TOOLS (8)

-€5.52

MOTION PRO Wheel Alignment Tool — Rear wheel

Quick checks for correct wheel alignment to improve handling and reduce drive belt and pulley wear; works without removing most exhaust systems.

€21.47 €26.99

-€7.33

MOTION PRO PinKlaw Push Pin Tool — 20 mm, silver

Removes plastic push pins up to 20 mm. Compact design for tight spaces and a grippy handle for secure use. For plastic push pins only.

€20.69 €28.02

T6 Combo Lever Set - 24 mm & 10/12 mm — Silver anodized, 7075-T6 aluminum

-€23.18

MOTION PRO T6 Combo Lever Set - 24 mm & 10/12 mm — Silver anodized,...

Two precision tire levers with stepped 10/12 mm box-end, a 24 mm axle hex, no-pinch tip, and hex ends rated to 90 lb/ft.

€65.57 €88.75

Wheel Bearing Driver Set for Harley Davidson — Blue anodized, ’00 and later models

-€13.30

MOTION PRO Wheel Bearing Driver Set for Harley Davidson — Blue anodized,...

Quick-change adapters, laser-etched identification, includes common driver sizes; fits '00 and later Harley Davidson models.

€51.69 €64.99

-€13.31

MOTION PRO Pin Spanner Wrench — Blue anodized

Curved machined arms and low-profile pins for easy access to fork caps and shock adjusters; includes replaceable 3 mm and 4 mm pins. For low-torque use only.

€37.61 €50.92

Clutch Spring Compression Tool — Black, fits '90-'97 Big Twins, '91-'22 Evo Sportster, '95-'01 Buell models

-€20.70

MOTION PRO Clutch Spring Compression Tool — Black, fits '90-'97 Big...

Makes clutch removal and installation faster and easier on Harley-Davidson® and Buell® models; fits '90-'97 Big Twins, '91-'22 Evo Sportster, '95-'01 Buell.

€58.50 €79.20

-€20.91

BARNETT Clutch Spring Compression Tool — Black

Compresses diaphragm clutch springs for easy removal and reinstallation of retainer rings. Made in the USA.

€81.32 €102.23

-€11.50

BARNETT Clutch Spring Compression Tool — Black

Tool for removal and reinstallation of retainer rings on diaphragm clutches. Durable and compact for shop or home use. Made in the USA.

€44.69 €56.19

-€7.01

MOTION PRO Keihin FCR Carb Tool — Black

Compact tool for Keihin FCR carburetors with long-reach bits, 6 mm and 3 mm hex drivers, and a cap compartment for spare main jets.

€19.81 €26.82

Valve Core Remover/Installer — For Schrader valve, Black

-€1.33

MOTION PRO Valve Core Remover/Installer — For Schrader valve, Black

Removes and installs standard valve cores in tubed or tubeless stems. Compact tool ideal for tool packs and workshop kits.

€3.76 €5.09

Fork Seal Bullet — For 36 mm fork leg, Red

-€1.48

MOTION PRO Fork Seal Bullet — For 36 mm fork leg, Red

Protects the fork seal and wiper during installation; eliminates the need to wrap the fork tube with tape.

€4.17 €5.65

-€1.48

MOTION PRO Fork Seal Bullet — 43 mm fork leg, green

Protects the fork seal and wiper during installation; eliminates the need to wrap the fork tube with tape. Easy to use.

€4.17 €5.65

-€1.48

MOTION PRO Fork Seal Bullet — 45 mm, Yellow

Protects the fork seal and wiper during installation; eliminates the need to wrap the fork tube with tape.

€4.17 €5.65

-€1.48

MOTION PRO Fork Seal Bullet — 46 mm fork leg, Black

Protects the fork seal and wiper from damage by the bushing groove during installation.

Eliminates the need to wrap the fork tube with tape, saving time.

€4.17 €5.65

-€1.48

MOTION PRO Fork Seal Bullet — 47 mm fork leg, white

Protects fork seal and wiper during installation and removes the need to wrap the fork tube with tape.

€4.17 €5.65

-€15.53

MOTION PRO KTM Fork Cap Tool — 22 mm hex, 3/8-inch square drive, Silver

Slotted tool for remove and replace service of accessory fork caps; features 22 mm hex and 3/8" square drive, compatible with P/N 11-0081 Micro Bleeders™.

€33.28 €48.81

$Spoon Tire Iron — 25.4 cm (10\"), nickel, pewter$

-€6.20

MOTION PRO Spoon Tire Iron — 25.4 cm (10\"), nickel, pewter

Professional spoon tire iron with a curved end for secure grip. 25 mm spoon width; weighs 7.1 oz.

€17.56 €23.76

Damper Rod Fork Tool — 41 mm, 43 mm, 46 mm, 47 mm, Kayaba, Showa, Black

-€12.76

MOTION PRO Damper Rod Fork Tool — 41 mm, 43 mm, 46 mm, 47 mm, Kayaba,...

Aids assembly and disassembly of most 41–47 mm inverted forks; hardened construction; not required on '91–'92 Honda CR models.

€36.07 €48.83

-€8.54

MOTION PRO Pilot Screw Adjustment Tool — 17" length, Black, Red

Straight-slot blade and 110° angled head reach recessed pilot screws for precise air/fuel mixture adjustments.

€24.15 €32.69

-€5.04

MOTION PRO Ignition System Tester — Black

Tests ignition systems on most motorcycles, watercraft, ATVs and snowmobiles.

Adjustable spark gap 0–10 mm for service testing.

Diagnoses spark strength and system integrity.

€14.23 €19.27

-€4.74

MOTION PRO Classic Spoke Wrench — 6 mm, 6.3 mm, Silver, Nickel, Pewter

Quick, reliable spoke adjustments with square-end openings and an offset slotted end for tight spaces.

€13.36 €18.10

Jumbo Chain Tool — fits 420–630 chains, rivets up to 530

-€40.18

MOTION PRO Jumbo Chain Tool — fits 420–630 chains, rivets up to 530

Heavy-duty jumbo chain tool for breaking and riveting roller chains; includes master link side plate press kit and a boltable base for use with power wrenches.

€113.58 €153.76

-€4.28

MOTION PRO Hydraulic Brake Bleeder — Chrome

Unique check valve prevents air re-entry; enables one-person bleeding. Includes instructions and hose. Will not bleed a dry system.

€12.13 €16.41

Chain Breaker with Folding Handle — Fits 420–530 chains, max pin extension 18 mm

-€10.15

MOTION PRO Chain Breaker with Folding Handle — Fits 420–530 chains, max...

Compact chain breaker with folding handle. Pushes link pins completely through the side plate; max pin extension 18 mm. For 420 to 530 chains. Made in the USA.

€28.69 €38.84

-€1.18

MOTION PRO Replacement Pin for Chain Breaker — Motion Pro, 08-0002, Black

Heat-treated replacement component for folding chain and lightweight chain press tools; replaces part #08-0001 and #08-0358.

€3.33 €4.51

$Enduro Pro Tire Iron PR — 8-1/2\" (21.5 cm), Chrome$

-€8.27

MOTION PRO Enduro Pro Tire Iron PR — 8-1/2\" (21.5 cm), Chrome

Professional-grade tire iron with a slender curved profile and custom vinyl carrying pouch. Weighs 4-1/2 oz.

€23.35 €31.62

Replacement Brass Adapter for SyncPro™ Carburetor Tuner — 5 mm, set of 4

-€2.52

MOTION PRO Replacement Brass Adapter for SyncPro™ Carburetor Tuner — 5...

Replacement adapter set for use with Motion Pro™ Carburetor Tuner; includes two long and two short adapters of the same size.

€7.11 €9.63

Replacement Brass Adapter for SyncPro™ Carburetor Tuner — 6 mm, set of 4

-€2.89

MOTION PRO Replacement Brass Adapter for SyncPro™ Carburetor Tuner — 6...

Replacement carburetor adapter set. Includes two long and two short adapters of the same size.

€8.16 €11.05

-€11.33

MOTION PRO Clutch Holding Tool — Silver, Steel

Holds clutch hubs, flywheels, gears and sprockets. Recommended for square tooth-style clutch hubs. Features 8 mm spanner pins; jaws open up to 5" wide. Will not work on clutch baskets with reversed inner clutch hubs. Not recommended for V-groove or half-round-style clutch hubs. Replaces HD tool# HD-91042; used on '84 and later 1340 cc models and '84 and earlier sportster models.

€32.05 €43.38

Shock Collar Spanner Wrench — 68 mm & 87 mm OD, 8 mm notch, Black

-€4.88

MOTION PRO Shock Collar Spanner Wrench — 68 mm & 87 mm OD, 8 mm notch, Black

Sized for 68 mm and 87 mm OD lock rings with an 8 mm notch; fits many street, off-road and ATV single-shock applications.

€13.80 €18.68

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS