TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

-€9.82

JIMS Replacement Wheel Bearing Expander Rod — Black

Replacement expander rod for sealed wheel bearing remover/installer kits. Made in the USA.

€38.18 €48.00

-€16.21

JIMS Pinion Gear Locker Tool — Pinion gear, Black

Locks the pinion gear for torquing the pinion nut. Easy to align and install.

€63.02 €79.23

Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer Tool — Black

-€110.03

JIMS Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer...

Holds the main drive gear square to its bearing bore and installs it without removing the transmission. Made in the USA.

€427.86 €537.89

Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing Installer Tool — Black

-€71.05

JIMS Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing...

Safely installs main transmission case bearings in Harley Davidson Cruise Drive 6-Speed units without removing the bearing; holds bearing square to bore; made in the USA.

€276.32 €347.37

-€16.38

JIMS Primary Locking Bar — Front engine sprocket, Black

Immobilizes the primary drive for safe maintenance; use with a torque wrench or breaker bar. Made in the U.S.A.

€63.72 €80.10

-€57.61

JIMS Transmission Sprocket Locknut Wrench — Black

Extra-long two-piece wrench designed to remove the hex nut at the end of the main drive gear. Inner collar retains wrench to nut for safer work.

€224.02 €281.63

-€8.25

JIMS Shifter Fork Shaft Removal Tool — Black, Chrome

Loosens and removes both shifter shafts from the transmission door for easy disassembly. Made in the USA.

€32.09 €40.34

Harley Davidson Cruise Drive Trap Door Bearing Remover and Installer — 6-speed, Black

-€89.22

JIMS Harley Davidson Cruise Drive Trap Door Bearing Remover and...

Installs and removes lubed ball bearings into transmission trap doors; no arbor press required. Made in the U.S.A.

€346.97 €436.19

Replacement Puller Plate — Black, Chrome

-€21.50

JIMS Replacement Puller Plate — Black, Chrome

Spare extraction plate for mainshaft bearing race tools. Made in the USA.

€83.63 €105.13

Inner Primary Bearing and Seal Removal and Installation Tool — Black, Chrome

-€69.45

JIMS Inner Primary Bearing and Seal Removal and Installation Tool —...

Precision tool for removal and installation of inner primary bearings and seals; eliminates the need for a press and reduces risk of part damage.

€270.08 €339.53

Late Model Wheel Bearing Puller/Hub Protector Support Plate — Black

-€31.10

JIMS Late Model Wheel Bearing Puller/Hub Protector Support Plate —...

Plate attaches to brake rotor mounting holes to provide a stable surface for bearing removal and installation; fits open-hub wheels with 5 or 7 lugs. Made in USA.

€120.93 €152.03

Ultimate Clutch Adjusting Tool — Blue, Chrome, '85-'20 Big Twins

-€20.57

JIMS Ultimate Clutch Adjusting Tool — Blue, Chrome, '85-'20 Big Twins

Quickly and accurately tighten the clutch adjusting screw jam nut without moving the screw. Includes Allen wrench that stores in the handle. Made in the USA. Fits all '85-'20 Big Twins with mechanical clutch.

€79.99 €100.56

-€22.28

JIMS XL Sprocket Nut Socket Tool — Black

Short socket designed to remove, install and properly tighten the front final drive sprocket/pulley on Harley-Davidson® Sportster models; provides full contact to the nut.

€86.61 €108.89

-€11.49

JIMS Primary Locking Bar — Primary (Drive), Black

Immobilizes the primary drive for safe maintenance; allows torque-wrench tightening or breaker-bar loosening. Made in the U.S.A.

€44.67 €56.16

Compensator Bolt Torx® Socket — Compensator Bolt Driver, JIMS 5534, Chrome

-€4.45

JIMS Compensator Bolt Torx® Socket — Compensator Bolt Driver, JIMS...

Correct-style Torx driver/socket for the compensating sprocket retaining fastener. Made in the USA.

€17.32 €21.77

-€3.84

PEDRO'S Bicycle Chain Keeper — Black

Holds the chain off the frame when the rear wheel is removed so the drivetrain can turn freely for cleaning, storage, or transport. Quick-release lever for fast installation and removal.

€8.64 €12.48

PEDRO'S Pro Chain Keeper — 12mm thru axle, yellow

Replaces the rear wheel to hold chain tension during cleaning, storage, or transport; quick one-handed install on QR-style dropouts; removable pulley for 12mm thru axles.

€29.67

PEDRO'S Toothbrush Drivetrain Cleaning Brush — Black, Yellow

Double-ended ergonomic brush for chains, cassettes and derailleurs. Solvent-resistant synthetic handle and bristles. Not for oral use.

€6.14

PEDRO'S Crank Adjuster Cap Driver — Black/Yellow

Precision driver for Shimano Hollowtech II with ergonomic dual-density handle and heat-treated tool steel bit.

€12.78

PEDRO'S Bottom Bracket Wrench II — 16-notch, 44 mm, yellow

Precision laser-cut wrench for 16-notch 44 mm external bottom bracket cups and rotor lockrings. Cushioned grip and stainless steel construction for professional use.

€22.41

PEDRO'S Universal Crank Remover — Crank tool, Yellow

Universal crank remover for splined Octalink and ISIS Drive cranks; stainless steel and rubber construction.

€22.64

Travel Chain Keeper — Black, Gold, fits 130/135 QR and 12x157mm thru axle

PEDRO'S Travel Chain Keeper — Black, Gold, fits 130/135 QR and...

Protects the rear triangle during travel; adjustable for 130/135 QR and 12mm thru axles up to 12x157. Aluminum body with solvent‑resistant plastic pulley.

€57.16

PEDRO'S Pro Cassette Lockring Socket with pin — Lock Ring, Black, Yellow

Precision-machined alloy tool steel socket with 5mm guide pin and removable magnetic 12mm pin, extra-deep splines, quick-spin knurling, 3/8" drive, 24mm external drive, 19.8mm ID.

€34.43

Pro Cassette Lockring Socket without pin — 3/8" square drive, 24mm external, 19.8mm ID × 21.5mm depth

PEDRO'S Pro Cassette Lockring Socket without pin — 3/8" square drive,...

Precision alloy-steel socket for HG® standard cassette and disc brake lockrings. Extra-deep splines, quick-spin knurling, 3/8" square drive, 24mm external.

€25.99

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

Professional Fuel Injection Pressure Test Tool — Fuel pressure, Black

-€139.24

JIMS Professional Fuel Injection Pressure Test Tool — Fuel...

Quick in-line fuel pressure testing for Delphi injected models. Performs road and dyno checks efficiently. Includes gauge, hoses, valves, adapter and carrying case. Not for '18-'20 Softails.

€541.45 €680.69

-€48.12

JIMS Fuel Pump Retainer Remover Tool — Black

Quick removal and installation of the fuel pump retaining ring. Heavy-duty construction. Made in the USA.

€187.15 €235.27

-€10.56

JIMS In-Line Spark Tester — Black

Quick, easy visual spark check for all ignition systems; made in the USA.

€41.03 €51.59

-€20.26

JIMS O² Sensor Wrench — Black

Removes and installs O² sensors without removing exhaust pipes. Fits 12 mm sensors. Made in the USA.

€78.77 €99.03

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS