TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

Removable Wheel Chock — 6-1/2" tire, front, chrome

-€23.34

PINGEL Removable Wheel Chock — 6-1/2" tire, front, chrome

Removable chock secures a motorcycle wheel for transport and storage; brackets stay fastened while the chock is easily removed.

€90.76 €114.10

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

-€4.53

RACE TECH Rebound Piston Ring Compressor — WP fork fitment, gold

Compresses rebound piston ring for insertion into cartridge tube. Required for assembly of newer KTM forks.

€3.72 €8.25

-€3.95

KIMPEX Heavy-Duty Spark Plug Wrench — Chrome

Robust service tool with plated T-handle for easier ignition component maintenance.

€11.17 €15.12

-€15.61

PINGEL Cylinder Head Stand — Yellow, Pair

Secure two-support mounting for cylinder head work; made in the U.S.A.

€60.72 €76.33

-€38.54

PINGEL Wheel Chock for Corrugated Floors — 3-1/2" tire width, Chrome

Removable wheel chock designed for corrugated beds and plywood trailers; includes mounting kit and leaves a near-flush bracket when removed.

€149.90 €188.44

Removable Wheel Chock — 3-1/2" tire width, Chrome, front mount

-€24.05

PINGEL Removable Wheel Chock — 3-1/2" tire width, Chrome, front mount

Stabilizes the front wheel for trailer transport; brackets stay in place while the chock is removed via a T-bolt hold-down screw. Made in the USA. Additional mounting kits sold separately.

€93.56 €117.61

Threaded Cylinder Head Holder — 12 mm, 14 mm, Silver

-€14.52

PINGEL Threaded Cylinder Head Holder — 12 mm, 14 mm, Silver

Mounts in any bench vise and holds the cylinder head securely for all types of head work; shaft includes a drilled hole for wall storage; made in the U.S.A.

€56.44 €70.96

Polaris Roll Pin Punch Tool — fits '90–current Polaris ATVs/UTVs (7661913), Black

-€9.89

QUAD LOGIC Polaris Roll Pin Punch Tool — fits '90–current Polaris...

Removes Polaris driveline roll pins (7661913); use with air or standard hammer. Replace the roll pin each time.

€27.97 €37.86

On sale!
-€27.14

BATTERY TENDER Power Tender™ — 24 V, 2.5 A, Black

Lightweight, fully sealed four-step automatic charger. Includes quick-connect harness and alligator clips. UL/CSA/CE compliant.

€39.22 €66.36

-€20.91

BARNETT Clutch Spring Compression Tool — Black

Compresses diaphragm clutch springs for easy removal and reinstallation of retainer rings. Made in the USA.

€81.32 €102.23

-€11.50

BARNETT Clutch Spring Compression Tool — Black

Tool for removal and reinstallation of retainer rings on diaphragm clutches. Durable and compact for shop or home use. Made in the USA.

€44.69 €56.19

Removable Series E-Track Wheel Chock — 3-1/2" (88.9 mm) tire width, front mount, chrome

-€58.76

PINGEL Removable Series E-Track Wheel Chock — 3-1/2" (88.9 mm) tire...

Removable wheel chock that stabilizes the motorcycle front wheel for trailer transport; patented mounting bracket; tie-down fitting sold separately.

€228.55 €287.31

Removable Series E-Track Wheel Chock — 88.9 mm (3-1/2") tire width, front mount, Chrome

-€58.76

PINGEL Removable Series E-Track Wheel Chock — 88.9 mm (3-1/2") tire...

Removable wheel chock that slides along the track for flexible positioning and secure front-wheel stabilization. Tie-down fitting sold separately.

€228.55 €287.31

Removable Series E-Track Wheel Chock — 6-1/2" tire width, Front mount, Chrome

-€58.76
Out of Stock

PINGEL Removable Series E-Track Wheel Chock — 6-1/2" tire width,...

Flexible placement along the track for multiple bikes.

Stabilizes wheel for trailer transport.

Patented bracket; tie-down fittings sold separately.

€228.55 €287.31

-€58.76

PINGEL Removable Series E-Track Wheel Chock — 6-1/2" tire width, Chrome

Removable wheel chock stabilizes the motorcycle wheel and lets you reposition the chock and tie-downs along the track; tie-down fitting sold separately.

€228.55 €287.31

-€6.53

PINGEL Removable Tie-Down Fitting for E-Track — O-ring end

Quick-install removable tie-down fitting for Series E tracks; sold individually.

€25.42 €31.95

-€8.89
Out of Stock

QUAD LOGIC Polaris Carburetor Choke Nut Tool — Silver, Carburetor

Choke nut wrench for removing and installing choke cable fittings on Mikuni 34–40 mm carburetors. Ideal for quick Polaris carburetor repairs.

€25.11 €34.00

-€11.55

QUAD LOGIC Fuel Pump Nut Wrench for Polaris — Silver

Helps remove stuck fuel pump retainer nuts on Polaris models; reduces time and avoids damage.

€32.64 €44.19

$Snowmobile Lift — 76 cm (30\") , manual, black$

-€31.04
Out of Stock

KIMPEX Snowmobile Lift — 76 cm (30\") , manual, black

Lifts the rear to prevent the track from freezing; seven height settings 25–75 cm; easy, quick to use with non-slip handle.

€87.72 €118.76

-€2.99

KIMPEX Snowmobile Lift Stand Hook — Black

Replacement hook for snowmobile lift stand. Restores secure engagement for safe lifting and servicing.

€8.43 €11.42

$Premium Lift — 46 cm (18\"), Black, Snowmobile$

-€28.21

KIMPEX Premium Lift — 46 cm (18\"), Black, Snowmobile

Manual lift for easy front or rear snowmobile raising; twin hooks for secure attachment; height adjustable from 10" to 18".

€79.73 €107.94

$Winch Lift Kit — 114 cm (45\"), Snowmobile, Black$

-€45.45
Out of Stock

KIMPEX Winch Lift Kit — 114 cm (45\"), Snowmobile, Black

Adjustable winch lift kit raises track 25"–45", prevents freezing to the ground, supports rear suspension; 150 kg max load.

€128.48 €173.93

-€2.80
Out of Stock

KIMPEX Replacement Strap for X-Pro Dolly — X-Pro, Black

Durable replacement lift strap with reinforced webbing and heavy-duty stitching.

€7.91 €10.71

Additional Mounting Plate Kit — Wheel chock mounting kit, center mount, silver

-€21.90

PINGEL Additional Mounting Plate Kit — Wheel chock mounting kit,...

Additional mounting plate with hardware for removable chocks; made for corrugated or textured floors; made in the U.S.A.

€85.18 €107.08

Ball Joint Removal Tool for Strut Front Suspension — '90–'21 ATV/UTV fit, zinc

-€18.40

QUAD LOGIC Ball Joint Removal Tool for Strut Front Suspension — '90–'21...

Two-piece steel tool for removing and installing ball joints on strut-style front suspension. Works with standard shop presses; fits '90–'21 ATV/UTV models.

€52.01 €70.41

-€18.40
Out of Stock

QUAD LOGIC Ball Joint Removal Tool for A-Arm Front Suspension — Zinc

Two-piece steel tool for removing and installing ball joints with a standard shop press; heavy-duty construction; fits 2008-2020 A-arm front suspension ATVs/UTVs (except RZR/General 1000).

€52.01 €70.41

-€32.72

KIMPEX Slide Puller — Silver

Versatile tool for removing internal parts without damage. Non-marring contact points. Durable and easy to use.

€92.45 €125.17

Ball Joint Removal Tool for A-Arm Front Suspension — A-Arm front suspension, zinc

-€18.40
Out of Stock

QUAD LOGIC Ball Joint Removal Tool for A-Arm Front Suspension — A-Arm...

Two-piece steel tool for removing and installing ball joints with a standard shop press; heavy-duty for home or professional shops. Fits '15–'22 ATV/UTV A-Arm front suspensions.

€52.01 €70.41

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS