TOOLS (9)

-€33.70

MOTION PRO Chain Breaker and Riveting Tool — Black

Versatile chain breaker and riveting tool for chains 35–630; includes 2, 3, 4 mm pins and press plates for 50 series.

€95.20 €128.90

-€1.93

MOTION PRO Replacement Chain Rivet Pin — 2 mm, Black

Rivet pin for chain riveting tools that provides precise alignment and secure rivet installation.

€5.43 €7.36

-€1.93

MOTION PRO Replacement Chain Rivet Pin — 3 mm, Black

Replacement rivet pin for chain riveting tools; ensures secure, durable rivet joints.

€5.43 €7.36

-€1.93

MOTION PRO Replacement Chain Rivet Pin — 4 mm, Black

Replacement pin for use with compatible chain riveting tools.

€5.43 €7.36

Replacement Rivet Tip, Chain Tool — 08-0062, Black

-€1.93

MOTION PRO Replacement Rivet Tip, Chain Tool — 08-0062, Black

Replacement rivet tip for use with compatible chain breaker and riveting tools; fits tools with part numbers 08-0058 and 08-0467.

€5.43 €7.36

-€3.25

MOTION PRO Mini Chain Press Tool — 520, 525, 530, 532, Black

Compact press tool for installing side plates on master links. Includes hex key wrench and made in the USA.

€9.18 €12.43

Replacement Fuel Injector Pigtail — For EV6 fuel injector, Black, Gray

-€5.34

MOTION PRO Replacement Fuel Injector Pigtail — For EV6 fuel injector,...

Replacement pigtail for fuel injector cleaning. For use with Motion Pro fuel injector cleaner. Pigtail only.

€15.13 €20.47

-€3.89

MOTION PRO Nitrogen Needle Kit — Brass

Precision needle kit with instructions for filling shocks via a self-sealing rubber valve. Compatible with nitrogen shock gauges. Made in the USA.

€11.06 €14.95

Fork Cap Socket 39 mm — Blue anodized, fits Big Twin® & Sportster®

-€3.89

MOTION PRO Fork Cap Socket 39 mm — Blue anodized, fits Big Twin® &...

Thin 39 mm fork cap socket for removal and installation of 1-3/8" hex fork cap nuts. 1/2" square drive, O-ring protects cap, fits most Big Twin® and Sportster® models.

€15.10 €18.99

-€2.29
Out of Stock

MOTION PRO Dual Drive Mini T-Handle Tool — 1/4" drive, 165.1 mm (6-1/2")

T-handle and shaft drive for tight access; works with sockets, hex drives and crow's foot adapters; compact and durable.

€6.49 €8.78

Ti Prolight™ Wrench Set — 8 mm, 10 mm, 12 mm, 14 mm, Silver

-€42.73
Out of Stock

MOTION PRO Ti Prolight™ Wrench Set — 8 mm, 10 mm, 12 mm, 14 mm, Silver

Extremely lightweight — less than one quarter the weight of a standard wrench. Exclusive optimized design with an ergonomic handle. Not intended for everyday shop use.

€120.75 €163.48

-€24.54
Out of Stock

MOTION PRO Wheel Bearing Remover Set — 8-piece, 10–25 mm, metric, black

Eight-piece bearing remover kit with large and small driver rods and removers for 10–25 mm bearings. Dependable split collet design and heat treated for longevity.

€69.38 €93.92

-€1.48
Out of Stock

MOTION PRO Combo Hex Bit — 3 mm, 4 mm, nickel pewter

Dual-purpose hex bit that fits Motion Pro® Deep Socket and T-Handle Wrench; rubber O-ring secures the bit.

€4.17 €5.65

-€8.56
Out of Stock

MOTION PRO Spinner II T-Handle Tool with Swivel Drive — 12" (30.5 cm),...

Bearing-mounted spinner for faster bolt and nut removal. Two-step drive head for swivel or fixed drive. Chrome-vanadium handle with padded grip.

€24.23 €32.79

Flywheel Puller Right Hand Internal Thread — M33 x 1.5, black oxide

-€11.83
Out of Stock

MOTION PRO Flywheel Puller Right Hand Internal Thread — M33 x 1.5, black...

Reliable right-hand flywheel puller for safe removal of flywheels and rotors. Heat treated, durable finish, lifetime limited warranty.

€33.42 €45.25

-€8.59
Out of Stock

MOTION PRO Spinner II T-Handle Tool with Swivel Drive — 12", 1/4", Blue

Bearing-mounted spinner for faster bolt and nut removal; two-step drive head for swivel or fixed drive; padded grip for comfort.

€24.26 €32.85

Flywheel Puller Right Hand Internal Thread — M24 x 1.5, right-hand thread, black oxide

-€7.39
Out of Stock

MOTION PRO Flywheel Puller Right Hand Internal Thread — M24 x 1.5,...

Precision flywheel puller with right-hand internal thread. Heat treated, durable protective finish, lifetime limited warranty.

€20.89 €28.28

-€22.19
Out of Stock

MOTION PRO Flywheel Puller Internal Thread — M50 x 1.5, Black oxide

Removes flywheel or rotor. Heat-treated for strength. Laser-etched identification. Includes crank protector. Right-hand thread. Durable corrosion-resistant finish. Lifetime limited warranty.

€62.68 €84.87

Valve Stem Seal Tool — 4 mm, Blue anodized

-€3.85
Out of Stock

MOTION PRO Valve Stem Seal Tool — 4 mm, Blue anodized

Contoured install tools that protect valve stem seals, hold four seals at once, and ensure straight, damage-free installation.

€10.85 €14.70

Tie-Down Clamp — 31.8 mm (1-1/4"), anodized

-€12.89
Out of Stock

PSR Tie-Down Clamp — 31.8 mm (1-1/4"), anodized

Instant anchor points with an oval opening for single or double hooks. Rubber insert protects fork surfaces.

€50.14 €63.03

-€5.15
Out of Stock

SW-MOTECH Legend Gear Shoulder Strap

The Legend Gear LA4 shoulder strap is designed to convert series bags into a comfortable shoulder bag with adjustable length and durable materials.

€20.06 €25.21

-€2.24
Out of Stock

SW-MOTECH Retention Straps for Drybag M/L — 4-pack, black

Replacement retention straps compatible with Drybag M and Drybag L. Pack includes four straps for straightforward swap-out.

€8.68 €10.92

Strap Set Legend — 4 loop straps (80 cm), 2 mounting straps (100 cm), Black

-€1.38
Out of Stock

SW-MOTECH Strap Set Legend — 4 loop straps (80 cm), 2 mounting straps...

Four 80 cm loop straps and two 100 cm mounting straps for securing Legend Gear bags. Polyamide webbing with anodized aluminum buckles.

€5.34 €6.72

Crankcase Splitter V2 — Aluminum and steel, black and blue anodized

-€52.83
Out of Stock

MOTION PRO Crankcase Splitter V2 — Aluminum and steel, black and blue...

Fast, easy-to-use crankcase splitter with 5 mm, 6 mm and 8 mm puller stud threads, captured retaining collars, grooved studs and molded storage tray.

€205.44 €258.27

-€13.22
Out of Stock

PSR Fork Tube Tie-Down — 60 mm (2.4 in) I.D., anodized

Patented clamp for tie-down anchoring on most MX upside-down forks; rubber insert protects fork; 60 mm I.D.; pair.

€51.39 €64.61

Tie-Down Clamp — 25.4 mm (1"), pair, anodized

-€14.16
Out of Stock

PSR Tie-Down Clamp — 25.4 mm (1"), pair, anodized

Instant anchor points for most powersport vehicles. Oval opening fits single or double hooks. Rubber insert protects fork surfaces.

€55.03 €69.19

Tie-Down Clamp — 38.1 mm (1-1/2 in), Anodized

-€14.16
Out of Stock

PSR Tie-Down Clamp — 38.1 mm (1-1/2 in), Anodized

Instant anchor points for tie-downs on most powersport vehicles. Oval opening for single or double hooks; rubber insert protects fork surfaces.

€55.03 €69.19

Clutch Adjuster Nut Tool — 11/16" clutch adjuster lock nut, fits '98 and later Big Twin Harley-Davidson models, black

-€4.38
Out of Stock

MOTION PRO Clutch Adjuster Nut Tool — 11/16" clutch adjuster lock nut,...

Through-hole design holds the clutch adjuster screw while tightening the 11/16" lock nut; deep socket fits into the clutch basket; compact for saddlebags. Not for hydraulic clutches.

€12.40 €16.78

Replacement Pin for Mario™ Single-Sided Stand — 21.7 mm (0.85"), bronze, fits Ducati (except 1098)

-€9.08
Out of Stock

PSR Replacement Pin for Mario™ Single-Sided Stand — 21.7 mm...

Replacement pin for single-sided rear stands. Sold individually. Verify fitment before purchase.

€35.33 €44.41

Big Mike Triple Tree Stand Pins — 19 mm (0.75") pin diameter, front

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 19 mm (0.75") pin diameter,...

Model-specific triple tree pins; order by steering stem hole size. Intended for use with front stands.

€13.53 €17.02

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS