TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

-€73.76

K&L SUPPLY Center Stand — 498 kg (1100 lb), 33.02 cm (13"), Gold, Zinc

Scissor jack for raising bikes and ATVs. Minimum height 3-1/2" (88.9 mm). Do not use air or impact guns.

€286.83 €360.59

Carburetor Cleaner Kit — Spiral wire, Black

-€5.65

K&L SUPPLY Carburetor Cleaner Kit — Spiral wire, Black

Fourteen-piece wire set with spiral knurling for cleaning common jets and carb body holes. Includes compact case for storage and transport.

€15.94 €21.59

3-in-1 Truing Stand — 11" between centers, rims up to 21", Silver

-€243.93

K&L SUPPLY 3-in-1 Truing Stand — 11" between centers, rims up to 21", Silver

Versatile 3-in-1 stand for truing, balancing and checking crank runout; fits cranks up to 11" between centers and rims to 21".

€948.60 €1,192.53

-€33.01

K&L SUPPLY Cam Chain Tensioner Holder — Cam, Black/Silver

Holds the cam chain tensioner during removal and installation. Tabs engage the tensioner slots; knob retracts the tensioner; includes a one-way bearing.

€93.28 €126.29

-€87.42

K&L SUPPLY Kwik-Loader Valve Keeper Tool Set — Valve assembly, Black/White

Two-tool set that speeds keeper removal and installation using a removal tool and a hand-operated installation tool for fast, reliable valve service.

€247.03 €334.45

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

-€63.71

K&L SUPPLY Dial Indicator Gauge — Black, SAE, Magnet

Precision dial indicator reads 1.0" in .001" increments; lockable zero; includes magnetic base with adjustable arm.

€180.06 €243.77

-€37.99

K&L SUPPLY Carburetor Service Stand — Black

Positions carburetors for easy access; holds openings 22 mm–41 mm; bench-mountable.

€107.38 €145.37

Deluxe Vacuum Gauge Set — 2" gauges, 0–76 cm/Hg

-€71.68

K&L SUPPLY Deluxe Vacuum Gauge Set — 2" gauges, 0–76 cm/Hg

Includes storage case, rubber hoses, 5 mm and 6 mm adapters; built-in restrictions prevent needle bounce; 2" gauges, 0–76 cm/Hg readings.

€278.76 €350.44

-€8.34

K&L SUPPLY Carburetor Sync Adapters — 170 mm, M5 x 0.8, Set of 2, Silver

Handy adapters that connect your synchronizer to carburetor vacuum ports for accurate tuning and improved idle.

€23.58 €31.92

-€11.28

K&L SUPPLY Carburetor Sync Adapters — M6 x 1.0 thread, 60 mm

Useful tool for syncing your carburetor to achieve accurate vacuum balancing and smoother running.

€31.89 €43.17

MC455 Fat Jack Center Jack — 498 kg (1100 lb), 16 in × 10 in, Gold

-€175.47

K&L SUPPLY MC455 Fat Jack Center Jack — 498 kg (1100 lb), 16 in × 10 in,...

Included self-adhesive rubber nonskid pad; wide nonskid deck for increased lifting stability; lifts front or rear of bikes on MC600-type lifts; compatible with MC464 Fat Jack dolly; do not use air/impact guns.

€495.91 €671.38

MC464 Fat Jack Dolly — 800 lb (362 kg), Gold

-€48.94

K&L SUPPLY MC464 Fat Jack Dolly — 800 lb (362 kg), Gold

Makes a Fat Jack lift mobile for easy, stable shop repositioning. Casters provide smooth movement. Fat Jack sold separately.

€190.33 €239.27

-€5.54

ANDREWS Gauge Pins — 0.105" (2.67 mm) outside diameter, silver

Pins for measuring cam drive gear outside diameters; covers measurement differences between '84–'99 models.

€21.52 €27.06

-€5.90

ANDREWS Gauge Pins — 0.108" outside diameter

Used to measure the outside diameter of cam drive gears. Made in the USA. Ideal for cam gear inspection.

€22.94 €28.84

-€7.88

NAMZ Delphi-Packard Weatherpack Terminal Removal Tool — Green

Universal tool for removing Delphi-Packard Weatherpack terminals; compatible with AMP Multilock and Delphi connectors. Removes pins and receptacles. Made in the USA.

€23.65 €31.53

-€20.11

NAMZ MX-150 Molex Terminal Removal Tool — Black

Precision tool for removing MX-150 Molex terminals. Designed exclusively for MX-150 connectors to minimize pin and housing damage.

€60.33 €80.44

-€19.34

NAMZ Mate-n-Lock Terminal Removal Tool - Female Terminals — Black

Tool for removing female terminals from AMP Mate-n-Lock connectors for quick connector service.

€58.05 €77.39

-€11.20

NAMZ Removal Tool — For male terminals only, Black

Plunger tool removes male terminals from Mate-n-Lock connectors — slide over the terminal and push the lever.

€33.59 €44.79

Universal Mini "U" Barrel Crimp Tool — Mini, "U" Barrel, Black, Red

-€25.20

NAMZ Universal Mini "U" Barrel Crimp Tool — Mini, "U" Barrel,...

Precision crimper for small 30–20 gauge terminals; ideal for late-model motorcycle wiring. Made in Japan.

€75.63 €100.83

-€13.48

NAMZ Universal "U" Barrel Terminal Crimp Tool — Black, Red

Crimps 20–14 gauge wire for AMP, Deutsch, Delphi and other stamped terminals; five-position crimper; made in the USA.

€40.47 €53.95

-€12.97

K&L SUPPLY Tire Tamer — Black, Yellow

One-handed tire bead lifter that makes tube, valve stem and rim lock installation quick and easy. Small and trail-ready; saves knuckles and time.

€36.66 €49.63

-€51.61

K&L SUPPLY 3-in-1 Tire Bead Starter — Black

Easy-to-use bead starter that helps seat stubborn tires quickly and safely.

€145.88 €197.49

-€9.65

K&L SUPPLY Tire Valve Stem Inserter — tubeless tires, silver

Simplifies valve stem installation for faster, more reliable seating and reduced downtime.

€27.30 €36.95

-€5.68

K&L SUPPLY Spoke Wheel Weight Hammer — Brass

Special hammer that reaches behind disc rotors for installing or removing spoke-type wheel weights.

€16.06 €21.74

-€20.91

BARNETT Clutch Spring Compression Tool — Black

Compresses diaphragm clutch springs for easy removal and reinstallation of retainer rings. Made in the USA.

€81.32 €102.23

-€11.50

BARNETT Clutch Spring Compression Tool — Black

Tool for removal and reinstallation of retainer rings on diaphragm clutches. Durable and compact for shop or home use. Made in the USA.

€44.69 €56.19

-€93.32
Out of Stock

K&L SUPPLY MC464 Shop Dolly — Height 38 cm (15"), Blue

Adjustable shop dolly — base width 13"–20", swiveling neoprene wheels for smooth positioning.

€362.92 €456.24

Cycle Dock — 120–160 mm tire width, front mount, zinc finish

-€84.37
Out of Stock

K&L SUPPLY Cycle Dock — 120–160 mm tire width, front mount, zinc finish

Single-wide rocker dock with cradle stop for easy one-person loading and unloading. Removable and heavy-duty; tie-downs recommended.

€328.09 €412.46

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS