TOOLS

Pinion Gear Locker Tool — pinion gear, Black

-€16.21

JIMS Pinion Gear Locker Tool — pinion gear, Black

Locks the gear while torquing the nut; aligns under the gear and screws into the case. Made in the U.S.A.

€63.02 €79.23

Scorpion Clutch Hub Puller — Orange, Anodized

-€43.53

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€48.11 €91.64

Tri-fold Adjustable Ramp — 76 in length, 52 in width

-€110.77

MOOSE OFFROAD FOUR WHEEL Tri-fold Adjustable Ramp — 76 in length, 52 in width

Adjustable tri-fold ramp, fits 42–52 in, 1,250-lb. distributed capacity, bar-style traction surface; includes E‑Z grip rubber truckrests and nylon straps. Do not ride ATV on ramp.

€139.18 €249.95

$Arched Aluminum Folding Ramp — 229 cm (90\") length, 270 kg (595 lb) load capacity$

-€37.56

MOOSE OFFROAD HARD-PARTS Arched Aluminum Folding Ramp — 229 cm (90\") length, 270 kg...

Durable, lightweight aluminum arched folding ramp with E-Z grip rubber rests and nylon safety straps. Weighs only 13 lb. Maximum load 600 lb. Do not ride motorcycle on ramp.

€63.39 €100.95

-€72.90

MOOSE OFFROAD HARD-PARTS 6 Foot Ramp — 6 ft, 300 lb capacity, 4-pack

Aircraft-aluminum straight ramp with dimpled traction holes, rubber-coated tongue and stop-pin. Sold to dealers in 4-packs. Do not ride a motorcycle on the ramp.

€206.05 €278.95

$Aluminum Straight Folding Ramp — 213 cm (84\") , 180 kg (396 lb)$

-€29.76

MOOSE OFFROAD HARD-PARTS Aluminum Straight Folding Ramp — 213 cm (84\") , 180 kg (396 lb)

Folding straight aluminum ramp with rubber-coated fingers; folds flat for storage. Max load: 400 lb. Do not ride motorcycle on ramp.

€50.19 €79.95

-€4.69

MOOSE OFFROAD FOUR WHEEL Ramp Straps — Black, Pair, 3910-0028

Replacement straps for folding ramps. Adjustable length and easy installation.

€13.26 €17.95

-€234.44

MOOSE OFFROAD FOUR WHEEL UTV Loading Ramp — 241 cm (95"), 45.5 cm (18"), Aluminum

Heavy-duty loading ramps with EZ-grip rubber rests and nylon straps. Do not ride UTV or ATV on the ramp.

€395.51 €629.95

Aluminum 9 Foot Straight Folding Ramp — 12 in W x 9 ft L, 500 lb capacity

-€45.98

MOOSE OFFROAD HARD-PARTS Aluminum 9 Foot Straight Folding Ramp — 12 in W x 9 ft L, 500...

Durable, lightweight aluminum ramp designed for loading off-road motorcycles. Weather-resistant with a sturdy frame and included tie-down. Not for riding on the ramp.

€129.97 €175.95

Sprocket Lock Tool — Crankshaft, camshaft, Black

-€23.73

JIMS Sprocket Lock Tool — Crankshaft, camshaft, Black

Locks camshafts and crankshaft sprockets for safe removal, replacement and torquing. Includes instructions. Made in the U.S.A.

€92.27 €116.00

-€84.43

JIMS Inner Cam Bearing Removal Tool — Kit, Black

Purpose-built tool for removing inner cam bearings without damaging the crankcase; includes instructions and retention design to prevent rollers from falling into the engine.

€328.33 €412.76

10-Piece Hex Wrench Set — 1.5–10 mm, set of 10, Blue, Silver

-€2.86

MOOSE OFFROAD HARD-PARTS 10-Piece Hex Wrench Set — 1.5–10 mm, set of 10, Blue, Silver

Metric 10-piece hex key set with sizes from 1.5 mm to 10 mm. Includes a plastic holder for neat storage; ideal for precision repairs and routine maintenance.

€8.09 €10.95

-€15.55

JIMS Replacement Wheel Bearing Expander Rod — Black

Replacement expander rod for sealed wheel bearing remover/installer kits. Made in the USA.

€32.45 €48.00

-€99.44

JIMS Case Splitter Tool — Crankcase, Black

Separates sealed engine case halves using a hand thread-in pushing screw; bolts to primary mounting holes. Made in the U.S.A.

€386.69 €486.13

-€27.02

JIMS Valve Spring Compressor — Valve Spring, Gray

Removes and replaces valves and new-style conical valve springs. Requires the dedicated valve spring compressor tool. Made in the U.S.A.

€105.09 €132.11

-€8.39

JIMS Primary Cover Inspection Plug Tool — Black

Tool for removing and installing the primary inspection plug. Made in the USA.

€32.64 €41.03

-€16.21

JIMS Pinion Gear Locker Tool — Pinion gear, Black

Locks the pinion gear for torquing the pinion nut. Easy to align and install.

€63.02 €79.23

Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer Tool — Black

-€110.03

JIMS Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer...

Holds the main drive gear square to its bearing bore and installs it without removing the transmission. Made in the USA.

€427.86 €537.89

Heavy Duty Straight-Folding Ramp — 203 cm (80"), 362 kg (800 lb), 28 cm (11"), Powder coated

-€25.86

MOOSE OFFROAD HARD-PARTS Heavy Duty Straight-Folding Ramp — 203 cm (80"), 362 kg (800...

Center-fold ramp with mesh surface, rubber-coated ramp fingers to reduce slipping, welded carrying handle, includes tie-down straps. Do not ride motorcycles or ATVs on the ramp.

€73.09 €98.95

Recovery/Traction Boards — 104 cm (41"), 30 cm (11.75"), 10,000 lb capacity, red

-€18.80

MOOSE OFFROAD HARD-PARTS Recovery/Traction Boards — 104 cm (41"), 30 cm (11.75"),...

Reinforced nylon recovery boards that flex under load and assist in freeing vehicles from mud, snow, and sand. Mounting hardware included.

€53.15 €71.95

Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing Installer Tool — Black

-€71.05

JIMS Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing...

Safely installs main transmission case bearings in Harley Davidson Cruise Drive 6-Speed units without removing the bearing; holds bearing square to bore; made in the USA.