TOOLS

-€2.29
Out of Stock

MOTION PRO Dual Drive Mini T-Handle Tool — 1/4" drive, 165.1 mm (6-1/2")

T-handle and shaft drive for tight access; works with sockets, hex drives and crow's foot adapters; compact and durable.

€6.49 €8.78

Ti Prolight™ Wrench Set — 8 mm, 10 mm, 12 mm, 14 mm, Silver

-€42.73
Out of Stock

MOTION PRO Ti Prolight™ Wrench Set — 8 mm, 10 mm, 12 mm, 14 mm, Silver

Extremely lightweight — less than one quarter the weight of a standard wrench. Exclusive optimized design with an ergonomic handle. Not intended for everyday shop use.

€120.75 €163.48

-€24.54
Out of Stock

MOTION PRO Wheel Bearing Remover Set — 8-piece, 10–25 mm, metric, black

Eight-piece bearing remover kit with large and small driver rods and removers for 10–25 mm bearings. Dependable split collet design and heat treated for longevity.

€69.38 €93.92

-€1.48
Out of Stock

MOTION PRO Combo Hex Bit — 3 mm, 4 mm, nickel pewter

Dual-purpose hex bit that fits Motion Pro® Deep Socket and T-Handle Wrench; rubber O-ring secures the bit.

€4.17 €5.65

-€8.56
Out of Stock

MOTION PRO Spinner II T-Handle Tool with Swivel Drive — 12" (30.5 cm),...

Bearing-mounted spinner for faster bolt and nut removal. Two-step drive head for swivel or fixed drive. Chrome-vanadium handle with padded grip.

€24.23 €32.79

-€8.59
Out of Stock

MOTION PRO Spinner II T-Handle Tool with Swivel Drive — 12", 1/4", Blue

Bearing-mounted spinner for faster bolt and nut removal; two-step drive head for swivel or fixed drive; padded grip for comfort.

€24.26 €32.85

-€22.19
Out of Stock

MOTION PRO Flywheel Puller Internal Thread — M50 x 1.5, Black oxide

Removes flywheel or rotor. Heat-treated for strength. Laser-etched identification. Includes crank protector. Right-hand thread. Durable corrosion-resistant finish. Lifetime limited warranty.

€62.68 €84.87

-€9.05
Out of Stock

PEDRO'S Pro Chain Whip — Cassette removal, Black

Precision chain whip for secure removal and lockring work on multi-gear sprocket clusters.

€25.58 €34.63

Valve Stem Seal Tool — 4 mm, Blue anodized

-€3.85
Out of Stock

MOTION PRO Valve Stem Seal Tool — 4 mm, Blue anodized

Contoured install tools that protect valve stem seals, hold four seals at once, and ensure straight, damage-free installation.

€10.85 €14.70

-€30.56
Out of Stock

FEULING OIL PUMP CORP. Reamer for Camplate/Oil Pump Tool — Gold, Oil Pump

Lightly machines camplate relief valve seats and re-seats the plunger valve; use with pressure-test tools for Twin Cam and Milwaukee Eight engines.

€118.85 €149.41

-€5.15
Out of Stock

SW-MOTECH Legend Gear Shoulder Strap

The Legend Gear LA4 shoulder strap is designed to convert series bags into a comfortable shoulder bag with adjustable length and durable materials.

€20.06 €25.21

-€2.24
Out of Stock

SW-MOTECH Retention Straps for Drybag M/L — 4-pack, black

Replacement retention straps compatible with Drybag M and Drybag L. Pack includes four straps for straightforward swap-out.

€8.68 €10.92

Strap Set Legend — 4 loop straps (80 cm), 2 mounting straps (100 cm), Black

-€1.38
Out of Stock

SW-MOTECH Strap Set Legend — 4 loop straps (80 cm), 2 mounting straps...

Four 80 cm loop straps and two 100 cm mounting straps for securing Legend Gear bags. Polyamide webbing with anodized aluminum buckles.

€5.34 €6.72

Universal Replacement Dial Indicator — 9016, Black, Silver, Yellow

-€11.30
Out of Stock

FEULING OIL PUMP CORP. Universal Replacement Dial Indicator — 9016, Black, Silver,...

Universal replacement dial indicator. Fits Feuling tool part# 9015.

€44.06 €55.36

Crankcase Splitter V2 — Aluminum and steel, black and blue anodized

-€52.83
Out of Stock

MOTION PRO Crankcase Splitter V2 — Aluminum and steel, black and blue...

Fast, easy-to-use crankcase splitter with 5 mm, 6 mm and 8 mm puller stud threads, captured retaining collars, grooved studs and molded storage tray.

€205.44 €258.27

Clutch Adjuster Nut Tool — 11/16" clutch adjuster lock nut, fits '98 and later Big Twin Harley-Davidson models, black

-€4.38
Out of Stock

MOTION PRO Clutch Adjuster Nut Tool — 11/16" clutch adjuster lock nut,...

Through-hole design holds the clutch adjuster screw while tightening the 11/16" lock nut; deep socket fits into the clutch basket; compact for saddlebags. Not for hydraulic clutches.

€12.40 €16.78

-€31.65
Out of Stock

FEULING OIL PUMP CORP. Milwaukee Eight Engine Stand — Red, Feuling Parts

Fits softail and touring engine cases, mounts using factory front and two rear engine mount bolts, and includes three bench-mount holes.

€123.09 €154.74

-€96.05
Out of Stock

FEULING OIL PUMP CORP. M8 Oil Pump PSI Tester — Red

Adjustable spring tension to set relief valve pop-off; includes air regulator, 0–100 psi gauge, plugs, gasket and hardware. Fits '17-'24 M8; only for Feuling™ oil pumps. Made in the USA.

€373.53 €469.58

-€5.17
Out of Stock

MOTION PRO Tri Drive Mini T-Handle Kit — 6.4 mm (1/4"), 152.4 mm (6")

Compact T-handle kit for quick installation and removal of fasteners; includes 8, 10, 12, 13 mm sockets.

€14.64 €19.81

-€2.52
Out of Stock

MOTION PRO Mini Spring Hook — Blue, Silver

For use on exhaust, seat and tank springs, cotter pins and side stand springs. Ergonomic handle and compact size for easy access.

€7.11 €9.63

-€2.49
Out of Stock

FEULING OIL PUMP CORP. Replacement Camplate Tool Gasket — Part 9011, Gold

Replacement gasket for Camplate tool — direct-fit replacement for part #9010.

€9.68 €12.17

-€1.18
Out of Stock

MOTION PRO Replacement D-Shaped Bit — D-shaped, Silver, 08-0242

Replacement d-shaped bit with durable nickel pewter finish. Compatible with part #08-0229.

€3.33 €4.51

Spanner Nut Socket — 3/8" drive, Black oxide

-€15.38
Out of Stock

MOTION PRO Spanner Nut Socket — 3/8" drive, Black oxide

Designed for reliable removal and installation of spanner (castle) lock nuts. Heat-treated for durability and backed by a lifetime limited warranty.

€43.45 €58.83

-€5.91
Out of Stock

MOTION PRO Replacement Fuel Injector Pigtail — For HYB Fuel Injector, Black

Replacement connector for fuel injectors. Connector only; wiring and adapters sold separately.

€16.70 €22.61

-€12.12
Out of Stock

MOTION PRO Spanner Nut Socket — 1/2" drive, Swingarm, Black oxide

Tool for removing and installing spanner (castle) lock nuts. Laser-etched ID, heat-treated high-carbon construction, lifetime limited warranty.

€34.26 €46.38

Replacement Fuel Injector Pigtail — For EV1 fuel injector, Black, Gray

-€5.91
Out of Stock

MOTION PRO Replacement Fuel Injector Pigtail — For EV1 fuel injector,...

Connector lead for fuel injector cleaning systems. Connector only; wiring harness not included.

€16.70 €22.61

Spanner Nut Socket — 1/2" drive, motor mount/swingarm, black oxide

-€16.26
Out of Stock

MOTION PRO Spanner Nut Socket — 1/2" drive, motor mount/swingarm, black...

Durable spanner nut socket for installing and removing castle lock nuts. Heat-treated high carbon steel with laser-etched ID. Lifetime limited warranty.

€45.97 €62.23

-€5.91
Out of Stock

MOTION PRO Replacement Fuel Injector Pigtail — For HV2 fuel injector, Black

Replacement pigtail connector for use with fuel injector cleaners. Pigtail only; sold individually.

€16.70 €22.61

Replacement Air Regulator for Pressure Relief Testing Tool — 1/8" NPT fitting, 1/4" NPT inlet/outlet, Black

-€7.52
Out of Stock

FEULING OIL PUMP CORP. Replacement Air Regulator for Pressure Relief Testing Tool —...

Replacement regulator for Feuling pressure relief psi testing tool. 1/8" NPT fitting, 1/4" NPT inlet/outlet. Made in the USA.

€29.24 €36.76

-€1.44
Out of Stock

MOTION PRO JIS Cross-Head Hex-Drive Bits — #2, Black

Fits JIS cross-head screws to reduce cam-out and prevent screw-head damage; also works on Phillips screws.

€4.03 €5.47

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS