TOOLS

-€2.29

MOTION PRO Dual Drive Mini T-Handle Tool — 1/4" drive, 165.1 mm (6-1/2")

T-handle and shaft drive for tight access; works with sockets, hex drives and crow's foot adapters; compact and durable.

€6.49 €8.78

Ti Prolight™ Wrench Set — 8 mm, 10 mm, 12 mm, 14 mm, Silver

-€42.73

MOTION PRO Ti Prolight™ Wrench Set — 8 mm, 10 mm, 12 mm, 14 mm, Silver

Extremely lightweight — less than one quarter the weight of a standard wrench. Exclusive optimized design with an ergonomic handle. Not intended for everyday shop use.

€120.75 €163.48

-€24.54

MOTION PRO Wheel Bearing Remover Set — 8-piece, 10–25 mm, metric, black

Eight-piece bearing remover kit with large and small driver rods and removers for 10–25 mm bearings. Dependable split collet design and heat treated for longevity.

€69.38 €93.92

Combo Hex Bit — 3 mm, 4 mm, Motion Pro® T-Handle Wrench, Motion Pro® Deep Socket

-€1.48

MOTION PRO Combo Hex Bit — 3 mm, 4 mm, Motion Pro® T-Handle Wrench,...

Dual-purpose hex bit with rubber o-ring to hold the bit securely in place.

€4.17 €5.65

-€8.56

MOTION PRO Spinner II T-Handle Tool with Swivel Drive — 12" (30.5 cm),...

Bearing-mounted spinner for faster bolt and nut removal. Two-step drive head for swivel or fixed drive. Chrome-vanadium handle with padded grip.

€24.23 €32.79

-€8.59

MOTION PRO Spinner II T-Handle Tool with Swivel Drive — 12", 1/4", Blue

Bearing-mounted spinner for faster bolt and nut removal; two-step drive head for swivel or fixed drive; padded grip for comfort.

€24.26 €32.85

-€22.19

MOTION PRO Flywheel Puller Internal Thread — M50 x 1.5, Black oxide

Removes flywheel or rotor. Heat-treated for strength. Laser-etched identification. Includes crank protector. Right-hand thread. Durable corrosion-resistant finish. Lifetime limited warranty.

€62.68 €84.87

-€3.85
Out of Stock

MOTION PRO Valve Seal Install Tools — 4 mm, Blue

Compact four-seal holder that aligns and protects valve stem seals for fast, damage-free installation.

€10.85 €14.70

Tie-Down Clamp — 31.8 mm (1-1/4"), anodized

-€12.89

PSR Tie-Down Clamp — 31.8 mm (1-1/4"), anodized

Instant anchor points with an oval opening for single or double hooks. Rubber insert protects fork surfaces.

€50.14 €63.03

-€13.22
Out of Stock

PSR Fork Tube Tie-Down — 60 mm (2.4 in) I.D., anodized

Patented clamp for tie-down anchoring on most MX upside-down forks; rubber insert protects fork; 60 mm I.D.; pair.

€51.39 €64.61

Tie-Down Clamp — 25.4 mm (1"), pair, anodized

-€14.16
Out of Stock

PSR Tie-Down Clamp — 25.4 mm (1"), pair, anodized

Instant anchor points for most powersport vehicles. Oval opening fits single or double hooks. Rubber insert protects fork surfaces.

€55.03 €69.19

Tie-Down Clamp — 38.1 mm (1-1/2 in), Anodized

-€14.16
Out of Stock

PSR Tie-Down Clamp — 38.1 mm (1-1/2 in), Anodized

Instant anchor points for tie-downs on most powersport vehicles. Oval opening for single or double hooks; rubber insert protects fork surfaces.

€55.03 €69.19

Clutch Adjuster Nut Tool — 11/16" clutch adjuster lock nut, fits '98 and later Big Twin Harley-Davidson models, black

-€4.38

MOTION PRO Clutch Adjuster Nut Tool — 11/16" clutch adjuster lock nut,...

Through-hole design holds the clutch adjuster screw while tightening the 11/16" lock nut; deep socket fits into the clutch basket; compact for saddlebags. Not for hydraulic clutches.

€12.40 €16.78

Replacement Pin for Mario™ Single-Sided Stand — 21.7 mm (0.85"), bronze, fits Ducati (except 1098)

-€9.08
Out of Stock

PSR Replacement Pin for Mario™ Single-Sided Stand — 21.7 mm...

Replacement pin for single-sided rear stands. Sold individually. Verify fitment before purchase.

€35.33 €44.41

Big Mike Triple Tree Stand Pins — 19 mm (0.75") pin diameter, front

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 19 mm (0.75") pin diameter,...

Model-specific triple tree pins; order by steering stem hole size. Intended for use with front stands.

€13.53 €17.02

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 13 mm, front, zinc

Model-specific triple tree pins ordered by steering stem hole size; fit compatible lifting stands for front-end maintenance.

€13.53 €17.02

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 16.75 mm pin, Front, Zinc

Pins for use with front stands. Order by steering stem hole size. Model-specific fit for triple tree setups.

€13.53 €17.02

Big Mike Triple Tree Stand Pins — 15.7 mm pin diameter, front mount

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 15.7 mm pin diameter, front...

Model-specific triple tree stand pins ordered to match steering stem hole size for use with front stands.

€13.53 €17.02

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 19 mm (0.75"), front, zinc

Model-specific triple tree pins for use with compatible lifting stands. Order by steering stem hole size.

€13.53 €17.02

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 22 mm (0.87"), Front, Zinc

Model-specific triple tree pins for use with front stands. Order by steering stem hole size.

€13.53 €17.02

-€14.23
Out of Stock

PSR Econo Front Stand — Universal, White, powder-coated

Universal front stand for conventional forks with sturdy mild-steel construction for dependable support.

€55.33 €69.56

-€5.17

MOTION PRO Tri Drive Mini T-Handle Kit — 6.4 mm (1/4"), 152.4 mm (6")

Compact T-handle kit for quick installation and removal of fasteners; includes 8, 10, 12, 13 mm sockets.

€14.64 €19.81

-€3.44

MOTION PRO Motospade™ — Blue

Compact two-ended cleaning tool with brush and pick plus a curved spade for removing mud and debris. Includes hanging hole for easy storage.

€9.74 €13.18

-€2.52

MOTION PRO Mini Spring Hook — Blue, Silver

For use on exhaust, seat and tank springs, cotter pins and side stand springs. Ergonomic handle and compact size for easy access.

€7.11 €9.63

-€1.18

MOTION PRO Replacement D-Shaped Bit — D-shaped, Silver, 08-0242

Replacement d-shaped bit with durable nickel pewter finish. Compatible with part #08-0229.

€3.33 €4.51

Triple Tree Converter — adapter, PSR® Econo Stand, white powder-coated

-€14.68
Out of Stock

PSR Triple Tree Converter — adapter, PSR® Econo Stand, white...

Essential tool for removing and servicing forks, removing the front wheel, or replacing front brake pads and rotors. Lifts the motorcycle from the lower triple clamp using a model-specific pin (pin not included). Converts an economy stand into a triple-tree lift stand. Easy to clean.

€57.06 €71.74

$Deluxe Fork Stand — front fork, 139.7 mm (5-1/2\"), Black$

-€22.72

PSR Deluxe Fork Stand — front fork, 139.7 mm (5-1/2\"), Black

Tool-less adjusters; lifts from fork bottom for stable front-end support.

€88.39 €111.11

-€5.46
Out of Stock

PSR Non-Spool Hardware Kit — Deluxe, Rear, 5-1/2" tire, Black

Complete hardware kit with fasteners, spacers and installation guide for compatible stands.

€21.25 €26.71

Spanner Nut Socket — 3/8" drive, Black oxide

-€15.38

MOTION PRO Spanner Nut Socket — 3/8" drive, Black oxide

Designed for reliable removal and installation of spanner (castle) lock nuts. Heat-treated for durability and backed by a lifetime limited warranty.

€43.45 €58.83

-€5.91
Out of Stock

MOTION PRO Replacement Fuel Injector Pigtail — For HYB Fuel Injector, Black

Replacement connector for fuel injectors. Connector only; wiring and adapters sold separately.

€16.70 €22.61

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS