TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€36.97

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€54.67 €91.64

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

Blind Hole Puller Set "Puller1" — 8-piece kit, 8–30 mm ID, stainless steel and plastic

-€43.34

BLACK BEARING Blind Hole Puller Set "Puller1" — 8-piece kit, 8–30 mm ID,...

Set of 8 pullers with a lead rod for removing bearings with 8–30 mm internal diameter; stainless steel and plastic construction.

€122.49 €165.83

-€83.89

BLACK BEARING Bearings Assembly Press "Press2" — Blue

Precision bearings assembly press with 34 CNC-machined anodized aluminum shims; includes case and shim kit; fits a wide range of bearing models.

€237.07 €320.96

Bearing Assembly & Disassembly Box — BLACK BEARING, Bearing, Kit

-€177.67

BLACK BEARING Bearing Assembly & Disassembly Box — BLACK BEARING, Bearing, Kit

Case for assembly and disassembly of frame pivot bearings. Not compatible with wheels or bottom brackets. Stainless steel and plastic construction.

€220.66 €398.33

Angle Measuring Tool — Stainless steel, Headset bearing

-€4.33

BLACK BEARING Angle Measuring Tool — Stainless steel, Headset bearing

Precision gauge for headset bearing angles with four measurement points: 36° and 45° inside and outside.

€12.25 €16.58

Flexi-Rigid Manifold Adapter — M5, Black

-€3.06

TECMATE Flexi-Rigid Manifold Adapter — M5, Black

Flexible guide adapter for synchronizing machines with hard-to-reach carburetor or fuel-injection vacuum ports; bend the sheath and turn the inner tube to thread the fitting.

€11.86 €14.92

-€35.09

TECMATE CarbMate — 2-Channel, 12V, Black

Electronic two‑channel synchronizer for carburetors and throttle bodies with a transverse 9‑LED display; accurate to 0.5 cmHg; zero‑adjust knob; powered by 12V battery.

€136.49 €171.58

Fuel Transfer System for Delphi Fuel Injection — Black, Fits '01–'25 Harley-Davidson (except V‑Rod)

-€38.60

FUEL-TOOL Fuel Transfer System for Delphi Fuel Injection — Black, Fits...

Transfers up to one quart every 20 seconds; tool-free connection. Includes storage pouch. Fits '01–'25 Harley-Davidson models (except V‑Rod). Made in the USA.

€109.08 €147.68

-€53.44

FUEL-TOOL Fuel Pressure Check Gauge — Delphi fuel injection, Black

Compact gauge for quick, accurate fuel pressure checks on '01-'25 Harley Davidson Delphi fuel-injected models.

€151.05 €204.49

-€154.42

TECMATE Synchronizer — Yellow

Fast, accurate tool for synchronizing up to four throttle valves; built-in tachometer and rechargeable 7.2 V NiMH battery.

€600.50 €754.92

Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

-€6.00

FUEL-TOOL Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

Replacement hooks for check valve rebuild kit; includes two lower O-ring hooks and two upper O-ring hooks; made in the USA.

€16.98 €22.98

-€49.32

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€191.83 €241.15

-€1.85

TECHNORESEARCH O2 Instal Block — TR200055

Compact sampling block for wideband O2 sensors with vent screw for pressure equalization.

€7.19 €9.04

-€14.05

BLACK BEARING Fork Tool 32 — Black

Tool for installing and removing fork seals on 32 mm forks. Compatible with most brands. Compact and easy to use.

€15.03 €29.08

-€10.82

BLACK BEARING Fork Tool 34 — Black, Seal

Compact service tool compatible with most fork makes and models; simplifies installation and removal of internal components.

€18.26 €29.08

-€7.60

BLACK BEARING Fork Tool 35/36 — Black

Compact installer for fork seals on 35/36 mm forks; compatible with most fork brands.

€21.48 €29.08

-€7.60

BLACK BEARING Fork Tool 38 — Seal, Black

Compact service tool for installing and seating front fork seals; sold individually.

€21.48 €29.08

Weatherproof permanent battery lead, powersport — 10 A, Black, Red

-€3.96

TECMATE Weatherproof permanent battery lead, powersport — 10 A, Black,...

Permanent weatherproof battery lead for powersport vehicles; provides a secure, low-profile permanent connection.

€8.50 €12.46

Charging Cable Extender — 2.5 m, compatible with pre-2015 AccuMate and pre-2012 OptiMate

-€4.49

TECMATE Charging Cable Extender — 2.5 m, compatible with pre-2015...

2.5 m extension cable with SAE connectors to extend charger reach; compatible with pre-2015 AccuMate and pre-2012 OptiMate.

€9.64 €14.13

Charger Replacement Clips — 10 A, Alligator Clamp, Black, Red

-€3.96

TECMATE Charger Replacement Clips — 10 A, Alligator Clamp, Black, Red

Replacement battery clips with easy-grip handles and a TM plug; fits round, square and flat tab posts.

€8.50 €12.46

OptiMate TM72 Cig / DIN Plug — TECMATE, TM72, Electrical System

-€6.08

TECMATE OptiMate TM72 Cig / DIN Plug — TECMATE, TM72, Electrical System

Accessory plug lead for OptiMate/AccuMate chargers with white TM connectors. Fits car cigarette lighter and some motorcycle accessory sockets. Length 50 cm, 18 SWG copper cable. Wired for negative earth vehicles.

€13.05 €19.13

OptiMate Cable O-06 — 50 cm, AUTO to SAE, black

-€4.22

TECMATE OptiMate Cable O-06 — 50 cm, AUTO to SAE, black

Converts SAE to an Ø21 mm AUTO socket; internal locking slots, weatherproof cap, 50 cm length, flexible to -40 °C.

€9.07 €13.29

Replacement Backprobe Set — Ignitionmate, Ignitionmate Duo, Black, Red

-€1.57

TECMATE Replacement Backprobe Set — Ignitionmate, Ignitionmate Duo,...

Small and large scoop shapes for different-sized terminal pins. Replacement parts for IgnitionMate (PART# 3807-0187). Electrical test connector.

€3.39 €4.96

-€207.93

TECMATE BatteryMate 150-9 — 12 V, 1–10 A

Selectable load-tester, desulfator and charger that restores neglected starter batteries and supports MF commissioning charges.

€808.65 €1,016.58

OptiMate Pro 8 6V/12V Charger Station — 8-bank, 6V/12V, 1.2 A, EU plug

-€196.86

TECMATE OptiMate Pro 8 6V/12V Charger Station — 8-bank, 6V/12V, 1.2 A,...

Desulfates, recovers, charges, tests and maintains up to eight batteries independently; safe for standard, gel and AGM; includes clips and extension cables.

€765.56 €962.42

1/4" Eyelet Battery Connection Lead — 508 mm (20 in), 1/4 in eyelet (M6), 12V, 15A fuse

-€3.16

TECMATE 1/4" Eyelet Battery Connection Lead — 508 mm (20 in), 1/4 in...

Premium quick-connect battery lead with rubber-sealed SAE connector, flexible at very low temperatures, fused protection, 1/4" eyelets (M6), 5 A cable rating.

€6.80 €9.96

Charger Cable Adapter — 50 cm (20 in), 12V, black

-€6.08

TECMATE Charger Cable Adapter — 50 cm (20 in), 12V, black

Quickly charge batteries through DIN or auto socket. Inline 8 A fuse and vibration-proof locking clips for safe, reliable connections.

€13.05 €19.13

Charger Cable Extension — 183 cm (6'), 12V, 5A, SAE plug

-€3.43

TECMATE Charger Cable Extension — 183 cm (6'), 12V, 5A, SAE plug

SAE-to-SAE cable extender with industry-standard SAE 2-pin connectors for reliable charger connections.

€7.36 €10.79

Battery Clips O-04 — 12V, 10A, 508 mm, Black, Red

-€3.43

TECMATE Battery Clips O-04 — 12V, 10A, 508 mm, Black, Red

Easy-grip rubber handles; fits round, square and flat-tab posts; industry-standard 2-pin connector; low-temperature rated; in-line rubber seal for heavy-duty connector.

€7.36 €10.79

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS