TOOLS

-€2.29

MOTION PRO Dual Drive Mini T-Handle Tool — 1/4" drive, 165.1 mm (6-1/2")

T-handle and shaft drive for tight access; works with sockets, hex drives and crow's foot adapters; compact and durable.

€6.49 €8.78

Ti Prolight™ Wrench Set — 8 mm, 10 mm, 12 mm, 14 mm, Silver

-€42.73

MOTION PRO Ti Prolight™ Wrench Set — 8 mm, 10 mm, 12 mm, 14 mm, Silver

Extremely lightweight — less than one quarter the weight of a standard wrench. Exclusive optimized design with an ergonomic handle. Not intended for everyday shop use.

€120.75 €163.48

-€24.54

MOTION PRO Wheel Bearing Remover Set — 8-piece, 10–25 mm, metric, black

Eight-piece bearing remover kit with large and small driver rods and removers for 10–25 mm bearings. Dependable split collet design and heat treated for longevity.

€69.38 €93.92

Combo Hex Bit — 3 mm, 4 mm, Motion Pro® T-Handle Wrench, Motion Pro® Deep Socket

-€1.48

MOTION PRO Combo Hex Bit — 3 mm, 4 mm, Motion Pro® T-Handle Wrench,...

Dual-purpose hex bit with rubber o-ring to hold the bit securely in place.

€4.17 €5.65

Ramp Pro Loading Ramps — 90" L, 52" W, 1,500 lb capacity, Black

-€219.68

CALIBER Ramp Pro Loading Ramps — 90" L, 52" W, 1,500 lb capacity, Black

Versatile folding loading ramps with integrated 11.5” LowPro Grip Glides for safe entry/exit, removable center section, and included Retrax strap for secure attachment.

€620.84 €840.52

$Ramp Pro Loading Ramps — 229 cm (90\") length, 1360 kg (3000 lb) capacity$

-€275.39

CALIBER Ramp Pro Loading Ramps — 229 cm (90\") length, 1360 kg (3000...

Heavy-duty folding ramps with LowPro Grip Glides and removable center section for compact storage.

€778.31 €1,053.70

-€8.56

MOTION PRO Spinner II T-Handle Tool with Swivel Drive — 12" (30.5 cm),...

Bearing-mounted spinner for faster bolt and nut removal. Two-step drive head for swivel or fixed drive. Chrome-vanadium handle with padded grip.

€24.23 €32.79

-€8.59

MOTION PRO Spinner II T-Handle Tool with Swivel Drive — 12", 1/4", Blue

Bearing-mounted spinner for faster bolt and nut removal; two-step drive head for swivel or fixed drive; padded grip for comfort.

€24.26 €32.85

-€22.19

MOTION PRO Flywheel Puller Internal Thread — M50 x 1.5, Black oxide

Removes flywheel or rotor. Heat-treated for strength. Laser-etched identification. Includes crank protector. Right-hand thread. Durable corrosion-resistant finish. Lifetime limited warranty.

€62.68 €84.87

Clutch Holder — P-85, P-90, Comet 100C–108EXP, Polaris, Arctic Cat, Yellow

-€13.72
Out of Stock

SNO STUFF Clutch Holder — P-85, P-90, Comet 100C–108EXP, Polaris, Arctic...

Durable holder with a PVC-coated handle and precision laser-cut design for secure, comfortable use.

€38.76 €52.48

-€3.85
Out of Stock

MOTION PRO Valve Seal Install Tools — 4 mm, Blue

Compact four-seal holder that aligns and protects valve stem seals for fast, damage-free installation.

€10.85 €14.70

-€12.55

SNO STUFF Clutch Holder — Ski-Doo, TRA, yellow, zinc plated

PVC-coated handle prevents scratches and adds comfort. Precision laser-cut design for accurate, reliable engagement.

€35.44 €47.99

-€12.14
Out of Stock

SNO STUFF Clutch Holder — Yamaha, YVXC, YPZ, YXR, Yellow, zinc-plated

PVC-coated handle prevents scratches and increases comfort; precision laser-cut design for secure clutch holding.

€34.33 €46.47

-€30.56

FEULING OIL PUMP CORP. Reamer for Camplate/Oil Pump Tool — Gold, Oil Pump

Lightly machines camplate relief valve seats and re-seats the plunger valve; use with pressure-test tools for Twin Cam and Milwaukee Eight engines.

€118.85 €149.41

Universal Replacement Dial Indicator — 9016, Black, Silver, Yellow

-€11.30

FEULING OIL PUMP CORP. Universal Replacement Dial Indicator — 9016, Black, Silver,...

Universal replacement dial indicator. Fits Feuling tool part# 9015.

€44.06 €55.36

ORV Tie-Downs — 2" wide, 25–35" adjustable, 3,300 lb (1,497 kg) WLL, Red, 2-pack

-€33.71

CALIBER ORV Tie-Downs — 2" wide, 25–35" adjustable, 3,300 lb (1,497...

Two-way tension tie-downs secure tires while allowing suspension movement during transport. Durable polyester straps and a zippered storage bag included. Mounting hardware not included.

€95.24 €128.95

ORV Tie-Downs — 89 cm (35") length, 1497 kg (3300 lb) capacity, 2" (50.8 mm) width

-€60.66

CALIBER ORV Tie-Downs — 89 cm (35") length, 1497 kg (3300 lb)...

Securely transport offroad vehicles with a two-way tension system; includes zippered storage bag; mounting hardware sold separately.

€171.43 €232.09

Clutch Adjuster Nut Tool — 11/16" clutch adjuster lock nut, fits '98 and later Big Twin Harley-Davidson models, black

-€4.38

MOTION PRO Clutch Adjuster Nut Tool — 11/16" clutch adjuster lock nut,...

Through-hole design holds the clutch adjuster screw while tightening the 11/16" lock nut; deep socket fits into the clutch basket; compact for saddlebags. Not for hydraulic clutches.

€12.40 €16.78

-€31.65

FEULING OIL PUMP CORP. Milwaukee Eight Engine Stand — Red, Feuling Parts

Fits softail and touring engine cases, mounts using factory front and two rear engine mount bolts, and includes three bench-mount holes.

€123.09 €154.74

-€96.05

FEULING OIL PUMP CORP. M8 Oil Pump PSI Tester — Red

Adjustable spring tension to set relief valve pop-off; includes air regulator, 0–100 psi gauge, plugs, gasket and hardware. Fits '17-'24 M8; only for Feuling™ oil pumps. Made in the USA.

€373.53 €469.58

-€5.17

MOTION PRO Tri Drive Mini T-Handle Kit — 6.4 mm (1/4"), 152.4 mm (6")

Compact T-handle kit for quick installation and removal of fasteners; includes 8, 10, 12, 13 mm sockets.

€14.64 €19.81

-€3.44

MOTION PRO Motospade™ — Blue

Compact two-ended cleaning tool with brush and pick plus a curved spade for removing mud and debris. Includes hanging hole for easy storage.

€9.74 €13.18

-€3.06

TECMATE CarbMate/VacuumMate™ Flexi-Rigid Manifold Adapter — M6, Black

Flexi-rigid manifold adapter for accessing and synchronizing hard-to-reach vacuum ports; bend the outer sheath and thread the inner tube.

€11.86 €14.92

-€2.52

MOTION PRO Mini Spring Hook — Blue, Silver

For use on exhaust, seat and tank springs, cotter pins and side stand springs. Ergonomic handle and compact size for easy access.

€7.11 €9.63

-€2.49

FEULING OIL PUMP CORP. Replacement Camplate Tool Gasket — Part 9011, Gold

Replacement gasket for Camplate tool — direct-fit replacement for part #9010.

€9.68 €12.17

-€1.18

MOTION PRO Replacement D-Shaped Bit — D-shaped, Silver, 08-0242

Replacement d-shaped bit with durable nickel pewter finish. Compatible with part #08-0229.

€3.33 €4.51

-€53.44

FUEL-TOOL Fuel Pressure Check Gauge — Delphi fuel injection, Black

Compact gauge for quick, accurate fuel pressure checks on '01-'25 Harley Davidson Delphi fuel-injected models.

€151.05 €204.49

Spanner Nut Socket — 3/8" drive, Black oxide

-€15.38

MOTION PRO Spanner Nut Socket — 3/8" drive, Black oxide

Designed for reliable removal and installation of spanner (castle) lock nuts. Heat-treated for durability and backed by a lifetime limited warranty.

€43.45 €58.83

-€5.91
Out of Stock

MOTION PRO Replacement Fuel Injector Pigtail — For HYB Fuel Injector, Black

Replacement connector for fuel injectors. Connector only; wiring and adapters sold separately.

€16.70 €22.61

-€12.12

MOTION PRO Spanner Nut Socket — 1/2" drive, Swingarm, Black oxide

Tool for removing and installing spanner (castle) lock nuts. Laser-etched ID, heat-treated high-carbon construction, lifetime limited warranty.

€34.26 €46.38

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS