TOOLS

-€9.85

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€45.96 €55.81

-€39.81

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€185.75 €225.56

Removable Wheel Chock — 6-1/2" tire, front, chrome

-€20.14

PINGEL Removable Wheel Chock — 6-1/2" tire, front, chrome

Removable chock secures a motorcycle wheel for transport and storage; brackets stay fastened while the chock is easily removed.

€93.96 €114.10

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€22.72

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€106.01 €128.73

-€3.36

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.67 €19.03

-€8.93

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€41.66 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€39.69

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€185.21 €224.90

-€22.72

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€106.01 €128.73

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€33.47

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€156.24 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€15.75

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€73.49 €89.24

-€8.01

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€37.46 €45.47

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

-€52.19

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€244.12 €296.31

-€4.53

RACE TECH Rebound Piston Ring Compressor — WP fork fitment, gold

Compresses rebound piston ring for insertion into cartridge tube. Required for assembly of newer KTM forks.

€3.72 €8.25

-€13.47

PINGEL Cylinder Head Stand — Yellow, Pair

Secure two-support mounting for cylinder head work; made in the U.S.A.

€62.86 €76.33

-€42.55

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€198.60 €241.15

-€1.59

TECHNORESEARCH O2 Instal Block — TR200055

Compact sampling block for wideband O2 sensors with vent screw for pressure equalization.

€7.45 €9.04

-€33.25

PINGEL Wheel Chock for Corrugated Floors — 3-1/2" tire width, Chrome

Removable wheel chock designed for corrugated beds and plywood trailers; includes mounting kit and leaves a near-flush bracket when removed.

€155.19 €188.44

Removable Wheel Chock — 3-1/2" tire width, Chrome, front mount

-€20.75

PINGEL Removable Wheel Chock — 3-1/2" tire width, Chrome, front mount

Stabilizes the front wheel for trailer transport; brackets stay in place while the chock is removed via a T-bolt hold-down screw. Made in the USA. Additional mounting kits sold separately.

€96.86 €117.61

-€1.05

PRO BOLT MEASUREMENT TOOL — Stainless steel, Metric

Handy measuring gauge for thread pitch, thread length and thread diameter from M4–M12.

€5.86 €6.91

Threaded Cylinder Head Holder — 12 mm, 14 mm, Silver

-€12.52

PINGEL Threaded Cylinder Head Holder — 12 mm, 14 mm, Silver

Mounts in any bench vise and holds the cylinder head securely for all types of head work; shaft includes a drilled hole for wall storage; made in the U.S.A.

€58.44 €70.96

Flexible Fast Flow Spout for Tuff Jug Container — fits 5.3 US gal Tuff Jug

-€2.53

TUFF JUG Flexible Fast Flow Spout for Tuff Jug Container — fits 5.3 US...

Internally vented spout that provides fast flow with auto shut-off. Fits 5.3 US gal Tuff Jug containers.

€8.19 €10.72

Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — 2.7 US gal fit, Red

-€7.13

TUFF JUG Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — 2.7...

Replacement ripper cap for fast, low-spill fluid transfer with 2.7 US gal containers.

€23.19 €30.32

-€7.13

TUFF JUG Replacement Ripper Cap for 5 US gal Tuff Jug Container — Red

Replacement ripper cap for fast, low-spill transfer with 5 US gal containers.

€23.19 €30.32

Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — 2.7 US gal, Orange

-€7.13

TUFF JUG Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — 2.7...

Fast-flowing replacement cap for quick, spill-resistant fluid transfer. Easy to install and remove.

€23.19 €30.32

Replacement Ripper Cap for 5 US Gal Tuff Jug Container — 5 US gal, orange

-€7.13

TUFF JUG Replacement Ripper Cap for 5 US Gal Tuff Jug Container — 5 US...

Fast-flowing replacement cap for compatible utility jugs; twist-on installation reduces spills and provides a secure seal.

€23.19 €30.32

-€7.13

TUFF JUG Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — Blue

Fast-flowing replacement cap for 2.7 US gal containers.

€23.19 €30.32

-€7.13

TUFF JUG Replacement Ripper Cap for 5 US Gal Tuff Jug Container — Blue

Fast-flowing cap for five-gallon utility jugs; steady pour with tool-free installation.

€23.19 €30.32

Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — 2.7 US gal, Green

-€7.13

TUFF JUG Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — 2.7...

Replacement cap that delivers fast, low-drip fluid transfer and simple snap-on installation.

€23.19 €30.32

Replacement Ripper Cap for 5 US Gal Tuff Jug Container — 5 US gal, Green

-€7.13

TUFF JUG Replacement Ripper Cap for 5 US Gal Tuff Jug Container — 5 US...

Fast-flowing replacement cap for 5 US gal containers; reduces drips and enables quicker fluid transfer.

€23.19 €30.32

-€7.13

TUFF JUG Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — Black

Fast-flow Ripper Cap for 2.7 US gal Tuff Jug containers — quick pours and reduced spills.

€23.19 €30.32

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS