TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

-€3.19

SHOW CHROME Oil Filter Wrench — Thin, Silver

Removes the oil filter without removing fairing pieces; secure locking mechanism requires no adjustment; fits most 2-1/2" filters.

€13.30 €16.49

Removable Wheel Chock — 6-1/2" tire width, front mount, chrome

-€23.34

PINGEL Removable Wheel Chock — 6-1/2" tire width, front mount, chrome

Removable wheel chock stabilizes the front wheel for transport; mounting brackets stay attached while the chock is easily removed.

€90.76 €114.10

-€2.36

SHOW CHROME Tiedown Loop — 18" (45.5 cm), pair, red

18" looped nylon extension straps keep metal tie-down ends away from your bike. Sold in a two pack.

€3.00 €5.36

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

-€3.57

SHOW CHROME Filter Wrench — 64 mm (2-1/2"), oil filter, silver

12-sided addition for fast access to 17 mm and 12 mm drain plugs.

Includes drain plug wrench. Made in USA.

€13.84 €17.41

-€4.53

RACE TECH Rebound Piston Ring Compressor — WP fork fitment, gold

Compresses rebound piston ring for insertion into cartridge tube. Required for assembly of newer KTM forks.

€3.72 €8.25

-€15.61

PINGEL Cylinder Head Stand — Yellow, Pair

Secure two-support mounting for cylinder head work; made in the U.S.A.

€60.72 €76.33

-€49.32

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€191.83 €241.15

-€1.85

TECHNORESEARCH O2 Instal Block — TR200055

Compact sampling block for wideband O2 sensors with vent screw for pressure equalization.

€7.19 €9.04

-€38.54

PINGEL Wheel Chock for Corrugated Floors — 3.5" tire width, Chrome

Removable wheel chock designed for corrugated truck and van beds; includes mounting kit. Made in the U.S.A.

€149.90 €188.44

Removable Wheel Chock — 3-1/2" tire width, Chrome, front mount

-€24.05

PINGEL Removable Wheel Chock — 3-1/2" tire width, Chrome, front mount

Stabilizes the front wheel for trailer transport; brackets stay in place while the chock is removed via a T-bolt hold-down screw. Made in the USA. Additional mounting kits sold separately.

€93.56 €117.61

-€5.54

ANDREWS Gauge Pins — 0.105" (2.67 mm) outside diameter, silver

Pins for measuring cam drive gear outside diameters; covers measurement differences between '84–'99 models.

€21.52 €27.06

-€5.90

ANDREWS Gauge Pins — 0.108" outside diameter

Used to measure the outside diameter of cam drive gears. Made in the USA. Ideal for cam gear inspection.

€22.94 €28.84

Exhaust Spring Puller Tool — T-handle, Black

-€2.73

FMF Exhaust Spring Puller Tool — T-handle, Black

T-handle spring puller that lets mechanics remove exhaust springs quickly and safely.

€12.28 €15.01

-€383.31

TECHNORESEARCH Centurion Super Pro Plus — Black kit

Advanced electrical system diagnostic tool; not for use with Android-based systems. Optional red USB key (PN# 1020-2868) required for Direct Link.

€1,490.65 €1,873.96

-€172.34

TECHNORESEARCH Complete Oxygen Sensor Installation Kit — O2 sensor, Black, Clear

Fast, all‑in‑one bung kit for O2 sampling and tuning; includes insertion tool, drill bit, sampler blocks, tubing, 25 rivnuts, screws and copper washers.

€669.24 €841.58

-€14.96

TECHNORESEARCH Bung Refill Kit — Silver, Yellow, for 3807-0378

Includes 25 each of bungs, plugs and copper washers. For use with 3807-0378 only.

€58.07 €73.03

Handlebar Mount Tire Pressure Monitor System — fits 7/8", 1", 1-1/8" handlebars, gray

-€50.68

SHOW CHROME Handlebar Mount Tire Pressure Monitor System — fits 7/8", 1",...

Handlebar-mounted TPMS kit with universal valve-stem sensors, patented anti-theft rings, 20-minute battery-saver mode and G-force wake; mounts to round or face-mounted brake clamps.

€159.92 €210.60

-€20.91

BARNETT Clutch Spring Compression Tool — Black

Compresses diaphragm clutch springs for easy removal and reinstallation of retainer rings. Made in the USA.

€81.32 €102.23

-€11.50

BARNETT Clutch Spring Compression Tool — Black

Tool for removal and reinstallation of retainer rings on diaphragm clutches. Durable and compact for shop or home use. Made in the USA.

€44.69 €56.19

Removable Series E-Track Wheel Chock — 3-1/2" (88.9 mm) tire width, front mount, chrome

-€58.76

PINGEL Removable Series E-Track Wheel Chock — 3-1/2" (88.9 mm) tire...

Removable wheel chock that stabilizes the motorcycle front wheel for trailer transport; patented mounting bracket; tie-down fitting sold separately.

€228.55 €287.31

Removable Series E-Track Wheel Chock — 3-1/2" tire width, front mount, Chrome

-€58.76

PINGEL Removable Series E-Track Wheel Chock — 3-1/2" tire width,...

Portable wheel chock that slides along the Series E Track to stabilize the front wheel during transport; tie-down fitting sold separately.

€228.55 €287.31

Removable Series E-Track Wheel Chock — 6-1/2" tire width, Front mount, Chrome

-€58.76

PINGEL Removable Series E-Track Wheel Chock — 6-1/2" tire width,...

Flexible placement along the track for multiple bikes.

Stabilizes wheel for trailer transport.

Patented bracket; tie-down fittings sold separately.

€228.55 €287.31

-€58.76

PINGEL Removable Series E-Track Wheel Chock — 6-1/2" tire width, Chrome

Removable wheel chock stabilizes the motorcycle wheel and lets you reposition the chock and tie-downs along the track; tie-down fitting sold separately.

€228.55 €287.31

-€6.53

PINGEL Removable Tie-Down Fitting for E-Track — O-ring end

Quick-install removable tie-down fitting for Series E tracks; sold individually.

€25.42 €31.95

-€1.81

VERTEX Check Valve Retaining Plug Installation Tool — Brass

Use when installing check valve for a hassle-free, professional job.

€3.88 €5.69

Additional Mounting Plate Kit — Wheel chock mounting kit, center mount, silver

-€21.90

PINGEL Additional Mounting Plate Kit — Wheel chock mounting kit,...

Additional mounting plate with hardware for removable chocks; made for corrugated or textured floors; made in the U.S.A.

€85.18 €107.08

Threaded Cylinder Head Holder — 12 mm, 14 mm, Silver

-€14.52

PINGEL Threaded Cylinder Head Holder — 12 mm, 14 mm, Silver

Mounts in any bench vise and holds the cylinder head securely for all types of head work; shaft includes a drilled hole for wall storage; made in the U.S.A.

€56.44 €70.96

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS