple safety protections. Includes clamps and fused ring terminal.

€46.02 €67.50

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS