TOOLS

Bleeding Equipment — Vacuum Pump, Brake Line

-€11.37

TRW Bleeding Equipment — Vacuum Pump, Brake Line

For bleeding hydraulic brake and clutch systems. Requires a compressed air source for use.

€65.60 €76.97

Bleeder Nipple — Brake line adapter, MCE301, black

-€1.00

TRW Bleeder Nipple — Brake line adapter, MCE301, black

For bleeding hydraulic brake and clutch systems. Requires a compressed air source.

€9.99 €10.99

Flexi-Rigid Manifold Adapter — M5, Black

-€3.06

TECMATE Flexi-Rigid Manifold Adapter — M5, Black

Flexible guide adapter for synchronizing machines with hard-to-reach carburetor or fuel-injection vacuum ports; bend the sheath and turn the inner tube to thread the fitting.

€11.86 €14.92

-€35.09

TECMATE CarbMate — 2-Channel, 12V, Black

Electronic two‑channel synchronizer for carburetors and throttle bodies with a transverse 9‑LED display; accurate to 0.5 cmHg; zero‑adjust knob; powered by 12V battery.

€136.49 €171.58

-€154.42

TECMATE Synchronizer — Yellow

Fast, accurate tool for synchronizing up to four throttle valves; built-in tachometer and rechargeable 7.2 V NiMH battery.

€600.50 €754.92

-€4.53

RACE TECH Rebound Piston Ring Compressor — WP fork fitment, gold

Compresses rebound piston ring for insertion into cartridge tube. Required for assembly of newer KTM forks.

€3.72 €8.25

-€7.94

WOODY'S Spring Tool — 15" (38.1 cm), Silver

Provides better leverage to push, pull or twist springs into place. Looped handle for a comfortable grip. Made in the U.S.A.

€22.45 €30.39

Replacement Parts For Rk Chain Breaker/Press Fit Tool — Clip, Rivet, Black

-€4.36

RK Replacement Parts For Rk Chain Breaker/Press Fit Tool — Clip,...

Replacement tail piece (cut) for chain breaker/press-fit tools. Precision-cut for consistent alignment and reliable link assembly.

€5.68 €10.04

Replacement Parts For Rk Chain Breaker/Press Fit Tool — Tail Piece Press, Black, for clip/rivet

-€4.36

RK Replacement Parts For Rk Chain Breaker/Press Fit Tool — Tail...

Replacement component for chain breaker and press-fit tools; improves alignment and press operations.

€5.68 €10.04

-€4.54

RK Small Pressure Bolt — for clip and rivet, black

Replacement pressure component for chain breaker and press-fit tools that supplies controlled, consistent pressure for master link work.

€13.86 €18.40

-€2.47

RK Replacement Parts for RK Chain Breaker/Press Fit Tool — Clip,...

Replacement cut pin holder for chain breaker and press-fit tools; secures and guides pins for easy removal and installation.

€7.57 €10.04

Replacement Parts For Rk Chain Breaker/Press Fit Tool — for master link connectors clip and rivet, Steel

-€2.47

RK Replacement Parts For Rk Chain Breaker/Press Fit Tool — for...

Replacement parts for chain breaker and press-fit tools. Precision components to maintain alignment and extend tool life.

€7.57 €10.04

Chain Tool Kit — Black, Red, UCT2100(50)

-€23.66

RK Chain Tool Kit — Black, Red, UCT2100(50)

Complete chain tool kit for pressing, riveting, flaring, cutting and breaking 40 & 50 type chains. Includes pins, holder plates and pressure bolts. Not compatible with 530PRODR; 420/428 rivet requires additional parts.

€72.20 €95.86

Chain Tool Kit — Clip and Rivet fitment, Black

-€4.54

RK Chain Tool Kit — Clip and Rivet fitment, Black

Versatile chain tool kit that breaks 40 & 50 chains, press-fits O-ring sideplates to the correct depth, and rivets links. Includes cutting and riveting pins and holders. Cannot press-fit or rivet 530PRODR; 420/428 rivet adapters sold separately.

€13.86 €18.40

Chain Tool Kit — 500/520/525/530/532, clip & rivet, black

-€4.54

RK Chain Tool Kit — 500/520/525/530/532, clip & rivet, black

Precision chain tool kit that press-fits tight-tolerance O-ring sideplates, breaks 40 & 50 chains, and installs clip or rivet master links. Complete kit includes body, pressure bolts, cutting pin and holder, plate holder, tail pieces, and flare pin. Cannot press-fit 530PRODR; riveting 420/428 requires FP428JP & PH428.

€13.86 €18.40

Chain Tool Kit — 420, 428, 400 chain sizes, clip or rivet fitment

-€4.54

RK Chain Tool Kit — 420, 428, 400 chain sizes, clip or rivet fitment

Heavy‑duty chain tool kit for 40 & 50 chains. Press‑fits O‑ring sideplates, breaks chains, and flares rivet links. Complete set of bolts, pins and plates. Not compatible with 530PRODR. Some 420/428 rivet operations require FP428JP and an adapter (sold separately).

€13.86 €18.40

Weatherproof permanent battery lead, powersport — 10 A, Black, Red

-€3.96

TECMATE Weatherproof permanent battery lead, powersport — 10 A, Black,...

Permanent weatherproof battery lead for powersport vehicles; provides a secure, low-profile permanent connection.

€8.50 €12.46

Charging Cable Extender — 2.5 m, compatible with pre-2015 AccuMate and pre-2012 OptiMate

-€4.49

TECMATE Charging Cable Extender — 2.5 m, compatible with pre-2015...

2.5 m extension cable with SAE connectors to extend charger reach; compatible with pre-2015 AccuMate and pre-2012 OptiMate.

€9.64 €14.13

Charger Replacement Clips — 10 A, Alligator Clamp, Black, Red

-€3.96

TECMATE Charger Replacement Clips — 10 A, Alligator Clamp, Black, Red

Replacement battery clips with easy-grip handles and a TM plug; fits round, square and flat tab posts.

€8.50 €12.46

OptiMate TM72 Cig / DIN Plug — TECMATE, TM72, Electrical System

-€6.08

TECMATE OptiMate TM72 Cig / DIN Plug — TECMATE, TM72, Electrical System

Accessory plug lead for OptiMate/AccuMate chargers with white TM connectors. Fits car cigarette lighter and some motorcycle accessory sockets. Length 50 cm, 18 SWG copper cable. Wired for negative earth vehicles.

€13.05 €19.13

OptiMate Cable O-06 — 50 cm, AUTO to SAE, black

-€4.22

TECMATE OptiMate Cable O-06 — 50 cm, AUTO to SAE, black

Converts SAE to an Ø21 mm AUTO socket; internal locking slots, weatherproof cap, 50 cm length, flexible to -40 °C.

€9.07 €13.29

Replacement Backprobe Set — Ignitionmate, Ignitionmate Duo, Black, Red

-€1.57

TECMATE Replacement Backprobe Set — Ignitionmate, Ignitionmate Duo,...

Small and large scoop shapes for different-sized terminal pins. Replacement parts for IgnitionMate (PART# 3807-0187). Electrical test connector.

€3.39 €4.96

-€207.93

TECMATE BatteryMate 150-9 — 12 V, 1–10 A

Selectable load-tester, desulfator and charger that restores neglected starter batteries and supports MF commissioning charges.

€808.65 €1,016.58

OptiMate Pro 8 6V/12V Charger Station — 8-bank, 6V/12V, 1.2 A, EU plug

-€196.86

TECMATE OptiMate Pro 8 6V/12V Charger Station — 8-bank, 6V/12V, 1.2 A,...

Desulfates, recovers, charges, tests and maintains up to eight batteries independently; safe for standard, gel and AGM; includes clips and extension cables.

€765.56 €962.42

1/4" Eyelet Battery Connection Lead — 508 mm (20 in), 1/4 in eyelet (M6), 12V, 15A fuse

-€3.16

TECMATE 1/4" Eyelet Battery Connection Lead — 508 mm (20 in), 1/4 in...

Premium quick-connect battery lead with rubber-sealed SAE connector, flexible at very low temperatures, fused protection, 1/4" eyelets (M6), 5 A cable rating.

€6.80 €9.96

Charger Cable Adapter — 50 cm (20 in), 12V, black

-€6.08

TECMATE Charger Cable Adapter — 50 cm (20 in), 12V, black

Quickly charge batteries through DIN or auto socket. Inline 8 A fuse and vibration-proof locking clips for safe, reliable connections.

€13.05 €19.13

Charger Cable Extension — 183 cm (6'), 12V, 5A, SAE plug

-€3.43

TECMATE Charger Cable Extension — 183 cm (6'), 12V, 5A, SAE plug

SAE-to-SAE cable extender with industry-standard SAE 2-pin connectors for reliable charger connections.

€7.36 €10.79

Battery Clips O-04 — 12V, 10A, 508 mm, Black, Red

-€3.43

TECMATE Battery Clips O-04 — 12V, 10A, 508 mm, Black, Red

Easy-grip rubber handles; fits round, square and flat-tab posts; industry-standard 2-pin connector; low-temperature rated; in-line rubber seal for heavy-duty connector.

€7.36 €10.79

$Y-Splitter — 51 cm (20\"), 12 V$

-€5.29

TECMATE Y-Splitter — 51 cm (20\"), 12 V

Branches a permanent battery lead into two fused outputs for charging or powering accessories.

€11.34 €16.63

Charger Cable Adapter — 152 mm (6 in), SAE plug, 12 V

-€2.63

TECMATE Charger Cable Adapter — 152 mm (6 in), SAE plug, 12 V

Converts older charger battery cables to a modern connector for easy, reliable charging.

€5.66 €8.29

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS