TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

-€9.82

JIMS Replacement Wheel Bearing Expander Rod — Black

Replacement expander rod for sealed wheel bearing remover/installer kits. Made in the USA.

€38.18 €48.00

-€16.21

JIMS Pinion Gear Locker Tool — Pinion gear, Black

Locks the pinion gear for torquing the pinion nut. Easy to align and install.

€63.02 €79.23

Flywheel Puller Right Hand Internal Thread — M30 x 1.0, Black oxide

-€8.86

MOTION PRO Flywheel Puller Right Hand Internal Thread — M30 x 1.0, Black...

Durable, heat-treated puller for safe flywheel or rotor removal. Right hand thread. Lifetime limited warranty.

€25.06 €33.92

Flywheel Puller Right Hand Internal Thread — M24 x 1.5, right-hand thread, black oxide

-€8.70

MOTION PRO Flywheel Puller Right Hand Internal Thread — M24 x 1.5,...

Precision flywheel puller with right-hand internal thread. Heat treated, durable protective finish, lifetime limited warranty.

€24.60 €33.30

Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer Tool — Black

-€110.03

JIMS Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer...

Holds the main drive gear square to its bearing bore and installs it without removing the transmission. Made in the USA.

€427.86 €537.89

Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing Installer Tool — Black

-€71.05

JIMS Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing...

Safely installs main transmission case bearings in Harley Davidson Cruise Drive 6-Speed units without removing the bearing; holds bearing square to bore; made in the USA.

€276.32 €347.37

-€16.38

JIMS Primary Locking Bar — Front engine sprocket, Black

Immobilizes the primary drive for safe maintenance; use with a torque wrench or breaker bar. Made in the U.S.A.

€63.72 €80.10

-€57.61

JIMS Transmission Sprocket Locknut Wrench — Black

Extra-long two-piece wrench designed to remove the hex nut at the end of the main drive gear. Inner collar retains wrench to nut for safer work.

€224.02 €281.63

-€8.25

JIMS Shifter Fork Shaft Removal Tool — Black, Chrome

Loosens and removes both shifter shafts from the transmission door for easy disassembly. Made in the USA.

€32.09 €40.34

Harley Davidson Cruise Drive Trap Door Bearing Remover and Installer — 6-speed, Black

-€89.22

JIMS Harley Davidson Cruise Drive Trap Door Bearing Remover and...

Installs and removes lubed ball bearings into transmission trap doors; no arbor press required. Made in the U.S.A.

€346.97 €436.19

Replacement Puller Plate — Black, Chrome

-€21.50

JIMS Replacement Puller Plate — Black, Chrome

Spare extraction plate for mainshaft bearing race tools. Made in the USA.

€83.63 €105.13

Inner Primary Bearing and Seal Removal and Installation Tool — Black, Chrome

-€69.45

JIMS Inner Primary Bearing and Seal Removal and Installation Tool —...

Precision tool for removal and installation of inner primary bearings and seals; eliminates the need for a press and reduces risk of part damage.

€270.08 €339.53

Late Model Wheel Bearing Puller/Hub Protector Support Plate — Black

-€31.10

JIMS Late Model Wheel Bearing Puller/Hub Protector Support Plate —...

Plate attaches to brake rotor mounting holes to provide a stable surface for bearing removal and installation; fits open-hub wheels with 5 or 7 lugs. Made in USA.

€120.93 €152.03

Ultimate Clutch Adjusting Tool — Blue, Chrome, '85-'20 Big Twins

-€20.57

JIMS Ultimate Clutch Adjusting Tool — Blue, Chrome, '85-'20 Big Twins

Quickly and accurately tighten the clutch adjusting screw jam nut without moving the screw. Includes Allen wrench that stores in the handle. Made in the USA. Fits all '85-'20 Big Twins with mechanical clutch.

€79.99 €100.56

-€22.28

JIMS XL Sprocket Nut Socket Tool — Black

Short socket designed to remove, install and properly tighten the front final drive sprocket/pulley on Harley-Davidson® Sportster models; provides full contact to the nut.

€86.61 €108.89

-€11.49

JIMS Primary Locking Bar — Primary (Drive), Black

Immobilizes the primary drive for safe maintenance; allows torque-wrench tightening or breaker-bar loosening. Made in the U.S.A.

€44.67 €56.16

Compensator Bolt Torx® Socket — Compensator Bolt Driver, JIMS 5534, Chrome

-€4.45

JIMS Compensator Bolt Torx® Socket — Compensator Bolt Driver, JIMS...

Correct-style Torx driver/socket for the compensating sprocket retaining fastener. Made in the USA.

€17.32 €21.77

Counter Balancer and Clutch Hub Spanner for Honda — 20 mm ID, 3/8" driver, 4-pin spanner

-€2.96

MOTION PRO Counter Balancer and Clutch Hub Spanner for Honda — 20 mm ID,...

Heat-treated 4-pin spanner for removing Honda counter balancer and clutch hub nuts. 20 mm ID, for use with a 3/8" driver.

€8.38 €11.34

Clutch Adjuster Nut Tool — 11/16" clutch adjuster lock nut, fits '98 and later Big Twin Harley-Davidson models, black

-€4.38

MOTION PRO Clutch Adjuster Nut Tool — 11/16" clutch adjuster lock nut,...

Through-hole design holds the clutch adjuster screw while tightening the 11/16" lock nut; deep socket fits into the clutch basket; compact for saddlebags. Not for hydraulic clutches.

€12.40 €16.78

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

SyncPro™ Carburetor Tuner — 2- to 4-cylinder four-stroke fit, 40 cm Hg max vacuum

-€40.86

MOTION PRO SyncPro™ Carburetor Tuner — 2- to 4-cylinder four-stroke fit,...

Four-channel vacuum indicator for synchronizing intake on 2–4 cylinder four-stroke motorcycles; spill-proof and mercury-free.

€115.47 €156.33

Professional Fuel Injection Pressure Test Tool — Fuel pressure, Black

-€139.24

JIMS Professional Fuel Injection Pressure Test Tool — Fuel...

Quick in-line fuel pressure testing for Delphi injected models. Performs road and dyno checks efficiently. Includes gauge, hoses, valves, adapter and carrying case. Not for '18-'20 Softails.

€541.45 €680.69

-€48.12

JIMS Fuel Pump Retainer Remover Tool — Black

Quick removal and installation of the fuel pump retaining ring. Heavy-duty construction. Made in the USA.

€187.15 €235.27

-€10.56

JIMS In-Line Spark Tester — Black

Quick, easy visual spark check for all ignition systems; made in the USA.

€41.03 €51.59

-€20.26

JIMS O² Sensor Wrench — Black

Removes and installs O² sensors without removing exhaust pipes. Fits 12 mm sensors. Made in the USA.

€78.77 €99.03

-€1.18

MOTION PRO Replacement D-Shaped Bit — D-shaped, Silver, 08-0242

Replacement d-shaped bit with durable nickel pewter finish. Compatible with part #08-0229.

€3.33 €4.51

-€2.37

MOTION PRO SyncPro™ Fluid Refill — 6 ml, Blue

Manometer fluid refill for SyncPro™ carb tuner. Approximately 6 ml bottle. Mercury-free. Not compatible with older mercury-based synchronizers.

€6.68 €9.05

Fuel Injector Cleaner Kit for Nippon Denso — Nippon Denso fitment, 9V battery, Blue anodized

-€53.28

MOTION PRO Fuel Injector Cleaner Kit for Nippon Denso — Nippon Denso...

Push‑button injector actuation with LED battery indicator
Fits most OEM Nippon Denso motorcycle injectors
Flush and back‑flush cleaning; compressed air not required
Includes tool, pigtail and 9V battery; durable billet aluminum construction

€150.58 €203.86

-€5.91

MOTION PRO Replacement Fuel Injector Pigtail — For Nippon Denso, Gray

Replacement fuel injector pigtail sold as pigtail only; fits compatible fuel injector cleaning systems.

€16.70 €22.61

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS