TOOLS

-€29.35

S&S CYCLE Engine Stand — For Twin Cam A Motor, Blue

Professional-looking support that protects finishes and provides an economical way to hold an engine for workbench use, shipping, or display. Made in the U.S.A.

€114.36 €143.71

-€23.86

S&S CYCLE Engine Stand — For Twin Cam B Motor, Blue

Professional display-quality engine stand that protects against corrosion and minor abrasions. An economical solution for bench work, shipping, or display. Made in the U.S.A.

€92.77 €116.63

-€57.13

S&S CYCLE Transmission Drilling Fixture — Black

Locates holes for drilling and tapping of the transmission case during T-Series engine installation with oil line adapter kit 310-0435.

€222.17 €279.30

-€8.15

S&S CYCLE Tappet Block/Oil Pump Alignment Tool — Tappet, Oil system, Gray

Ensures tappet blocks track properly on the camshaft and aligns Twin Cam oil pump to the cam support plate; two tools required for Twin Cam engines.

€31.72 €39.87

Bleeding Equipment — Vacuum Pump, Brake Line

-€11.37

TRW Bleeding Equipment — Vacuum Pump, Brake Line

For bleeding hydraulic brake and clutch systems. Requires a compressed air source for use.

€65.60 €76.97

Bleeder Nipple — Brake line adapter, MCE301, black

-€1.00

TRW Bleeder Nipple — Brake line adapter, MCE301, black

For bleeding hydraulic brake and clutch systems. Requires a compressed air source.

€9.99 €10.99

-€23.86

S&S CYCLE Engine Stand — For M8 models, Blue

Professional, economical engine support for bench work, shipping, and display.

€92.77 €116.63

CVO Cam Phaser Tool — Spool Valve, Silver

-€12.51

S&S CYCLE CVO Cam Phaser Tool — Spool Valve, Silver

Secures the cam phaser assembly so you can remove the spool valve bolt and access the cam chest.

€48.61 €61.12

-€10.29

S&S CYCLE Exhaust Dealer Service Kit — Exhaust, Silver

Complete service kit containing tamper-proof screws and a proprietary tamper-proof screw bit for end cap replacement and routine maintenance.

€40.02 €50.31

Custom Tie-Down Brackets — Chrome, pair, fits FLHR

-€12.40

KURYAKYN Custom Tie-Down Brackets — Chrome, pair, fits FLHR

Stylish custom mounts bolt to the side of the front fork, providing a secure, accessible point to attach tie-downs; fits FLHR with detachable windshields.

€9.00 €21.40

-€14.28

S&S CYCLE Crankcase Oil Passage Drilling Jig — Crankcase oil passage, gray

Precision drilling jig for preparing oil passages; used to install S&S® oil pumps on early motor cases. Made in the U.S.A.

€55.52 €69.80

Exhaust Gasket Installation Tool — fits '84–'24 Harley-Davidson & S&S Cycle

-€6.12

S&S CYCLE Exhaust Gasket Installation Tool — fits '84–'24...

Installs exhaust gaskets evenly; integrates with a 3/8" drive socket extension and fits tapered and straight gaskets.

€23.86 €29.98

Tread Doctor Tire Cutting Tool — Black, Stainless Steel

-€15.90

HARDLINE Tread Doctor Tire Cutting Tool — Black, Stainless Steel

Refreshes front or rear tires with a heated carbide blade; plug-in operation and easily resharpens for long life.

€44.92 €60.82

-€3.05

HARDLINE Thread Doctor™ Sniper Tool — HARDLINE, TD-SNIPER, Tire, Brass

Precision cutting tool for tread repair. Fits Tread Doctor™ heating irons. Cuts 1/4" grooves with adjustable depth.

€11.90 €14.95

-€21.68

HARDLINE Tread Doc — HARDLINE Tread, Kit

Heated carbide cutting tool for knobby tires. Angled cutting head for thin slices, forged carbide blade for lasting sharpness. Includes on/off switch and holding stand; works on any motorcycle tire.

€61.30 €82.98

-€1.83

HARDLINE Tread Doc — Tire

Heated carbide cutting tool for knobby tires; angled head for thin slices to extend tire life. Includes holding stand and on/off switch.

€7.12 €8.95

-€5.45

S&S CYCLE Main Jet Tool — Silver, S&S CYCLE

Tool for changing main jets in super carburetors using #72 series jets. Made in the USA.

€21.19 €26.64

Inner Primary Bearing Race Installer — Clutch, Harley-Davidson®, Black

-€67.36

S&S CYCLE Inner Primary Bearing Race Installer — Clutch,...

Precision tool that reduces installation effort by 30% and seats inner primary bearing races. Made in the U.S.A.

€233.41 €300.77

-€59.25
Out of Stock

S&S CYCLE Compression Release Socket — Engine case, Silver

Service socket for compression release components. For use with compatible kits. Not for OEM heads. Made in the U.S.A.

€138.46 €197.71

Engine Stand — For Evo Big Twin, Blue, Powder-coated

-€28.02
Out of Stock

S&S CYCLE Engine Stand — For Evo Big Twin, Blue, Powder-coated

Professional display appearance; protects against corrosion and minor abrasions. Economical solution for bench work, shipping, or display. Made in the U.S.A.

€109.19 €137.21

Cable Guide/Tie-Down Bracket — Mounting hole for up to 3/8" (M10) screw

-€2.69
Out of Stock

KURYAKYN Cable Guide/Tie-Down Bracket — Mounting hole for up to 3/8"...

Provides anchor points for securing luggage and gear. Mounting hole accepts up to a 3/8" (M10) screw.

€10.45 €13.14

-€33.97
Out of Stock

S&S CYCLE Rocker Box Wrench Set — Rocker Box, Allen (Hex), Black

Four-wrench set for accessing rocker box screws on Big Twin and XL Evolution-style motors.

€132.15 €166.12

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS