TOOLS

-€2.29
Out of Stock

MOTION PRO Dual Drive Mini T-Handle Tool — 1/4" drive, 165.1 mm (6-1/2")

T-handle and shaft drive for tight access; works with sockets, hex drives and crow's foot adapters; compact and durable.

€6.49 €8.78

-€2.20
Out of Stock

DRAG SPECIALTIES Cargo Net — 38 cm (15") x 38 cm (15"), plastic hooks, black

Elastic cargo net with 2.5" x 2.5" mesh; secures loads quickly and stores compactly.

€6.23 €8.43

Ti Prolight™ Wrench Set — 8 mm, 10 mm, 12 mm, 14 mm, Silver

-€42.73
Out of Stock

MOTION PRO Ti Prolight™ Wrench Set — 8 mm, 10 mm, 12 mm, 14 mm, Silver

Extremely lightweight — less than one quarter the weight of a standard wrench. Exclusive optimized design with an ergonomic handle. Not intended for everyday shop use.

€120.75 €163.48

-€24.54
Out of Stock

MOTION PRO Wheel Bearing Remover Set — 8-piece, 10–25 mm, metric, black

Eight-piece bearing remover kit with large and small driver rods and removers for 10–25 mm bearings. Dependable split collet design and heat treated for longevity.

€69.38 €93.92

-€1.48
Out of Stock

MOTION PRO Combo Hex Bit — 3 mm, 4 mm, nickel pewter

Dual-purpose hex bit that fits Motion Pro® Deep Socket and T-Handle Wrench; rubber O-ring secures the bit.

€4.17 €5.65

-€8.56
Out of Stock

MOTION PRO Spinner II T-Handle Tool with Swivel Drive — 12" (30.5 cm),...

Bearing-mounted spinner for faster bolt and nut removal. Two-step drive head for swivel or fixed drive. Chrome-vanadium handle with padded grip.

€24.23 €32.79

-€8.59
Out of Stock

MOTION PRO Spinner II T-Handle Tool with Swivel Drive — 12", 1/4", Blue

Bearing-mounted spinner for faster bolt and nut removal; two-step drive head for swivel or fixed drive; padded grip for comfort.

€24.26 €32.85

-€22.19
Out of Stock

MOTION PRO Flywheel Puller Internal Thread — M50 x 1.5, Black oxide

Removes flywheel or rotor. Heat-treated for strength. Laser-etched identification. Includes crank protector. Right-hand thread. Durable corrosion-resistant finish. Lifetime limited warranty.

€62.68 €84.87

-€9.02
Out of Stock

DRAG SPECIALTIES Starter Jackshaft Wrench — 3802-0071, Silver

Slides over the jackshaft and holds it by the splines without damage; double-sided for easy removal of the jackshaft assembly.

€25.51 €34.53

1" Standard Tie-Downs — 72" length, 1" width, 4,500 lb tensile, Black

-€10.47
Out of Stock

DRAG SPECIALTIES 1" Standard Tie-Downs — 72" length, 1" width, 4,500 lb...

Durable nylon tie-downs with industrial cam buckle and vinyl-coated hooks. Sold as a pair.

€29.53 €40.00

-€3.28
Out of Stock

DRAG SPECIALTIES Soft-Tie 18" Extensions — 18", 2041 kg (4500 lb), Black

Gentle, scratch-safe tie-down extensions ideal for bars and tight attachment points. Made in the U.S.A.

€9.30 €12.58

Plush Soft-Tie Cover — 12", 1-1/2" width, fits 1" and 1.5" tie-downs, Black

-€4.94
Out of Stock

DRAG SPECIALTIES Plush Soft-Tie Cover — 12", 1-1/2" width, fits 1" and 1.5"...

Slides over existing tie-down extensions to protect paint and chrome. Made in the U.S.A.

€13.97 €18.91

Valve Stem Seal Tool — 4 mm, Blue anodized

-€3.85
Out of Stock

MOTION PRO Valve Stem Seal Tool — 4 mm, Blue anodized

Contoured install tools that protect valve stem seals, hold four seals at once, and ensure straight, damage-free installation.

€10.85 €14.70

-€5.15
Out of Stock

SW-MOTECH Legend Gear Shoulder Strap

The Legend Gear LA4 shoulder strap is designed to convert series bags into a comfortable shoulder bag with adjustable length and durable materials.

€20.06 €25.21

-€2.24
Out of Stock

SW-MOTECH Retention Straps for Drybag M/L — 4-pack, black

Replacement retention straps compatible with Drybag M and Drybag L. Pack includes four straps for straightforward swap-out.

€8.68 €10.92

Strap Set Legend — 4 loop straps (80 cm), 2 mounting straps (100 cm), Black

-€1.38
Out of Stock

SW-MOTECH Strap Set Legend — 4 loop straps (80 cm), 2 mounting straps...

Four 80 cm loop straps and two 100 cm mounting straps for securing Legend Gear bags. Polyamide webbing with anodized aluminum buckles.

€5.34 €6.72

Crankcase Splitter V2 — Aluminum and steel, black and blue anodized

-€52.83
Out of Stock

MOTION PRO Crankcase Splitter V2 — Aluminum and steel, black and blue...

Fast, easy-to-use crankcase splitter with 5 mm, 6 mm and 8 mm puller stud threads, captured retaining collars, grooved studs and molded storage tray.

€205.44 €258.27

Clutch Adjuster Nut Tool — 11/16" clutch adjuster lock nut, fits '98 and later Big Twin Harley-Davidson models, black

-€4.38
Out of Stock

MOTION PRO Clutch Adjuster Nut Tool — 11/16" clutch adjuster lock nut,...

Through-hole design holds the clutch adjuster screw while tightening the 11/16" lock nut; deep socket fits into the clutch basket; compact for saddlebags. Not for hydraulic clutches.

€12.40 €16.78

-€3.08
Out of Stock

DRAG SPECIALTIES Clear Timing Hole Plug — 41.3 mm (1-5/8"), timing mark

Locates the timing mark without getting an eye full of oil.

€8.72 €11.80

-€5.17
Out of Stock

MOTION PRO Tri Drive Mini T-Handle Kit — 6.4 mm (1/4"), 152.4 mm (6")

Compact T-handle kit for quick installation and removal of fasteners; includes 8, 10, 12, 13 mm sockets.

€14.64 €19.81

-€2.52
Out of Stock

MOTION PRO Mini Spring Hook — Blue, Silver

For use on exhaust, seat and tank springs, cotter pins and side stand springs. Ergonomic handle and compact size for easy access.

€7.11 €9.63

-€1.18
Out of Stock

MOTION PRO Replacement D-Shaped Bit — D-shaped, Silver, 08-0242

Replacement d-shaped bit with durable nickel pewter finish. Compatible with part #08-0229.

€3.33 €4.51

Spanner Nut Socket — 3/8" drive, Black oxide

-€15.38
Out of Stock

MOTION PRO Spanner Nut Socket — 3/8" drive, Black oxide

Designed for reliable removal and installation of spanner (castle) lock nuts. Heat-treated for durability and backed by a lifetime limited warranty.

€43.45 €58.83

-€5.91
Out of Stock

MOTION PRO Replacement Fuel Injector Pigtail — For HYB Fuel Injector, Black

Replacement connector for fuel injectors. Connector only; wiring and adapters sold separately.

€16.70 €22.61

-€35.13
Out of Stock

DRAG SPECIALTIES Oil Extractor — 6.5 L (1.72 US gal), Black, Clear

Sturdy and portable oil extractor for cleaner, faster fluid removal.

€99.26 €134.39

-€12.12
Out of Stock

MOTION PRO Spanner Nut Socket — 1/2" drive, Swingarm, Black oxide

Tool for removing and installing spanner (castle) lock nuts. Laser-etched ID, heat-treated high-carbon construction, lifetime limited warranty.

€34.26 €46.38

Replacement Fuel Injector Pigtail — For EV1 fuel injector, Black, Gray

-€5.91
Out of Stock

MOTION PRO Replacement Fuel Injector Pigtail — For EV1 fuel injector,...

Connector lead for fuel injector cleaning systems. Connector only; wiring harness not included.

€16.70 €22.61

Spanner Nut Socket — 1/2" drive, motor mount/swingarm, black oxide

-€16.26
Out of Stock

MOTION PRO Spanner Nut Socket — 1/2" drive, motor mount/swingarm, black...

Durable spanner nut socket for installing and removing castle lock nuts. Heat-treated high carbon steel with laser-etched ID. Lifetime limited warranty.

€45.97 €62.23

-€5.91
Out of Stock

MOTION PRO Replacement Fuel Injector Pigtail — For HV2 fuel injector, Black

Replacement pigtail connector for use with fuel injector cleaners. Pigtail only; sold individually.

€16.70 €22.61

-€1.44
Out of Stock

MOTION PRO JIS Cross-Head Hex-Drive Bits — #2, Black

Fits JIS cross-head screws to reduce cam-out and prevent screw-head damage; also works on Phillips screws.

€4.03 €5.47

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS