TOOLS

Tie-Down Clamp — 31.8 mm (1-1/4"), anodized

-€12.89

PSR Tie-Down Clamp — 31.8 mm (1-1/4"), anodized

Instant anchor points with an oval opening for single or double hooks. Rubber insert protects fork surfaces.

€50.14 €63.03

-€5.15
Out of Stock

SW-MOTECH Legend Gear Shoulder Strap

The Legend Gear LA4 shoulder strap is designed to convert series bags into a comfortable shoulder bag with adjustable length and durable materials.

€20.06 €25.21

-€2.24
Out of Stock

SW-MOTECH Retention Straps for Drybag M/L — 4-pack, black

Replacement retention straps compatible with Drybag M and Drybag L. Pack includes four straps for straightforward swap-out.

€8.68 €10.92

-€13.22
Out of Stock

PSR Fork Tube Tie-Down — 60 mm (2.4 in) I.D., anodized

Patented clamp for tie-down anchoring on most MX upside-down forks; rubber insert protects fork; 60 mm I.D.; pair.

€51.39 €64.61

Tie-Down Clamp — 25.4 mm (1"), pair, anodized

-€14.16
Out of Stock

PSR Tie-Down Clamp — 25.4 mm (1"), pair, anodized

Instant anchor points for most powersport vehicles. Oval opening fits single or double hooks. Rubber insert protects fork surfaces.

€55.03 €69.19

Tie-Down Clamp — 38.1 mm (1-1/2 in), Anodized

-€14.16
Out of Stock

PSR Tie-Down Clamp — 38.1 mm (1-1/2 in), Anodized

Instant anchor points for tie-downs on most powersport vehicles. Oval opening for single or double hooks; rubber insert protects fork surfaces.

€55.03 €69.19

Replacement Pin for Mario™ Single-Sided Stand — 21.7 mm (0.85"), bronze, fits Ducati (except 1098)

-€9.08
Out of Stock

PSR Replacement Pin for Mario™ Single-Sided Stand — 21.7 mm...

Replacement pin for single-sided rear stands. Sold individually. Verify fitment before purchase.

€35.33 €44.41

Big Mike Triple Tree Stand Pins — 19 mm (0.75") pin diameter, front

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 19 mm (0.75") pin diameter,...

Model-specific triple tree pins; order by steering stem hole size. Intended for use with front stands.

€13.53 €17.02

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 13 mm, front, zinc

Model-specific triple tree pins ordered by steering stem hole size; fit compatible lifting stands for front-end maintenance.

€13.53 €17.02

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 16.75 mm pin, Front, Zinc

Pins for use with front stands. Order by steering stem hole size. Model-specific fit for triple tree setups.

€13.53 €17.02

Big Mike Triple Tree Stand Pins — 15.7 mm pin diameter, front mount

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 15.7 mm pin diameter, front...

Model-specific triple tree stand pins ordered to match steering stem hole size for use with front stands.

€13.53 €17.02

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 19 mm (0.75"), front, zinc

Model-specific triple tree pins for use with compatible lifting stands. Order by steering stem hole size.

€13.53 €17.02

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 22 mm (0.87"), Front, Zinc

Model-specific triple tree pins for use with front stands. Order by steering stem hole size.

€13.53 €17.02

-€14.23
Out of Stock

PSR Econo Front Stand — Universal, White, powder-coated

Universal front stand for conventional forks with sturdy mild-steel construction for dependable support.

€55.33 €69.56

-€11.69

EPI Clutch Puller — Textron, Brass

Precision-machined puller for accurate clutch removal; individually packaged with instructions.

€45.44 €57.13

-€4.30

EPI Clutch Tool — P-Drive, Brass

Service tool for removing PDrive™ rollers, torque rollers, and ramp or pivot assemblies; replacement for Ski-Doo axle tool.

€16.73 €21.03

-€11.84

EPI CVT Locking Tool — Black

Locks both clutches together for easy removal and torquing of retaining bolts during clutch service.

€46.01 €57.85

-€29.77

EPI Clutch Splitter Tool — Brass

Separates inner and outer drive sheaves after removing the primary drive to speed service and minimize damage.

€115.75 €145.52

-€5.95
Out of Stock

EPI Banding Tool — CV boots, Red

Ratchet-style tool for tightening large and small clamps to create a proper seal and keep out moisture and contaminants.

€23.10 €29.05

-€3.06

TECMATE CarbMate/VacuumMate™ Flexi-Rigid Manifold Adapter — M6, Black

Flexi-rigid manifold adapter for accessing and synchronizing hard-to-reach vacuum ports; bend the outer sheath and thread the inner tube.

€11.86 €14.92

Triple Tree Converter — adapter, PSR® Econo Stand, white powder-coated

-€14.68
Out of Stock

PSR Triple Tree Converter — adapter, PSR® Econo Stand, white...

Essential tool for removing and servicing forks, removing the front wheel, or replacing front brake pads and rotors. Lifts the motorcycle from the lower triple clamp using a model-specific pin (pin not included). Converts an economy stand into a triple-tree lift stand. Easy to clean.

€57.06 €71.74

$Deluxe Fork Stand — front fork, 139.7 mm (5-1/2\"), Black$

-€22.72

PSR Deluxe Fork Stand — front fork, 139.7 mm (5-1/2\"), Black

Tool-less adjusters; lifts from fork bottom for stable front-end support.

€88.39 €111.11

-€5.46
Out of Stock

PSR Non-Spool Hardware Kit — Deluxe, Rear, 5-1/2" tire, Black

Complete hardware kit with fasteners, spacers and installation guide for compatible stands.

€21.25 €26.71

-€8.89
Out of Stock

QUAD LOGIC Polaris Carburetor Choke Nut Tool — Silver, Carburetor

Choke nut wrench for removing and installing choke cable fittings on Mikuni 34–40 mm carburetors. Ideal for quick Polaris carburetor repairs.

€25.11 €34.00

-€11.55

QUAD LOGIC Fuel Pump Nut Wrench for Polaris — Silver

Helps remove stuck fuel pump retainer nuts on Polaris models; reduces time and avoids damage.

€32.64 €44.19

-€22.28
Out of Stock

PSR MX Lift Stand with Built In Damper — MX Shock, Black

Built-in damper for controlled lowering; light, durable construction; rubber-padded platform for secure contact.

€86.64 €108.92

Sprocket Socket — 27 mm, 32 mm, Front sprocket, Anodized Green

-€11.73

PSR Sprocket Socket — 27 mm, 32 mm, Front sprocket, Anodized Green

A must-have for pro and home mechanics. Double shoulder design for Kawasaki front sprocket nuts that are almost impossible to loosen.

€45.61 €57.34

-€11.73
Out of Stock

PSR Sprocket Socket — 27 mm, 35 mm, Front, Anodized Green

A must-have for professional and home mechanics.

€45.61 €57.34

Ball Joint Removal Tool for Strut Front Suspension — '90–'21 ATV/UTV fit, zinc

-€18.40

QUAD LOGIC Ball Joint Removal Tool for Strut Front Suspension — '90–'21...

Two-piece steel tool for removing and installing ball joints on strut-style front suspension. Works with standard shop presses; fits '90–'21 ATV/UTV models.

€52.01 €70.41

-€18.40
Out of Stock

QUAD LOGIC Ball Joint Removal Tool for A-Arm Front Suspension — Zinc

Two-piece steel tool for removing and installing ball joints with a standard shop press; heavy-duty construction; fits 2008-2020 A-arm front suspension ATVs/UTVs (except RZR/General 1000).

€52.01 €70.41

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS