TOOLS

1" W Tie-Down Extensions — 1" wide, 18" long, Red

-€1.94

PARTS UNLIMITED 1" W Tie-Down Extensions — 1" wide, 18" long, Red

Soft tie-down extensions that protect finishes and extend reach. Durable straps for reliable restraint.

€6.32 €8.26

1" W Tie-Down Extensions — 1" wide, 45.5 cm (18"), Black

-€1.94

PARTS UNLIMITED 1" W Tie-Down Extensions — 1" wide, 45.5 cm (18"), Black

Extend reach or use as soft ties to protect handlebars and finishes. Made of 1" top-quality web straps. 18" L with loops on both ends.

€6.32 €8.26

-€3.35

PARTS UNLIMITED Jumper Cable — 183 cm (6'), Black, Red

Smaller clamps fit motorcycle, snowmobile, ATV and PWC batteries; insulated color‑coded terminal clamps; 10‑gauge jumper cable set.

€10.88 €14.23

-€1.94

PARTS UNLIMITED 1" W Tie-Down Extensions — 18" long, Blue

Extend reach or use as soft ties to protect finishes. Durable webbing with reinforced looped ends.

€6.32 €8.26

-€5.57

PARTS UNLIMITED 1" Heavy-Duty Ratcheting Tie-Down — 72", 1", 400 lb, Red

Ratcheting tie-down with built-in assist and 3/8" hooks; adjustable strap for secure load control.

€18.08 €23.65

-€5.57

PARTS UNLIMITED 1" Heavy-Duty Ratcheting Tie-Down — 72", 400 lb

Heavy-duty ratcheting tie-down with built-in assist and 3/8" hooks for reliable cargo restraint.

€18.08 €23.65

Pinion Gear Locker Tool — pinion gear, Black

-€13.98

JIMS Pinion Gear Locker Tool — pinion gear, Black

Locks the gear while torquing the nut; aligns under the gear and screws into the case. Made in the U.S.A.

€65.25 €79.23

1" Heavy-Duty Ratcheting Tie-Down — 1" x 72", 400 lb (181 kg), blue

-€5.57

PARTS UNLIMITED 1" Heavy-Duty Ratcheting Tie-Down — 1" x 72", 400 lb (181 kg),...

Built-in assist for easier ratcheting, 3/8" hooks, secure cargo tie-down for trailers, motorcycles, and general use.

€18.08 €23.65

-€6.20

PARTS UNLIMITED Clutch Puller — Black

Precision-machined clutch puller made from high-quality materials for reliable performance and easy maintenance.

€20.18 €26.38

Scorpion Clutch Hub Puller — Orange, Anodized

-€16.17

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€75.47 €91.64

Tri-fold Adjustable Ramp — 76 in length, 52 in width

-€44.95

MOOSE OFFROAD FOUR WHEEL Tri-fold Adjustable Ramp — 76 in length, 52 in width

Adjustable tri-fold ramp, fits 42–52 in, 1,250-lb. distributed capacity, bar-style traction surface; includes E‑Z grip rubber truckrests and nylon straps. Do not ride ATV on ramp.

€205.00 €249.95

$Arched Aluminum Folding Ramp — 229 cm (90\") length, 270 kg (595 lb) load capacity$

-€21.95

MOOSE OFFROAD HARD-PARTS Arched Aluminum Folding Ramp — 229 cm (90\") length, 270 kg...

Durable, lightweight aluminum arched folding ramp with E-Z grip rubber rests and nylon safety straps. Weighs only 13 lb. Maximum load 600 lb. Do not ride motorcycle on ramp.

€79.00 €100.95

-€71.95

MOOSE OFFROAD HARD-PARTS 6 Foot Ramp — 6 ft, 300 lb capacity, 4-pack

Aircraft-aluminum straight ramp with dimpled traction holes, rubber-coated tongue and stop-pin. Sold to dealers in 4-packs. Do not ride a motorcycle on the ramp.

€207.00 €278.95

-€14.27

PARTS UNLIMITED Main Jet Carrier — Black, holds 19 jets

Organizes up to 19 spare jets; includes a wrench for removal and storage.

€46.36 €60.63

$Aluminum Straight Folding Ramp — 213 cm (84\") , 180 kg (396 lb)$

-€24.95

MOOSE OFFROAD HARD-PARTS Aluminum Straight Folding Ramp — 213 cm (84\") , 180 kg (396 lb)

Folding straight aluminum ramp with rubber-coated fingers; folds flat for storage. Max load: 400 lb. Do not ride motorcycle on ramp.

€55.00 €79.95

-€151.95

MOOSE OFFROAD FOUR WHEEL UTV Loading Ramp — 241 cm (95"), 45.5 cm (18"), Aluminum

Heavy-duty loading ramps with EZ-grip rubber rests and nylon straps. Do not ride UTV or ATV on the ramp.

€398.00 €549.95

Sprocket Lock Tool — Crankshaft, camshaft, Black

-€20.47

JIMS Sprocket Lock Tool — Crankshaft, camshaft, Black

Locks camshafts and crankshaft sprockets for safe removal, replacement and torquing. Includes instructions. Made in the U.S.A.

€95.53 €116.00

-€72.84

JIMS Inner Cam Bearing Removal Tool — Kit, Black

Purpose-built tool for removing inner cam bearings without damaging the crankcase; includes instructions and retention design to prevent rollers from falling into the engine.

€339.92 €412.76

-€8.47

JIMS Replacement Wheel Bearing Expander Rod — Black

Replacement expander rod for sealed wheel bearing remover/installer kits. Made in the USA.

€39.53 €48.00

-€85.79

JIMS Case Splitter Tool — Crankcase, Black

Separates sealed engine case halves using a hand thread-in pushing screw; bolts to primary mounting holes. Made in the U.S.A.

€400.34 €486.13

-€23.31

JIMS Valve Spring Compressor — Valve Spring, Gray

Removes and replaces valves and new-style conical valve springs. Requires the dedicated valve spring compressor tool. Made in the U.S.A.

€108.80 €132.11

-€13.98

JIMS Pinion Gear Locker Tool — Pinion gear, Black

Locks the pinion gear for torquing the pinion nut. Easy to align and install.

€65.25 €79.23

Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer Tool — Black

-€94.93

JIMS Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer...

Holds the main drive gear square to its bearing bore and installs it without removing the transmission. Made in the USA.

€442.96 €537.89

Heavy Duty Straight-Folding Ramp — 80" x 11" (203 x 28 cm), 362 kg (800 lb), Powder Coated

-€20.95

MOOSE OFFROAD HARD-PARTS Heavy Duty Straight-Folding Ramp — 80" x 11" (203 x 28 cm),...

Center-folding mesh ramp with welded carrying handle, rubber-coated fingers, and included tie down straps. Warning: do not ride motorcycles or ATVs on the ramp.

€78.00 €98.95

Recovery/Traction Boards — 104 cm (41"), 30 cm (11.75"), 10,000 lb capacity, red

-€21.95

MOOSE OFFROAD HARD-PARTS Recovery/Traction Boards — 104 cm (41"), 30 cm (11.75"),...

Reinforced nylon recovery boards that flex under load and assist in freeing vehicles from mud, snow, and sand. Mounting hardware included.

€50.00 €71.95

Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing Installer Tool — Black

-€61.30

JIMS Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing...

Safely installs main transmission case bearings in Harley Davidson Cruise Drive 6-Speed units without removing the bearing; holds bearing square to bore; made in the USA.

€286.07 €347.37

$Recovery/Traction Boards — 104 cm (41\"), 30 cm (11-3/4\"), 10,000 lb capacity$

-€21.95

MOOSE OFFROAD HARD-PARTS Recovery/Traction Boards — 104 cm (41\"), 30 cm (11-3/4\"),...

Durable reinforced nylon recovery boards offering flexibility and support for recoveries in mud, snow, and sand; mounting hardware included.

€50.00 €71.95

-€14.14

JIMS Primary Locking Bar — Front engine sprocket, Black

Immobilizes the primary drive for safe maintenance; use with a torque wrench or breaker bar. Made in the U.S.A.

€65.96 €80.10

-€49.70

JIMS Transmission Sprocket Locknut Wrench — Black

Extra-long two-piece wrench designed to remove the hex nut at the end of the main drive gear. Inner collar retains wrench to nut for safer work.

€231.93 €281.63

-€7.12

JIMS Shifter Fork Shaft Removal Tool — Black, Chrome

Loosens and removes both shifter shafts from the transmission door for easy disassembly. Made in the USA.

€33.22 €40.34

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS