TOOLS

-€13.22
Out of Stock

PSR Fork Tube Tie-Down — 60 mm (2.4 in) I.D., anodized

Patented clamp for tie-down anchoring on most MX upside-down forks; rubber insert protects fork; 60 mm I.D.; pair.

€51.39 €64.61

Tie-Down Clamp — 25.4 mm (1"), pair, anodized

-€14.16

PSR Tie-Down Clamp — 25.4 mm (1"), pair, anodized

Instant anchor points for most powersport vehicles. Oval opening fits single or double hooks. Rubber insert protects fork surfaces.

€55.03 €69.19

Tie-Down Clamp — 38.1 mm (1-1/2 in), Anodized

-€14.16

PSR Tie-Down Clamp — 38.1 mm (1-1/2 in), Anodized

Instant anchor points for tie-downs on most powersport vehicles. Oval opening for single or double hooks; rubber insert protects fork surfaces.

€55.03 €69.19

Replacement Pin for Mario™ Single-Sided Stand — 21.7 mm (0.85"), bronze, fits Ducati (except 1098)

-€9.08
Out of Stock

PSR Replacement Pin for Mario™ Single-Sided Stand — 21.7 mm...

Replacement pin for single-sided rear stands. Sold individually. Verify fitment before purchase.

€35.33 €44.41

Big Mike Triple Tree Stand Pins — 19 mm (0.75") pin diameter, front

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 19 mm (0.75") pin diameter,...

Model-specific triple tree pins; order by steering stem hole size. Intended for use with front stands.

€13.53 €17.02

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 13 mm, front, zinc

Model-specific triple tree pins ordered by steering stem hole size; fit compatible lifting stands for front-end maintenance.

€13.53 €17.02

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 16.75 mm pin, Front, Zinc

Pins for use with front stands. Order by steering stem hole size. Model-specific fit for triple tree setups.

€13.53 €17.02

Big Mike Triple Tree Stand Pins — 15.7 mm pin diameter, front mount

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 15.7 mm pin diameter, front...

Model-specific triple tree stand pins ordered to match steering stem hole size for use with front stands.

€13.53 €17.02

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 19 mm (0.75"), front, zinc

Model-specific triple tree pins for use with compatible lifting stands. Order by steering stem hole size.

€13.53 €17.02

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 22 mm (0.87"), Front, Zinc

Model-specific triple tree pins for use with front stands. Order by steering stem hole size.

€13.53 €17.02

-€14.23
Out of Stock

PSR Econo Front Stand — Universal, White, powder-coated

Universal front stand for conventional forks with sturdy mild-steel construction for dependable support.

€55.33 €69.56

-€5.33

PSR Optional Non-Spool Hardware — Black finish

Optional hardware for supporting motorcycles during maintenance; works without spools.

€20.73 €26.06

-€11.69

EPI Clutch Puller — Textron, Brass

Precision-machined puller for accurate clutch removal; individually packaged with instructions.

€45.44 €57.13

-€4.30
Out of Stock

EPI Clutch Tool — P-Drive, Brass

Service tool for removing PDrive™ rollers, torque rollers, and ramp or pivot assemblies; replacement for Ski-Doo axle tool.

€16.73 €21.03

-€29.77

EPI Clutch Splitter Tool — Brass

Separates inner and outer drive sheaves after removing the primary drive to speed service and minimize damage.

€115.75 €145.52

-€11.19

EPI Clutch Puller — Polaris, Brass

Precision-machined puller with heat-treated steel construction; individually packaged with instructions.

€43.50 €54.69

Triple Tree Converter — adapter, PSR® Econo Stand, white powder-coated

-€14.68
Out of Stock

PSR Triple Tree Converter — adapter, PSR® Econo Stand, white...

Essential tool for removing and servicing forks, removing the front wheel, or replacing front brake pads and rotors. Lifts the motorcycle from the lower triple clamp using a model-specific pin (pin not included). Converts an economy stand into a triple-tree lift stand. Easy to clean.

€57.06 €71.74

$Deluxe Fork Stand — front fork, 139.7 mm (5-1/2\"), Black$

-€22.72
Out of Stock

PSR Deluxe Fork Stand — front fork, 139.7 mm (5-1/2\"), Black

Tool-less adjusters; lifts from fork bottom for stable front-end support.

€88.39 €111.11

-€5.46
Out of Stock

PSR Non-Spool Hardware Kit — 5-1/2" tire, rear mount, black

Hardware kit with all necessary fasteners and mounting components for compatible wheel stands.

€21.25 €26.71

-€22.28
Out of Stock

PSR MX Lift Stand with Built In Damper — MX Shock, Black

Built-in damper for controlled lowering; light, durable construction; rubber-padded platform for secure contact.

€86.64 €108.92

Sprocket Socket — 27 mm, 32 mm, Front sprocket, Anodized Green

-€11.73
Out of Stock

PSR Sprocket Socket — 27 mm, 32 mm, Front sprocket, Anodized Green

A must-have for pro and home mechanics. Double shoulder design for Kawasaki front sprocket nuts that are almost impossible to loosen.

€45.61 €57.34

-€11.73
Out of Stock

PSR Sprocket Socket — 27 mm, 35 mm, Front, Anodized Green

A must-have for professional and home mechanics.

€45.61 €57.34

-€13.22
Out of Stock

PSR Wheel Bearing Puller Protector — Black

Guards wheels from bearing puller damage with CNC-machined Delrin for durable, low-friction protection.

€51.39 €64.61

-€9.25

EPI 35 mm EZ Bearing Greaser — Silver

Quickly pack Polaris 35 mm ID wheel bearings without full disassembly; compatible with bearing 3514634. CNC-machined greaser tool for fast maintenance.