TOOLS

-€9.63

MOOSE OFFROAD HARD-PARTS Sport Wheel Chock — 13 cm (5"), front mount, Black

Secures the front wheel during transport. Mounts permanently to the bed of a truck, van or trailer; hardware included.

€27.22 €36.85

-€9.63

MOOSE OFFROAD HARD-PARTS Wheel Chock — 16.5 cm (6-1/2") width, front mount

Mounts to truck, van or trailer bed. Includes mounting hardware. Holds the front wheel securely during transport.

€27.22 €36.85

-€6.41

MOOSE OFFROAD HARD-PARTS Tire Wedge Wheel Guide — Front, Black

Holds the front tire from sliding left or right during transport; clamps to the truck bed and installs in seconds. Fits tires up to 6" wide. Made in the U.S.A.

€18.14 €24.55

$Heavy-Duty Tie-Downs — 183 cm (72\"), 612 kg (1350 lb), Blue$

-€13.31

MOOSE OFFROAD FOUR WHEEL Heavy-Duty Tie-Downs — 183 cm (72\"), 612 kg (1350 lb), Blue

Pair of heavy-duty tie-downs with oversized rubber-coated hooks and long straps printed with the Moose Utility Division logo. Made in the U.S.A.

€37.64 €50.95

-€9.92
Out of Stock

MOOSE OFFROAD HARD-PARTS Carabiner Tie-Downs — 213 cm, 612 kg (1,350 lb), red

High-strength carabiner tie-downs with 1" wide Moose Racing straps, built-in soft tie, extra length and high break strength. Made in the U.S.A.

€28.03 €37.95

-€8.50

KIBBLEWHITE Valve Guide Ball Hone — 4.0 mm

Durable ball hone designed to size C630 bronze and cast iron valve guides. Made in the U.S.A.

€33.06 €41.56

-€8.49

KIBBLEWHITE Valve Guide Ball Hone — 4.5 mm

Durable hone for sizing C630 bronze and cast iron guide materials. Made in the U.S.A.

€33.00 €41.49

-€8.71

KIBBLEWHITE Valve Guide Ball Hone — 5.5 mm, Black

Durable ball hone for sizing C630 bronze and cast iron valve guide materials. Made in the U.S.A.

€24.65 €33.36

Tie-Down Clamp — 31.8 mm (1-1/4"), anodized

-€12.89

PSR Tie-Down Clamp — 31.8 mm (1-1/4"), anodized

Instant anchor points with an oval opening for single or double hooks. Rubber insert protects fork surfaces.

€50.14 €63.03

Precision Reamer for Manganese Bronze Valve Guides — 7.9 mm (0.3110"), 181 mm (7.125"), Nickel

-€20.99

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 7.9 mm...

Reamer engineered for KPMI manganese bronze and cast iron valve guides. Not for C630 nickel aluminum bronze. Cutting diameters +/- .0002".

€59.41 €80.40

$Precision Reamer for Manganese Bronze Valve Guides — 8.6 mm (0.3370\"), 181 mm (7.125\")$

-€31.85

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 8.6 mm...

Precision reamer engineered for KPMI manganese bronze and cast iron valve guides. Not for C630 nickel aluminum bronze. Cutting diameters +/- .0002".

€90.09 €121.94

$Precision Reamer for Manganese Bronze Valve Guides — 9.6 mm (0.3780\"), 181 mm (7.125\")$

-€25.75

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 9.6 mm...

Precision reamer for KPMI manganese bronze and cast iron valve guides. Not for C630 nickel aluminum bronze. Cutting diameters ± .0002".

€72.84 €98.59

$Precision Reamer for Manganese Bronze Valve Guides — 7.8 mm (0.31\"), 181 mm (7.125\"), Nickel$

-€27.10

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 7.8 mm...

Precision reamer engineered for KPMI manganese bronze and cast iron valve guides. Not for C630 nickel-aluminum bronze. Cutting diameters ±0.0002"

€76.72 €103.82

Precision Reamer for Manganese Bronze Valve Guides — 7 mm, 181 mm, Nickel

-€19.09

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 7 mm, 181...

Precision reamer for manganese bronze and cast iron valve guides. Not advisable to use a reamer on bronze after it has been used on cast iron. Do not use on C630 nickel aluminum bronze. Cutting diameters +/- .0002".

€54.03 €73.12

-€5.15
Out of Stock

SW-MOTECH Legend Gear Shoulder Strap

The Legend Gear LA4 shoulder strap is designed to convert series bags into a comfortable shoulder bag with adjustable length and durable materials.

€20.06 €25.21

-€4.27

MOOSE OFFROAD HARD-PARTS Master Link Pliers — Red, Master Link Installer

Specially formed pliers for fast master link installation and removal; saves time on chain work.

€12.08 €16.35

-€2.24
Out of Stock

SW-MOTECH Retention Straps for Drybag M/L — 4-pack, black

Replacement retention straps compatible with Drybag M and Drybag L. Pack includes four straps for straightforward swap-out.

€8.68 €10.92

-€9.10

MOOSE OFFROAD HARD-PARTS Top Dead Center Tool — Engine Case, Silver

Determines true top dead center for valve and timing work; uses O-rings to prevent shaft loss; threads into 14 mm spark plug threads.

€25.70 €34.80

Valve Guide Seal Installation Tools — Valve guide, 6061 T6 aluminum, set

-€10.19

KIBBLEWHITE Valve Guide Seal Installation Tools — Valve guide, 6061 T6...

Two-piece seal installer that centers valve seals for accurate, repeatable seating while minimizing burr formation.

€34.57 €44.76

Replacement Valve Guide Seal Installation Tool — Valve Guide, Red anodized

-€2.54

KIBBLEWHITE Replacement Valve Guide Seal Installation Tool — Valve Guide,...

Precision tool for workshop use; delivers repeatable alignment and seating for small mechanical components.

€7.10 €9.64

-€13.22
Out of Stock

PSR Fork Tube Tie-Down — 60 mm (2.4 in) I.D., anodized

Patented clamp for tie-down anchoring on most MX upside-down forks; rubber insert protects fork; 60 mm I.D.; pair.

€51.39 €64.61

Replacement Valve Guide Seal Installation Tool — Blue anodized, 6061 T6 aluminum

-€2.54

KIBBLEWHITE Replacement Valve Guide Seal Installation Tool — Blue...

Replacement seal installers for guide seal installation tool sets — easy, consistent seating and simplified service workflow.

€7.10 €9.64

Tow Strap — 2 in x 20 ft, 8,000 lb break strength, Yellow

-€8.82

MOOSE OFFROAD HARD-PARTS Tow Strap — 2 in x 20 ft, 8,000 lb break strength, Yellow

Heavy-duty synthetic tow strap with 2"-wide webbing, 8,000 lb break strength and 2,667 lb safe work load.

€24.95 €33.77

-€2.54

KIBBLEWHITE Replacement Valve Guide Seal Installation Tool — Silver anodized

Replacement seal installer for valve guide seal installation sets. Provides precise positioning, reduces rework, and is compact for shop use.

€7.10 €9.64

Wheel Net Tie Downs — 2" webbing, 1513 kg (3335 lb) capacity

-€33.47

MOOSE OFFROAD FOUR WHEEL Wheel Net Tie Downs — 2" webbing, 1513 kg (3335 lb) capacity

Secure UTV wheels with a net-style tie down that prevents shifting and lets suspension absorb road impact.

€94.60 €128.07

Tie-Down Clamp — 25.4 mm (1"), pair, anodized

-€14.16
Out of Stock

PSR Tie-Down Clamp — 25.4 mm (1"), pair, anodized

Instant anchor points for most powersport vehicles. Oval opening fits single or double hooks. Rubber insert protects fork surfaces.

€55.03 €69.19

Tie-Down Clamp — 38.1 mm (1-1/2 in), Anodized

-€14.16
Out of Stock

PSR Tie-Down Clamp — 38.1 mm (1-1/2 in), Anodized

Instant anchor points for tie-downs on most powersport vehicles. Oval opening for single or double hooks; rubber insert protects fork surfaces.

€55.03 €69.19

Tie-Downs with Swivel Hook — 38.1 mm (1-1/2"), carabiner clip, black

-€11.78

MOOSE OFFROAD HARD-PARTS Tie-Downs with Swivel Hook — 38.1 mm (1-1/2"), carabiner clip,...

Durable tie-downs with a swivel hook to prevent twisted straps; made in the U.S.A.

€33.27 €45.05

-€11.78

MOOSE OFFROAD HARD-PARTS Tie-Downs with Swivel Hook — 38.1 mm (1-1/2"), Red

Oversized rubber-coated hook and swivel carabiner prevent twisted straps. Made in the United States.

€33.27 €45.05

Tie-Downs with Swivel Hook — 38.1 mm (1-1/2") width, carabiner clip, Blue

-€11.78

MOOSE OFFROAD HARD-PARTS Tie-Downs with Swivel Hook — 38.1 mm (1-1/2") width, carabiner...

Oversized rubber-coated hook and swivel carabiner eliminate twisted straps and protect finishes. Durable construction for reliable cargo control.

€33.27 €45.05

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS