TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€36.97

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€54.67 €91.64

-€11.41

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€44.40 €55.81

-€46.14

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€179.42 €225.56

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€26.33

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 €128.73

-€3.89

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.14 €19.03

-€10.35

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€40.24 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€46.00

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€178.90 €224.90

-€26.33

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€102.40 €128.73

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€38.80

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€150.91 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€18.25

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€70.99 €89.24

Fuel Transfer System for Delphi Fuel Injection — Black, Fits '01–'25 Harley-Davidson (except V‑Rod)

-€38.60

FUEL-TOOL Fuel Transfer System for Delphi Fuel Injection — Black, Fits...

Transfers up to one quart every 20 seconds; tool-free connection. Includes storage pouch. Fits '01–'25 Harley-Davidson models (except V‑Rod). Made in the USA.

€109.08 €147.68

-€53.44

FUEL-TOOL Fuel Pressure Check Gauge — Delphi fuel injection, Black

Compact gauge for quick, accurate fuel pressure checks on '01-'25 Harley Davidson Delphi fuel-injected models.

€151.05 €204.49

-€9.29

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€36.18 €45.47

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

-€60.51

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€235.80 €296.31

Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

-€6.00

FUEL-TOOL Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

Replacement hooks for check valve rebuild kit; includes two lower O-ring hooks and two upper O-ring hooks; made in the USA.

€16.98 €22.98

-€49.32

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€191.83 €241.15

-€1.85

TECHNORESEARCH O2 Instal Block — TR200055

Compact sampling block for wideband O2 sensors with vent screw for pressure equalization.

€7.19 €9.04

-€86.83

TEXA Cable Case — Black

Same case as included with Marine and Powersports kits; sold empty for cable and small-accessory storage.

€245.45 €332.28

Piston Cooling Jet Pressure Tester Block Kit - Stand Alone Tool — Black, Red kit, fits Twin Cam and M8

-€43.78

FEULING PARTS Piston Cooling Jet Pressure Tester Block Kit - Stand Alone...

Complete set with tool plate, gauge, regulator and hardware. Tests all Twin Cam and M8 piston cooling jets. Stand-alone version for shops lacking the companion reference part.

€123.77 €167.55

-€383.31

TECHNORESEARCH Centurion Super Pro Plus — Electrical system, Black

Professional-grade tester with intuitive controls, rugged housing, and modular expandability for fast, repeatable fault isolation.

€1,490.65 €1,873.96

-€172.34

TECHNORESEARCH Complete Oxygen Sensor Installation Kit — O2 sensor, Black, Clear

Fast, all‑in‑one bung kit for O2 sampling and tuning; includes insertion tool, drill bit, sampler blocks, tubing, 25 rivnuts, screws and copper washers.

€669.24 €841.58

-€14.96

TECHNORESEARCH Bung Refill Kit — O2 sensor, Silver/Yellow

Includes 25 each of bungs, plugs and copper washers.

€58.07 €73.03

-€735.80

TEXA NAVIGATOR TXB Evolution Diagnostics Tool — Black

Compact, advanced diagnostic tool for motorcycles and marine use with expanded CAN protocol support, dynamic test recording, and integrated 16-pin CPC connector.

€2,081.82 €2,817.62

-€52.21

TEXA License Integration Bike — TEXA, AGR96BI

Simple mounting solution to integrate a license on bicycles. The license cannot be returned.

€147.73 €199.94

-€40.16

TEXA License IDC5 Call Center — TEXA, TIB02

Electronic activation for IDC5 call-center features. License cannot be returned.

€113.64 €153.80

-€40.16

TEXA License Solved Errors — TEXA, TIB03

Quick, guided resolution for licensing errors. Non-returnable item; contact support for compatibility and installation help.

€113.64 €153.80

-€40.16

TEXA License TEXINFO Bulletin — TEXA, TIB01

Electronic license for the TEXINFO Bulletin. Non-returnable.

€113.64 €153.80

-€148.61

TEXA License — TEXA, AGR96B, Each

License required when updates are missing. See missing-update tiers 38070753–38070750. Non-returnable.

€420.45 €569.06

-€281.15

TEXA IDC5 PLUS BIKE SOFTWARE — Motorcycle, License

Complete, practical and intuitive diagnostic software that guides you from fault detection to resolution.

€795.45 €1,076.60

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS