TOOLS

-€2.29
Out of Stock

MOTION PRO Dual Drive Mini T-Handle Tool — 1/4" drive, 165.1 mm (6-1/2")

T-handle and shaft drive for tight access; works with sockets, hex drives and crow's foot adapters; compact and durable.

€6.49 €8.78

Ti Prolight™ Wrench Set — 8 mm, 10 mm, 12 mm, 14 mm, Silver

-€42.73
Out of Stock

MOTION PRO Ti Prolight™ Wrench Set — 8 mm, 10 mm, 12 mm, 14 mm, Silver

Extremely lightweight — less than one quarter the weight of a standard wrench. Exclusive optimized design with an ergonomic handle. Not intended for everyday shop use.

€120.75 €163.48

-€24.54
Out of Stock

MOTION PRO Wheel Bearing Remover Set — 8-piece, 10–25 mm, metric, black

Eight-piece bearing remover kit with large and small driver rods and removers for 10–25 mm bearings. Dependable split collet design and heat treated for longevity.

€69.38 €93.92

-€14.23
Out of Stock

COLONY Wheel Lug Wrench — Wheel hub, Black

Strong, handy tool for removing or replacing brake drum wheel socket screws. Reproduction of original factory wrench. Made in the U.S.A.

€55.33 €69.56

-€1.48
Out of Stock

MOTION PRO Combo Hex Bit — 3 mm, 4 mm, nickel pewter

Dual-purpose hex bit that fits Motion Pro® Deep Socket and T-Handle Wrench; rubber O-ring secures the bit.

€4.17 €5.65

-€8.56
Out of Stock

MOTION PRO Spinner II T-Handle Tool with Swivel Drive — 12" (30.5 cm),...

Bearing-mounted spinner for faster bolt and nut removal. Two-step drive head for swivel or fixed drive. Chrome-vanadium handle with padded grip.

€24.23 €32.79

Flywheel Puller Right Hand Internal Thread — M33 x 1.5, black oxide

-€11.83
Out of Stock

MOTION PRO Flywheel Puller Right Hand Internal Thread — M33 x 1.5, black...

Reliable right-hand flywheel puller for safe removal of flywheels and rotors. Heat treated, durable finish, lifetime limited warranty.

€33.42 €45.25

-€8.59
Out of Stock

MOTION PRO Spinner II T-Handle Tool with Swivel Drive — 12", 1/4", Blue

Bearing-mounted spinner for faster bolt and nut removal; two-step drive head for swivel or fixed drive; padded grip for comfort.

€24.26 €32.85

Flywheel Puller Right Hand Internal Thread — M24 x 1.5, right-hand thread, black oxide

-€7.39
Out of Stock

MOTION PRO Flywheel Puller Right Hand Internal Thread — M24 x 1.5,...

Precision flywheel puller with right-hand internal thread. Heat treated, durable protective finish, lifetime limited warranty.

€20.89 €28.28

-€22.19
Out of Stock

MOTION PRO Flywheel Puller Internal Thread — M50 x 1.5, Black oxide

Removes flywheel or rotor. Heat-treated for strength. Laser-etched identification. Includes crank protector. Right-hand thread. Durable corrosion-resistant finish. Lifetime limited warranty.

€62.68 €84.87

-€4.33
Out of Stock

SADDLEMEN Adventure Straps — 97 cm (38"), loop ends, 25.4 mm (1"), Black

Reliable cargo straps for bikes. Classic loop ends and quick-release center buckles make securing and removing loads fast. Packs away easily for convenient storage.

€12.17 €16.50

Valve Stem Seal Tool — 4 mm, Blue anodized

-€3.85
Out of Stock

MOTION PRO Valve Stem Seal Tool — 4 mm, Blue anodized

Contoured install tools that protect valve stem seals, hold four seals at once, and ensure straight, damage-free installation.

€10.85 €14.70

Tie-Down Clamp — 31.8 mm (1-1/4"), anodized

-€12.89
Out of Stock

PSR Tie-Down Clamp — 31.8 mm (1-1/4"), anodized

Instant anchor points with an oval opening for single or double hooks. Rubber insert protects fork surfaces.

€50.14 €63.03

Crankcase Splitter V2 — Aluminum and steel, black and blue anodized

-€52.83
Out of Stock

MOTION PRO Crankcase Splitter V2 — Aluminum and steel, black and blue...

Fast, easy-to-use crankcase splitter with 5 mm, 6 mm and 8 mm puller stud threads, captured retaining collars, grooved studs and molded storage tray.

€205.44 €258.27

-€13.22
Out of Stock

PSR Fork Tube Tie-Down — 60 mm (2.4 in) I.D., anodized

Patented clamp for tie-down anchoring on most MX upside-down forks; rubber insert protects fork; 60 mm I.D.; pair.

€51.39 €64.61

Tie-Down Clamp — 25.4 mm (1"), pair, anodized

-€14.16
Out of Stock

PSR Tie-Down Clamp — 25.4 mm (1"), pair, anodized

Instant anchor points for most powersport vehicles. Oval opening fits single or double hooks. Rubber insert protects fork surfaces.

€55.03 €69.19

Tie-Down Clamp — 38.1 mm (1-1/2 in), Anodized

-€14.16
Out of Stock

PSR Tie-Down Clamp — 38.1 mm (1-1/2 in), Anodized

Instant anchor points for tie-downs on most powersport vehicles. Oval opening for single or double hooks; rubber insert protects fork surfaces.

€55.03 €69.19

Clutch Adjuster Nut Tool — 11/16" clutch adjuster lock nut, fits '98 and later Big Twin Harley-Davidson models, black

-€4.38
Out of Stock

MOTION PRO Clutch Adjuster Nut Tool — 11/16" clutch adjuster lock nut,...

Through-hole design holds the clutch adjuster screw while tightening the 11/16" lock nut; deep socket fits into the clutch basket; compact for saddlebags. Not for hydraulic clutches.