TOOLS

Subcategories

Camplate Roll Pin Removal/Installation Tool — Red

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€42.98

Camplate Tool — PSI Relief Valve, Black, Red, Silver

FEULING OIL PUMP CORP. Camplate Tool

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€173.68

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€99.12

Pushrod Tube Holder — Pushrod Tube, Black

FEULING OIL PUMP CORP. Pushrod Tube Holder

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€14.65

M8 Oil Pump Roll Pin Remover/Installer Tool — Red

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€38.95

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€173.17

M8 Crankshaft Runout Measuring Tool — Red

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€99.12

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

FEULING OIL PUMP CORP. Valve Spring Seat Cutter

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€146.08

Pilot Seat Cutter for M8 — for 6 mm valves

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€68.72

Oil Pump Gear Alignment Tool — 9017, Black, Silver

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€35.02

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€228.25

MUC-OFF USA MUC-OFF USA SILICONE FUNNEL

SILICONE FUNNEL

€5.83

FEULING OIL PUMP CORP. Tire Pressure Gauge

Compact, easy-to-use tool that connects to standard Schrader valves for fast pressure checks.

€22.96

Reamer for Camplate/Oil Pump Tool — Gold, Oil Pump

Out of Stock

FEULING OIL PUMP CORP. Reamer for Camplate/Oil Pump Tool

Lightly machines camplate relief valve seats and re-seats the plunger valve; use with pressure-test tools for Twin Cam and Milwaukee Eight engines.

€115.05

Universal Replacement Dial Indicator — 9016, Black, Silver, Yellow

Out of Stock

FEULING OIL PUMP CORP. Universal Replacement Dial Indicator

Universal replacement dial indicator. Fits Feuling tool part# 9015.

€42.65

Milwaukee Eight Engine Stand — Red, Feuling Parts

Out of Stock

FEULING OIL PUMP CORP. Milwaukee Eight Engine Stand

Fits softail and touring engine cases, mounts using factory front and two rear engine mount bolts, and includes three bench-mount holes.

€119.15

Out of Stock

FEULING OIL PUMP CORP. M8 Oil Pump PSI Tester

Adjustable spring tension to set relief valve pop-off; includes air regulator, 0–100 psi gauge, plugs, gasket and hardware. Fits '17-'24 M8; only for Feuling™ oil pumps. Made in the USA.

€361.58

Replacement Camplate Tool Gasket — Part 9011, Gold

Out of Stock

FEULING OIL PUMP CORP. Replacement Camplate Tool Gasket

Replacement gasket for Camplate tool — direct-fit replacement for part #9010.

€9.37

Replacement Air Regulator for Pressure Relief Testing Tool — 1/8" NPT fitting, 1/4" NPT inlet/outlet, Black

Out of Stock

FEULING OIL PUMP CORP. Replacement Air Regulator for Pressure Relief Testing Tool

Replacement regulator for Feuling pressure relief psi testing tool. 1/8" NPT fitting, 1/4" NPT inlet/outlet. Made in the USA.

€28.30

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS