T-handle and shaft drive for tight access; works with sockets, hex drives and crow's foot adapters; compact and durable.
+34 636 847 491 (10:00 - 13:30)
TOOLS

Subcategories
Active filters
MOTION PRO
Dual Drive Mini T-Handle Tool — 1/4" drive, 165.1 mm (6-1/2")
€6.49
Regular price
€8.78
MOTION PRO
Ti Prolight™ Wrench Set — 8 mm, 10 mm, 12 mm, 14 mm, Silver
Extremely lightweight — less than one quarter the weight of a standard wrench. Exclusive optimized design with an ergonomic handle. Not intended for everyday shop use.
€120.75
Regular price
€163.48
MOTION PRO
Wheel Bearing Remover Set — 8-piece, 10–25 mm, metric, black
Eight-piece bearing remover kit with large and small driver rods and removers for 10–25 mm bearings. Dependable split collet design and heat treated for longevity.
€69.38
Regular price
€93.92
MOTION PRO
Combo Hex Bit — 3 mm, 4 mm, nickel pewter
Dual-purpose hex bit that fits Motion Pro® Deep Socket and T-Handle Wrench; rubber O-ring secures the bit.
€4.17
Regular price
€5.65
MOTION PRO
Spinner II T-Handle Tool with Swivel Drive — 12" (30.5 cm),...
Bearing-mounted spinner for faster bolt and nut removal. Two-step drive head for swivel or fixed drive. Chrome-vanadium handle with padded grip.
€24.23
Regular price
€32.79
MOTION PRO
Spinner II T-Handle Tool with Swivel Drive — 12", 1/4", Blue
Bearing-mounted spinner for faster bolt and nut removal; two-step drive head for swivel or fixed drive; padded grip for comfort.
€24.26
Regular price
€32.85
MOTION PRO
Flywheel Puller Internal Thread — M50 x 1.5, Black oxide
Removes flywheel or rotor. Heat-treated for strength. Laser-etched identification. Includes crank protector. Right-hand thread. Durable corrosion-resistant finish. Lifetime limited warranty.
€62.68
Regular price
€84.87
SNO STUFF
Clutch Holder — P-85, P-90, Comet 100C–108EXP, Polaris, Arctic...
Durable holder with a PVC-coated handle and precision laser-cut design for secure, comfortable use.
€38.76
Regular price
€52.48
MOTION PRO
Valve Stem Seal Tool — 4 mm, Blue anodized
Contoured install tools that protect valve stem seals, hold four seals at once, and ensure straight, damage-free installation.
€10.85
Regular price
€14.70
SNO STUFF
Clutch Holder — Ski-Doo, TRA, yellow, zinc plated
PVC-coated handle prevents scratches and adds comfort. Precision laser-cut design for accurate, reliable engagement.
€35.44
Regular price
€47.99
SNO STUFF
Clutch Holder — Yamaha, YVXC, YPZ, YXR, Yellow, zinc-plated
PVC-coated handle prevents scratches and increases comfort; precision laser-cut design for secure clutch holding.
€34.33
Regular price
€46.47
SW-MOTECH
Legend Gear Shoulder Strap
The Legend Gear LA4 shoulder strap is designed to convert series bags into a comfortable shoulder bag with adjustable length and durable materials.
€20.06
Regular price
€25.21
SW-MOTECH
Retention Straps for Drybag M/L — 4-pack, black
Replacement retention straps compatible with Drybag M and Drybag L. Pack includes four straps for straightforward swap-out.
€8.68
Regular price
€10.92
SW-MOTECH
Strap Set Legend — 4 loop straps (80 cm), 2 mounting straps...
Four 80 cm loop straps and two 100 cm mounting straps for securing Legend Gear bags. Polyamide webbing with anodized aluminum buckles.
€5.34
Regular price
€6.72
MOTION PRO
Crankcase Splitter V2 — Aluminum and steel, black and blue...
Fast, easy-to-use crankcase splitter with 5 mm, 6 mm and 8 mm puller stud threads, captured retaining collars, grooved studs and molded storage tray.
€205.44
Regular price
€258.27
MOTION PRO
Clutch Adjuster Nut Tool — 11/16" clutch adjuster lock nut,...
Through-hole design holds the clutch adjuster screw while tightening the 11/16" lock nut; deep socket fits into the clutch basket; compact for saddlebags. Not for hydraulic clutches.
€12.40
Regular price
€16.78
SOLAS
Impeller Installation Tool — Fits SRB, SRX, SRZ, SX/SX-4...
Simplifies impeller installation. Match the tool application to the impeller series to ensure proper fit.
€13.18
Regular price
€17.31
MOTION PRO
Tri Drive Mini T-Handle Kit — 6.4 mm (1/4"), 152.4 mm (6")
Compact T-handle kit for quick installation and removal of fasteners; includes 8, 10, 12, 13 mm sockets.
€14.64
Regular price
€19.81
MOTION PRO
Mini Spring Hook — Blue, Silver
For use on exhaust, seat and tank springs, cotter pins and side stand springs. Ergonomic handle and compact size for easy access.
€7.11
Regular price
€9.63
MOTION PRO
Replacement D-Shaped Bit — D-shaped, Silver, 08-0242
Replacement d-shaped bit with durable nickel pewter finish. Compatible with part #08-0229.
€3.33
Regular price
€4.51
SNO STUFF
Deluxe Spring Tool Multi-Pack — Exhaust, Black, T-handle set
Five-piece set of exhaust spring hook tools in several lengths and hook styles for tight access and secure handling.
€42.36
Regular price
€57.35
MOTION PRO
Spanner Nut Socket — 3/8" drive, Black oxide
Designed for reliable removal and installation of spanner (castle) lock nuts. Heat-treated for durability and backed by a lifetime limited warranty.
€43.45
Regular price
€58.83
MOTION PRO
Replacement Fuel Injector Pigtail — For HYB Fuel Injector, Black
Replacement connector for fuel injectors. Connector only; wiring and adapters sold separately.
€16.70
Regular price
€22.61
MOTION PRO
Spanner Nut Socket — 1/2" drive, Swingarm, Black oxide
Tool for removing and installing spanner (castle) lock nuts. Laser-etched ID, heat-treated high-carbon construction, lifetime limited warranty.
€34.26
Regular price
€46.38
MOTION PRO
Replacement Fuel Injector Pigtail — For EV1 fuel injector,...
Connector lead for fuel injector cleaning systems. Connector only; wiring harness not included.
€16.70
Regular price
€22.61
MOTION PRO
Spanner Nut Socket — 1/2" drive, motor mount/swingarm, black...
Durable spanner nut socket for installing and removing castle lock nuts. Heat-treated high carbon steel with laser-etched ID. Lifetime limited warranty.
€45.97
Regular price
€62.23
MOTION PRO
Replacement Fuel Injector Pigtail — For HV2 fuel injector, Black
Replacement pigtail connector for use with fuel injector cleaners. Pigtail only; sold individually.
€16.70
Regular price
€22.61
MOTION PRO
JIS Cross-Head Hex-Drive Bits — #2, Black
Fits JIS cross-head screws to reduce cam-out and prevent screw-head damage; also works on Phillips screws.
€4.03
Regular price
€5.47
FUEL-TOOL
Fuel Pressure Gauge — Fits '01-'25 Harley-Davidson (except...
Magnetic fuel pressure gauge to check static and load readings. Includes storage pouch and O-ring lube. Head rotates 360°. Fits '01-'25 Harley-Davidson models (except V-Rod) with Delphi fuel injection.
€190.99
Regular price
€258.57
MOTION PRO
Ringer® Fork Seal Driver — 39 mm fork leg fitment, Blue &...
Knurled locking ring for a secure, no‑slip grip; innovative pinless design; black e-coat with laser‑engraved markings; perfectly weighted to install seals. Limited lifetime warranty.
€41.78
Regular price
€56.56