TOOLS

Crankshaft Bearing Tool — Right, Crankcase, Black

-€56.62

JIMS Crankshaft Bearing Tool — Right, Crankcase, Black

Removes and installs right crankcase bearings without damaging the case.

€264.21 €320.83

-€18.54

JIMS Evolution Cylinder Stud Assembly Tool — Engine

Captive ball-bearing assembly tool set 1" from top for precise stud installs; fits all Evolution Big Twin and XL models. Made in the U.S.A.

€86.53 €105.07

-€14.67
Out of Stock

JIMS Primary Locking Bar — Front engine sprocket, Black

Immobilizes the primary drive for clutch and primary-drive service. Allows torque-wrench tightening or breaker-bar loosening. Made in the U.S.A.

€68.47 €83.14

-€25.17
Out of Stock

JIMS Cruise Drive Vise Stand — Black, Blue

Aligns transmission gears and shafts for safe, damage-free installation; speeds and simplifies assembly.

€117.51 €142.68

-€7.24

JIMS Primary Cover Inspection Plug Tool — Black

Tool for removing and installing the primary inspection plug. Made in the USA.

€33.79 €41.03

-€11.20

JIMS Shifter Shaft Sleeve Tool — For 5-Speed Transmission, Black

Removes and installs shifter shaft sleeves, assemblies and drums. Made in the USA.

€52.24 €63.44

Main Drive Gear Bearing/Seal Installation Tool — Cruise Drive, 6-speed, Black

-€33.16

JIMS Main Drive Gear Bearing/Seal Installation Tool — Cruise Drive,...

Precision installer for main drive gear bearings and seal; prevents marring and seats components to correct depth using a one-ton press. Made in USA.

€154.75 €187.91

-€49.04

JIMS Transmission Door Puller — Blue

Removes transmission door with gears and shaft attached. Will not damage door bearings. Made in the USA.

€228.84 €277.88

-€341.43

JIMS Timken® Case Bearing Tool — Engine Case, Steel, Black, PN 959

Precision insert sleeve and complete installation hardware to restore case bearing fitment. Requires hand tools and a two-ton press. Timken bearing not included.

€1,593.32 €1,934.75

Removable Series E-Track Wheel Chock — 3-1/2" (88.9 mm) tire width, front mount, chrome

-€50.70

PINGEL Removable Series E-Track Wheel Chock — 3-1/2" (88.9 mm) tire...

Removable wheel chock that stabilizes the motorcycle front wheel for trailer transport; patented mounting bracket; tie-down fitting sold separately.

€236.61 €287.31

Balancer Shaft Removal Tool — Left side, engine case, Black

-€62.37

JIMS Balancer Shaft Removal Tool — Left side, engine case, Black

Removes front and rear counter‑balancer shaft bearing assemblies from the left engine case; fits 96" and 110" Beta® engines. Made in the U.S.A.

€291.06 €353.43

Removable Series E-Track Wheel Chock — 88.9 mm (3-1/2") tire width, front mount, Chrome

-€50.70

PINGEL Removable Series E-Track Wheel Chock — 88.9 mm (3-1/2") tire...

Removable wheel chock that slides along the track for flexible positioning and secure front-wheel stabilization. Tie-down fitting sold separately.

€236.61 €287.31

Bearing and Race Puller Tool — Pinion shaft, flywheel bearing race, Black

-€109.87
Out of Stock

JIMS Bearing and Race Puller Tool — Pinion shaft, flywheel bearing...

Precision tool for removing press-fit bearings and gears from motorcycle pinion and flywheel shafts. Multi-use and made in the U.S.A.

€427.30 €537.17

Removable Series E-Track Wheel Chock — 6-1/2" tire width, Front mount, Chrome

-€50.70
Out of Stock

PINGEL Removable Series E-Track Wheel Chock — 6-1/2" tire width,...

Flexible placement along the track for multiple bikes.

Stabilizes wheel for trailer transport.

Patented bracket; tie-down fittings sold separately.

€236.61 €287.31

Sealed Wheel Bearing Removal/Installation Kit — 3/4", 1", 25 mm

-€99.11

JIMS Sealed Wheel Bearing Removal/Installation Kit — 3/4", 1", 25 mm

Removes and installs 3/4" , 1" and 25 mm sealed wheel bearings, with or without ABS. Made in the USA.

€462.52 €561.63

Starter Jackshaft Seal Installer Tool — Jackshaft, Black

-€35.09

JIMS Starter Jackshaft Seal Installer Tool — Jackshaft, Black

Installs the starter jackshaft seal without distortion; fits the seal in the upper part of the inner primary of Big Twins. Made in the U.S.A.

€163.76 €198.85

-€50.70

PINGEL Removable Series E-Track Wheel Chock — 6-1/2" tire width, Chrome

Removable wheel chock stabilizes the motorcycle wheel and lets you reposition the chock and tie-downs along the track; tie-down fitting sold separately.

€236.61 €287.31

Harley Davidson Cruise Drive 6-Speed Main Drive Gear Remover Tool — Black

-€55.52

JIMS Harley Davidson Cruise Drive 6-Speed Main Drive Gear Remover...

Removes the main drive gear from the main bearing while in the transmission case without requiring an arbor press.

€259.12 €314.64

-€54.21

JIMS Inner Primary Bearing and Seal Remover/Installer Tool — Black kit

Safely removes and installs the inner primary bearing and seal without harming bearings. Made in the USA.

€253.05 €307.26

-€15.77

JIMS O² Sensor Tool — Socket, Silver

Removes and installs oxygen sensors on fuel-injected models. Withstands up to 125 ft.-lbs. Made in the USA.

€73.60 €89.37

Transmission Case Shifter Shaft Seal Installer — For 6-Speed Transmission, Blue

-€10.58
Out of Stock

JIMS Transmission Case Shifter Shaft Seal Installer — For 6-Speed...

Precision tool that aligns and installs shifter seals to the correct depth.

€49.39 €59.97

Bearing Adapter — Sprocket shaft fit for '06 Harley-Davidson Dyna Glide, '07-'17 Twin Cam

-€24.72

JIMS Bearing Adapter — Sprocket shaft fit for '06 Harley-Davidson...

Allows installation of a shaft bearing on '06 Harley-Davidson Dyna Glide and '07-'17 Twin Cam; fits sprocket shaft applications and works with compatible bearing tools.

€115.34 €140.06

Transmission Case Shifter Shaft Seal Installer — For 5-Speed Transmission, Blue

-€10.83

JIMS Transmission Case Shifter Shaft Seal Installer — For 5-Speed...

Makes installing shifter shaft seals precise and effortless. Aligns and centers the seal to the correct depth for reliable fitment. Made in the USA.

€50.58 €61.41

-€17.66

JIMS Shifter Shaft Sleeve Tool — 6-speed transmission, Black

Removes and installs shifter shaft sleeves, assemblies and drums; improves alignment and speeds installation. Made in the USA.

€82.42 €100.08

-€41.24
Out of Stock

JIMS Engine Rotator — flywheel assembly, Black

Rotates the flywheel and piston assembly for pushrod adjustments, engine builds, and clearance checks. Not for use with impact wrenches.

€160.35 €201.59

-€70.05
Out of Stock

JIMS 5 & 6-Speed Countershaft Bearing Remover/Installer Tool — Black

Removes and installs closed-end countershaft bearings on 5- and 6-speed transmissions without a press.

€326.94 €396.99

Replacement Sleeve for Timken® Case Bearing Tool — Steel, Silver, Kit

-€52.56

JIMS Replacement Sleeve for Timken® Case Bearing Tool — Steel,...

Several times stronger than stock aluminum case material; restores bearing support. Made in the USA.

€245.31 €297.87

Inner Primary Bearing and Seal Remover/Installer Tool — 967-4, Black

-€21.61

JIMS Inner Primary Bearing and Seal Remover/Installer Tool — 967-4,...

Removes and installs the inner primary bearing and seal that the transmission mainshaft passes through by pushing on the bearing's outer perimeter to protect new bearings. Made in the USA.

€100.85 €122.46

Inner Primary Bearing and Seal Remover/Installer Tool — 967-5, Black

-€7.69

JIMS Inner Primary Bearing and Seal Remover/Installer Tool — 967-5,...

Removes and installs inner primary bearings and seals by pushing on the bearing's outer perimeter to prevent damage to new bearings. Made in the USA.

€35.86 €43.55

5-Speed Main Case Seal Installer Tool — Blue

-€20.22

JIMS 5-Speed Main Case Seal Installer Tool — Blue

Ensures correct alignment and seal protection during installation.

Made in the USA.

€94.38 €114.60

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS