TOOLS

-€2.29

MOTION PRO Dual Drive Mini T-Handle Tool — 1/4" drive, 165.1 mm (6-1/2")

T-handle and shaft drive for tight access; works with sockets, hex drives and crow's foot adapters; compact and durable.

€6.49 €8.78

-€2.20

DRAG SPECIALTIES Cargo Net — 38 cm (15") x 38 cm (15"), plastic hooks, black

Elastic cargo net with 2.5" x 2.5" mesh; secures loads quickly and stores compactly.

€6.23 €8.43

Ti Prolight™ Wrench Set — 8 mm, 10 mm, 12 mm, 14 mm, Silver

-€42.73

MOTION PRO Ti Prolight™ Wrench Set — 8 mm, 10 mm, 12 mm, 14 mm, Silver

Extremely lightweight — less than one quarter the weight of a standard wrench. Exclusive optimized design with an ergonomic handle. Not intended for everyday shop use.

€120.75 €163.48

-€24.54

MOTION PRO Wheel Bearing Remover Set — 8-piece, 10–25 mm, metric, black

Eight-piece bearing remover kit with large and small driver rods and removers for 10–25 mm bearings. Dependable split collet design and heat treated for longevity.

€69.38 €93.92

Combo Hex Bit — 3 mm, 4 mm, Motion Pro® T-Handle Wrench, Motion Pro® Deep Socket

-€1.48

MOTION PRO Combo Hex Bit — 3 mm, 4 mm, Motion Pro® T-Handle Wrench,...

Dual-purpose hex bit with rubber o-ring to hold the bit securely in place.

€4.17 €5.65

-€8.56

MOTION PRO Spinner II T-Handle Tool with Swivel Drive — 12" (30.5 cm),...

Bearing-mounted spinner for faster bolt and nut removal. Two-step drive head for swivel or fixed drive. Chrome-vanadium handle with padded grip.

€24.23 €32.79

-€8.59

MOTION PRO Spinner II T-Handle Tool with Swivel Drive — 12", 1/4", Blue

Bearing-mounted spinner for faster bolt and nut removal; two-step drive head for swivel or fixed drive; padded grip for comfort.

€24.26 €32.85

-€22.19

MOTION PRO Flywheel Puller Internal Thread — M50 x 1.5, Black oxide

Removes flywheel or rotor. Heat-treated for strength. Laser-etched identification. Includes crank protector. Right-hand thread. Durable corrosion-resistant finish. Lifetime limited warranty.

€62.68 €84.87

-€9.02

DRAG SPECIALTIES Starter Jackshaft Wrench — 3802-0071, Silver

Slides over the jackshaft and holds it by the splines without damage; double-sided for easy removal of the jackshaft assembly.

€25.51 €34.53

1" Standard Tie-Downs — 72" length, 1" width, 4,500 lb tensile, Black

-€10.47

DRAG SPECIALTIES 1" Standard Tie-Downs — 72" length, 1" width, 4,500 lb...

Durable nylon tie-downs with industrial cam buckle and vinyl-coated hooks. Sold as a pair.

€29.53 €40.00

-€3.85
Out of Stock

MOTION PRO Valve Seal Install Tools — 4 mm, Blue

Compact four-seal holder that aligns and protects valve stem seals for fast, damage-free installation.

€10.85 €14.70

-€8.50

KIBBLEWHITE Valve Guide Ball Hone — 4.0 mm

Durable ball hone designed to size C630 bronze and cast iron valve guides. Made in the U.S.A.

€33.06 €41.56

-€8.49

KIBBLEWHITE Valve Guide Ball Hone — 4.5 mm

Durable hone for sizing C630 bronze and cast iron guide materials. Made in the U.S.A.

€33.00 €41.49

-€8.71

KIBBLEWHITE Valve Guide Ball Hone — 5.5 mm, Black

Durable ball hone for sizing C630 bronze and cast iron valve guide materials. Made in the U.S.A.

€24.65 €33.36

Precision Reamer for Manganese Bronze Valve Guides — 7.9 mm (0.3110"), 181 mm (7.125"), Nickel

-€20.99

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 7.9 mm...

Reamer engineered for KPMI manganese bronze and cast iron valve guides. Not for C630 nickel aluminum bronze. Cutting diameters +/- .0002".

€59.41 €80.40

$Precision Reamer for Manganese Bronze Valve Guides — 8.6 mm (0.3370\"), 181 mm (7.125\")$

-€31.85

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 8.6 mm...

Precision reamer engineered for KPMI manganese bronze and cast iron valve guides. Not for C630 nickel aluminum bronze. Cutting diameters +/- .0002".

€90.09 €121.94

$Precision Reamer for Manganese Bronze Valve Guides — 9.6 mm (0.3780\"), 181 mm (7.125\")$

-€25.75

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 9.6 mm...

Precision reamer for KPMI manganese bronze and cast iron valve guides. Not for C630 nickel aluminum bronze. Cutting diameters ± .0002".

€72.84 €98.59

$Precision Reamer for Manganese Bronze Valve Guides — 7.8 mm (0.31\"), 181 mm (7.125\"), Nickel$

-€27.10

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 7.8 mm...

Precision reamer engineered for KPMI manganese bronze and cast iron valve guides. Not for C630 nickel-aluminum bronze. Cutting diameters ±0.0002"

€76.72 €103.82

Precision Reamer for Manganese Bronze Valve Guides — 7 mm, 181 mm, Nickel

-€19.09

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 7 mm, 181...

Precision reamer for manganese bronze and cast iron valve guides. Not advisable to use a reamer on bronze after it has been used on cast iron. Do not use on C630 nickel aluminum bronze. Cutting diameters +/- .0002".

€54.03 €73.12

-€5.15
Out of Stock

SW-MOTECH Legend Gear Shoulder Strap

The Legend Gear LA4 shoulder strap is designed to convert series bags into a comfortable shoulder bag with adjustable length and durable materials.

€20.06 €25.21

-€2.24
Out of Stock

SW-MOTECH Retention Straps for Drybag M/L — 4-pack, black

Replacement retention straps compatible with Drybag M and Drybag L. Pack includes four straps for straightforward swap-out.

€8.68 €10.92

Valve Guide Seal Installation Tools — Valve guide, 6061 T6 aluminum, set

-€10.19

KIBBLEWHITE Valve Guide Seal Installation Tools — Valve guide, 6061 T6...

Two-piece seal installer that centers valve seals for accurate, repeatable seating while minimizing burr formation.

€34.57 €44.76

Replacement Valve Guide Seal Installation Tool — Valve Guide, Red anodized

-€2.54

KIBBLEWHITE Replacement Valve Guide Seal Installation Tool — Valve Guide,...

Precision tool for workshop use; delivers repeatable alignment and seating for small mechanical components.

€7.10 €9.64

Replacement Valve Guide Seal Installation Tool — Blue anodized, 6061 T6 aluminum

-€2.54

KIBBLEWHITE Replacement Valve Guide Seal Installation Tool — Blue...

Replacement seal installers for guide seal installation tool sets — easy, consistent seating and simplified service workflow.

€7.10 €9.64

-€2.54

KIBBLEWHITE Replacement Valve Guide Seal Installation Tool — Silver anodized

Replacement seal installer for valve guide seal installation sets. Provides precise positioning, reduces rework, and is compact for shop use.

€7.10 €9.64

Clutch Adjuster Nut Tool — 11/16" clutch adjuster lock nut, fits '98 and later Big Twin Harley-Davidson models, black

-€4.38

MOTION PRO Clutch Adjuster Nut Tool — 11/16" clutch adjuster lock nut,...

Through-hole design holds the clutch adjuster screw while tightening the 11/16" lock nut; deep socket fits into the clutch basket; compact for saddlebags. Not for hydraulic clutches.

€12.40 €16.78

Impeller Installation Tool — Fits SRB, SRX, SRZ, SX/SX-4 impellers

-€4.13

SOLAS Impeller Installation Tool — Fits SRB, SRX, SRZ, SX/SX-4...

Simplifies impeller installation. Match the tool application to the impeller series to ensure proper fit.

€13.18 €17.31

-€5.17

MOTION PRO Tri Drive Mini T-Handle Kit — 6.4 mm (1/4"), 152.4 mm (6")

Compact T-handle kit for quick installation and removal of fasteners; includes 8, 10, 12, 13 mm sockets.

€14.64 €19.81

-€3.44

MOTION PRO Motospade™ — Blue

Compact two-ended cleaning tool with brush and pick plus a curved spade for removing mud and debris. Includes hanging hole for easy storage.

€9.74 €13.18

-€2.52

MOTION PRO Mini Spring Hook — Blue, Silver

For use on exhaust, seat and tank springs, cotter pins and side stand springs. Ergonomic handle and compact size for easy access.

€7.11 €9.63

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS