TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

-€27.58

PSR Roll-On Wheel Chock — 16"–21" wheel fit, front mounting

Heavy-duty, sturdy design. Fits wheels 16"–21".

€107.26 €134.84

-€14.75

PSR Econo Rear Stand — Adjustable 13.75–15 in, White powder-coated

Universal rear stand for swingarms with spools. Adjustable width 13.75"–15". Mild-steel construction. Optional non-spool hardware sold separately (sold in pairs).

€57.36 €72.11

-€5.33

PSR Optional Non-Spool Hardware — Black finish

Optional hardware for supporting motorcycles during maintenance; works without spools.

€20.73 €26.06

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

Blind Hole Puller Set "Puller1" — 8-piece kit, 8–30 mm ID, stainless steel and plastic

-€43.34

BLACK BEARING Blind Hole Puller Set "Puller1" — 8-piece kit, 8–30 mm ID,...

Set of 8 pullers with a lead rod for removing bearings with 8–30 mm internal diameter; stainless steel and plastic construction.

€122.49 €165.83

-€83.89

BLACK BEARING Bearings Assembly Press "Press2" — Blue

Precision bearings assembly press with 34 CNC-machined anodized aluminum shims; includes case and shim kit; fits a wide range of bearing models.

€237.07 €320.96

Bearing Assembly & Disassembly Box — BLACK BEARING, Bearing, Kit

-€104.11

BLACK BEARING Bearing Assembly & Disassembly Box — BLACK BEARING, Bearing, Kit

Case for assembly and disassembly of frame pivot bearings. Not compatible with wheels or bottom brackets. Stainless steel and plastic construction.

€294.22 €398.33

Angle Measuring Tool — Stainless steel, Headset bearing

-€4.33

BLACK BEARING Angle Measuring Tool — Stainless steel, Headset bearing

Precision gauge for headset bearing angles with four measurement points: 36° and 45° inside and outside.

€12.25 €16.58

Heavy-Duty Adjustable PWC Stand — 36.83 cm (14-1/2 in), 58.42 cm (23 in), 635 kg (1400 lb) capacity

-€86.24

EAZYMOVE Heavy-Duty Adjustable PWC Stand — 36.83 cm (14-1/2 in), 58.42...

Adjustable for stand-up and runabout PWC models
Carpeted bunks protect the hull
Made in the USA
Extension kit, replacement wheels and carpeted bunk sold separately

€335.36 €421.60

Fuel Transfer System for Delphi Fuel Injection — Black, Fits '01–'25 Harley-Davidson (except V‑Rod)

-€38.60

FUEL-TOOL Fuel Transfer System for Delphi Fuel Injection — Black, Fits...

Transfers up to one quart every 20 seconds; tool-free connection. Includes storage pouch. Fits '01–'25 Harley-Davidson models (except V‑Rod). Made in the USA.

€109.08 €147.68

-€22.17

PSR Deluxe Rear Wheel Stand — 5-1/2" (13.97 cm), Black, Rear

Rear stand with included spooled lifting hardware, tool-less adjusters, and large wheels for easy rolling.

€86.23 €108.40

-€13.88

PSR MX Lite Lift Stand — Black, powder-coated

Simple, light and durable stand for dirtbikes. Rubber padded lifting platform protects the frame and gives secure contact.

€53.98 €67.86

-€7.60

BLACK BEARING Fork Tool 32 — Black

Tool for installing and removing fork seals on 32 mm forks. Compatible with most brands. Compact and easy to use.

€21.48 €29.08

-€7.60

BLACK BEARING Fork Tool 34 — Black, Seal

Compact service tool compatible with most fork makes and models; simplifies installation and removal of internal components.

€21.48 €29.08

-€7.60

BLACK BEARING Fork Tool 35/36 — Black

Compact installer for fork seals on 35/36 mm forks; compatible with most fork brands.

€21.48 €29.08

-€7.60

BLACK BEARING Fork Tool 38 — Seal, Black

Compact service tool for installing and seating front fork seals; sold individually.

€21.48 €29.08

-€5.54

ANDREWS Gauge Pins — 0.105" (2.67 mm) outside diameter, silver

Pins for measuring cam drive gear outside diameters; covers measurement differences between '84–'99 models.

€21.52 €27.06

-€5.90

ANDREWS Gauge Pins — 0.108" outside diameter

Used to measure the outside diameter of cam drive gears. Made in the USA. Ideal for cam gear inspection.

€22.94 €28.84

-€20.91

BARNETT Clutch Spring Compression Tool — Black

Compresses diaphragm clutch springs for easy removal and reinstallation of retainer rings. Made in the USA.

€81.32 €102.23

-€11.50

BARNETT Clutch Spring Compression Tool — Black

Tool for removal and reinstallation of retainer rings on diaphragm clutches. Durable and compact for shop or home use. Made in the USA.

€44.69 €56.19

Tie-Down Clamp — 31.8 mm (1-1/4"), anodized

-€12.89
Out of Stock

PSR Tie-Down Clamp — 31.8 mm (1-1/4"), anodized

Instant anchor points with an oval opening for single or double hooks. Rubber insert protects fork surfaces.

€50.14 €63.03

-€13.22
Out of Stock

PSR Fork Tube Tie-Down — 60 mm (2.4 in) I.D., anodized

Patented clamp for tie-down anchoring on most MX upside-down forks; rubber insert protects fork; 60 mm I.D.; pair.

€51.39 €64.61

Tie-Down Clamp — 25.4 mm (1"), pair, anodized

-€14.16
Out of Stock

PSR Tie-Down Clamp — 25.4 mm (1"), pair, anodized

Instant anchor points for most powersport vehicles. Oval opening fits single or double hooks. Rubber insert protects fork surfaces.

€55.03 €69.19

Tie-Down Clamp — 38.1 mm (1-1/2 in), Anodized

-€14.16
Out of Stock

PSR Tie-Down Clamp — 38.1 mm (1-1/2 in), Anodized

Instant anchor points for tie-downs on most powersport vehicles. Oval opening for single or double hooks; rubber insert protects fork surfaces.

€55.03 €69.19

Replacement Pin for Mario™ Single-Sided Stand — 21.7 mm (0.85"), bronze, fits Ducati (except 1098)

-€9.08
Out of Stock

PSR Replacement Pin for Mario™ Single-Sided Stand — 21.7 mm...

Replacement pin for single-sided rear stands. Sold individually. Verify fitment before purchase.

€35.33 €44.41

Big Mike Triple Tree Stand Pins — 19 mm (0.75") pin diameter, front

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 19 mm (0.75") pin diameter,...

Model-specific triple tree pins; order by steering stem hole size. Intended for use with front stands.

€13.53 €17.02

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 13 mm, front, zinc

Model-specific triple tree pins ordered by steering stem hole size; fit compatible lifting stands for front-end maintenance.

€13.53 €17.02

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 16.75 mm pin, Front, Zinc

Pins for use with front stands. Order by steering stem hole size. Model-specific fit for triple tree setups.

€13.53 €17.02

Big Mike Triple Tree Stand Pins — 15.7 mm pin diameter, front mount

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 15.7 mm pin diameter, front...

Model-specific triple tree stand pins ordered to match steering stem hole size for use with front stands.

€13.53 €17.02

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS