TOOLS

Crankshaft Bearing Tool — Right, Crankcase, Black

-€65.63
Out of Stock

JIMS Crankshaft Bearing Tool — Right, Crankcase, Black

Removes and installs right crankcase bearings without damaging the case.

€255.20 €320.83

-€2.29

MOTION PRO Dual Drive Mini T-Handle Tool — 1/4" drive, 165.1 mm (6-1/2")

T-handle and shaft drive for tight access; works with sockets, hex drives and crow's foot adapters; compact and durable.

€6.49 €8.78

Ti Prolight™ Wrench Set — 8 mm, 10 mm, 12 mm, 14 mm, Silver

-€42.73

MOTION PRO Ti Prolight™ Wrench Set — 8 mm, 10 mm, 12 mm, 14 mm, Silver

Extremely lightweight — less than one quarter the weight of a standard wrench. Exclusive optimized design with an ergonomic handle. Not intended for everyday shop use.

€120.75 €163.48

-€24.54

MOTION PRO Wheel Bearing Remover Set — 8-piece, 10–25 mm, metric, black

Eight-piece bearing remover kit with large and small driver rods and removers for 10–25 mm bearings. Dependable split collet design and heat treated for longevity.

€69.38 €93.92

-€21.49

JIMS Evolution Cylinder Stud Assembly Tool — Engine

Captive ball-bearing assembly tool set 1" from top for precise stud installs; fits all Evolution Big Twin and XL models. Made in the U.S.A.

€83.58 €105.07

Combo Hex Bit — 3 mm, 4 mm, Motion Pro® T-Handle Wrench, Motion Pro® Deep Socket

-€1.48

MOTION PRO Combo Hex Bit — 3 mm, 4 mm, Motion Pro® T-Handle Wrench,...

Dual-purpose hex bit with rubber o-ring to hold the bit securely in place.

€4.17 €5.65

-€17.00
Out of Stock

JIMS Primary Locking Bar — Front engine sprocket, Black

Immobilizes the primary drive for clutch and primary-drive service. Allows torque-wrench tightening or breaker-bar loosening. Made in the U.S.A.

€66.14 €83.14

-€29.18
Out of Stock

JIMS Cruise Drive Vise Stand — Black, Blue

Aligns transmission gears and shafts for safe, damage-free installation; speeds and simplifies assembly.

€113.50 €142.68

Ramp Pro Loading Ramps — 90" L, 52" W, 1,500 lb capacity, Black

-€219.68

CALIBER Ramp Pro Loading Ramps — 90" L, 52" W, 1,500 lb capacity, Black

Versatile folding loading ramps with integrated 11.5” LowPro Grip Glides for safe entry/exit, removable center section, and included Retrax strap for secure attachment.

€620.84 €840.52

-€12.99

JIMS Shifter Shaft Sleeve Tool — For 5-Speed Transmission, Black

Removes and installs shifter shaft sleeves, assemblies and drums. Made in the USA.

€50.45 €63.44

$Ramp Pro Loading Ramps — 229 cm (90\") length, 1360 kg (3000 lb) capacity$

-€275.39

CALIBER Ramp Pro Loading Ramps — 229 cm (90\") length, 1360 kg (3000...

Heavy-duty folding ramps with LowPro Grip Glides and removable center section for compact storage.

€778.31 €1,053.70

-€8.56

MOTION PRO Spinner II T-Handle Tool with Swivel Drive — 12" (30.5 cm),...

Bearing-mounted spinner for faster bolt and nut removal. Two-step drive head for swivel or fixed drive. Chrome-vanadium handle with padded grip.

€24.23 €32.79

-€8.59

MOTION PRO Spinner II T-Handle Tool with Swivel Drive — 12", 1/4", Blue

Bearing-mounted spinner for faster bolt and nut removal; two-step drive head for swivel or fixed drive; padded grip for comfort.

€24.26 €32.85

Main Drive Gear Bearing/Seal Installation Tool — Cruise Drive, 6-speed, Black

-€38.43

JIMS Main Drive Gear Bearing/Seal Installation Tool — Cruise Drive,...

Precision installer for main drive gear bearings and seal; prevents marring and seats components to correct depth using a one-ton press. Made in USA.

€149.48 €187.91

-€56.85

JIMS Transmission Door Puller — Blue

Removes transmission door with gears and shaft attached. Will not damage door bearings. Made in the USA.

€221.03 €277.88

-€395.75

JIMS Timken® Case Bearing Tool — Engine Case, Steel, Black, PN 959

Precision insert sleeve and complete installation hardware to restore case bearing fitment. Requires hand tools and a two-ton press. Timken bearing not included.

€1,539.00 €1,934.75

-€57.61
Out of Stock

JIMS Transmission Sprocket Locknut Wrench — Black

Extra-long two-piece wrench designed to remove the hex nut at the end of the main drive gear. Inner collar retains wrench to nut for safer work.

€224.02 €281.63

Balancer Shaft Removal Tool — Left side, engine case, Black

-€72.29

JIMS Balancer Shaft Removal Tool — Left side, engine case, Black

Removes front and rear counter‑balancer shaft bearing assemblies from the left engine case; fits 96" and 110" Beta® engines. Made in the U.S.A.

€281.14 €353.43

Bearing and Race Puller Tool — Pinion shaft, flywheel bearing race, Black

-€109.87
Out of Stock

JIMS Bearing and Race Puller Tool — Pinion shaft, flywheel bearing...

Precision tool for removing press-fit bearings and gears from motorcycle pinion and flywheel shafts. Multi-use and made in the U.S.A.

€427.30 €537.17

Sealed Wheel Bearing Removal/Installation Kit — 3/4", 1", 25 mm

-€114.88
Out of Stock

JIMS Sealed Wheel Bearing Removal/Installation Kit — 3/4", 1", 25 mm

Removes and installs 3/4" , 1" and 25 mm sealed wheel bearings, with or without ABS. Made in the USA.

€446.75 €561.63

Starter Jackshaft Seal Installer Tool — Jackshaft, Black

-€40.67

JIMS Starter Jackshaft Seal Installer Tool — Jackshaft, Black

Installs the starter jackshaft seal without distortion; fits the seal in the upper part of the inner primary of Big Twins. Made in the U.S.A.

€158.18 €198.85

Harley Davidson Cruise Drive 6-Speed Main Drive Gear Remover Tool — Black

-€64.36

JIMS Harley Davidson Cruise Drive 6-Speed Main Drive Gear Remover...

Removes the main drive gear from the main bearing while in the transmission case without requiring an arbor press.

€250.28 €314.64

-€62.84

JIMS Inner Primary Bearing and Seal Remover/Installer Tool — Black kit

Safely removes and installs the inner primary bearing and seal without harming bearings. Made in the USA.

€244.42 €307.26

-€18.28

JIMS O² Sensor Tool — Socket, Silver

Removes and installs oxygen sensors on fuel-injected models. Withstands up to 125 ft.-lbs. Made in the USA.

€71.09 €89.37

Transmission Case Shifter Shaft Seal Installer — For 6-Speed Transmission, Blue

-€12.27

JIMS Transmission Case Shifter Shaft Seal Installer — For 6-Speed...

Precision tool that aligns and installs shifter seals to the correct depth.

€47.70 €59.97

Bearing Adapter — Sprocket shaft fit for '06 Harley-Davidson Dyna Glide, '07-'17 Twin Cam

-€28.65
Out of Stock

JIMS Bearing Adapter — Sprocket shaft fit for '06 Harley-Davidson...

Allows installation of a shaft bearing on '06 Harley-Davidson Dyna Glide and '07-'17 Twin Cam; fits sprocket shaft applications and works with compatible bearing tools.

€111.41 €140.06

Transmission Case Shifter Shaft Seal Installer — For 5-Speed Transmission, Blue

-€12.56

JIMS Transmission Case Shifter Shaft Seal Installer — For 5-Speed...

Makes installing shifter shaft seals precise and effortless. Aligns and centers the seal to the correct depth for reliable fitment. Made in the USA.

€48.85 €61.41

-€20.47

JIMS Shifter Shaft Sleeve Tool — 6-speed transmission, Black

Removes and installs shifter shaft sleeves, assemblies and drums; improves alignment and speeds installation. Made in the USA.

€79.61 €100.08

-€41.24
Out of Stock

JIMS Engine Rotator — flywheel assembly, Black

Rotates the flywheel and piston assembly for pushrod adjustments, engine builds, and clearance checks. Not for use with impact wrenches.

€160.35 €201.59

-€81.19
Out of Stock

JIMS 5 & 6-Speed Countershaft Bearing Remover/Installer Tool — Black

Removes and installs closed-end countershaft bearings on 5- and 6-speed transmissions without a press.

€315.80 €396.99

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS