TOOLS

Subcategories

Camplate Roll Pin Removal/Installation Tool — Red

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€42.98

Camplate Tool — PSI Relief Valve, Black, Red, Silver

FEULING OIL PUMP CORP. Camplate Tool

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€173.68

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€99.12

Pushrod Tube Holder — Pushrod Tube, Black

FEULING OIL PUMP CORP. Pushrod Tube Holder

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€14.65

M8 Oil Pump Roll Pin Remover/Installer Tool — Red

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€38.95

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€173.17

M8 Crankshaft Runout Measuring Tool — Red

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€99.12

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

FEULING OIL PUMP CORP. Valve Spring Seat Cutter

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€146.08

Pilot Seat Cutter for M8 — for 6 mm valves

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€68.72

Oil Pump Gear Alignment Tool — 9017, Black, Silver

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€35.02

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€228.25

MUC-OFF USA MUC-OFF USA SILICONE FUNNEL

SILICONE FUNNEL

€5.83

FEULING OIL PUMP CORP. Tire Pressure Gauge

Compact, easy-to-use tool that connects to standard Schrader valves for fast pressure checks.

€22.96

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS