TOOLS (7)

-€8.71

KIBBLEWHITE Valve Guide Ball Hone — 5.5 mm, Black

Durable ball hone for sizing C630 bronze and cast iron valve guide materials. Made in the U.S.A.

€24.65 €33.36

Precision Reamer for Manganese Bronze Valve Guides — 7.9 mm (0.3110"), 181 mm (7.125"), Nickel

-€20.99

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 7.9 mm...

Reamer engineered for KPMI manganese bronze and cast iron valve guides. Not for C630 nickel aluminum bronze. Cutting diameters +/- .0002".

€59.41 €80.40

$Precision Reamer for Manganese Bronze Valve Guides — 8.6 mm (0.3370\"), 181 mm (7.125\")$

-€31.85

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 8.6 mm...

Precision reamer engineered for KPMI manganese bronze and cast iron valve guides. Not for C630 nickel aluminum bronze. Cutting diameters +/- .0002".

€90.09 €121.94

$Precision Reamer for Manganese Bronze Valve Guides — 9.6 mm (0.3780\"), 181 mm (7.125\")$

-€25.75

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 9.6 mm...

Precision reamer for KPMI manganese bronze and cast iron valve guides. Not for C630 nickel aluminum bronze. Cutting diameters ± .0002".

€72.84 €98.59

$Precision Reamer for Manganese Bronze Valve Guides — 7.8 mm (0.31\"), 181 mm (7.125\"), Nickel$

-€27.10

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 7.8 mm...

Precision reamer engineered for KPMI manganese bronze and cast iron valve guides. Not for C630 nickel-aluminum bronze. Cutting diameters ±0.0002"

€76.72 €103.82

Precision Reamer for Manganese Bronze Valve Guides — 7 mm, 181 mm, Nickel

-€19.09

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 7 mm, 181...

Precision reamer for manganese bronze and cast iron valve guides. Not advisable to use a reamer on bronze after it has been used on cast iron. Do not use on C630 nickel aluminum bronze. Cutting diameters +/- .0002".

€54.03 €73.12

-€24.26

JIMS Rocker Box Alignment Screws — Rocker Box Cover, Black, Pair

Prevents cover misalignment that can compromise the seal and cause rocker interference. Made in the U.S.A.

€94.40 €118.66

Valve Guide Seal Installation Tools — Valve guide, 6061 T6 aluminum, set

-€10.19

KIBBLEWHITE Valve Guide Seal Installation Tools — Valve guide, 6061 T6...

Two-piece seal installer that centers valve seals for accurate, repeatable seating while minimizing burr formation.

€34.57 €44.76

Replacement Valve Guide Seal Installation Tool — Valve Guide, Red anodized

-€2.54

KIBBLEWHITE Replacement Valve Guide Seal Installation Tool — Valve Guide,...

Precision tool for workshop use; delivers repeatable alignment and seating for small mechanical components.

€7.10 €9.64

Replacement Valve Guide Seal Installation Tool — Blue anodized, 6061 T6 aluminum

-€2.54

KIBBLEWHITE Replacement Valve Guide Seal Installation Tool — Blue...

Replacement seal installers for guide seal installation tool sets — easy, consistent seating and simplified service workflow.

€7.10 €9.64

-€2.54

KIBBLEWHITE Replacement Valve Guide Seal Installation Tool — Silver anodized

Replacement seal installer for valve guide seal installation sets. Provides precise positioning, reduces rework, and is compact for shop use.

€7.10 €9.64

-€26.17

JIMS Flywheel Puller Tool — Black

Safe, reliable flywheel removal with solid engagement and minimal risk to surrounding parts. Made in the U.S.A.

€101.76 €127.93

-€18.99

JIMS Clutch Spring Compressor Adapter — Victory, blue anodized

Securely seats clutch springs for safe removal and installation. Made in the USA. Use with compressor Part# DS-197060.

€73.83 €92.82

-€20.62
Out of Stock

JIMS Valve Spring Collar — Adapter, Black, Part 5808

Allows an existing compressor to remove smaller valves on M8 engines. For use with JIMS® Valve Spring Compressor Tool (PART# DS-196013). Made in the U.S.A.

€80.18 €100.80

-€11.71

JIMS Alignment Screw — Milwaukee Eight™ engine series, Gray, Red

Holds the two halves of the spring-loaded balancer scissor gear in alignment before removal; bright color reminds technician to remove before sealing the engine case. For use on the Milwaukee Eight™ engine series.

€45.53 €57.24

-€64.02

JIMS Main Bearing Remover and Installer — Engine Case, Black

Precision tool for removing and installing left and right main bearings on Milwaukee Eight® motorcycles.

€248.95 €312.97

Mighty Bite Flywheel Lock — Milwaukee Eight™ fit, blue

-€14.45
Out of Stock

JIMS Mighty Bite Flywheel Lock — Milwaukee Eight™ fit, blue

Secures the flywheel during service; installs in the case in place of the crank position sensor; for Milwaukee Eight™ engines.

€56.23 €70.68

-€32.45
Out of Stock

JIMS Engine Stand — JIMS, 5826

Fits Milwaukee-Eight Softail engines; made from 7 gauge (.1875") steel; powder-coated blue finish.

€126.18 €158.63

-€21.32
Out of Stock

JIMS Two-Sided Head Holder Tool — JIMS, Milwaukee Eight, 14 mm & 12 mm

Easily positions the head for all types of work. Use through the spark plug hole to hold the head in a vice. Fits Milwaukee Eight engines. 14 mm and 12 mm ends.

€82.92 €104.24

-€75.73

JIMS Main Seal Installer/Remover — Fits Milwaukee Eight engines

Tool for installing and removing main crank seals on Milwaukee Eight engines.

€294.49 €370.22

-€54.21
Out of Stock

JIMS Main Seal Tool — Crankcase, Black

Installs and removes the engine main seal while the engine remains in the chassis. Includes adapters for '88 and '96 Twin Cams. Made in the U.S.A.

€210.81 €265.02

-€46.15

JIMS Ball Bearing Removal Tool — JIMS, 5832

Easily removes balancer bearings in Touring and Softail models without damaging the crankcase.

€179.48 €225.63

Balancer Bearing Installer — Crankcase, P/N 5833, Black/Blue/Silver

-€60.03
Out of Stock

JIMS Balancer Bearing Installer — Crankcase, P/N 5833,...

Precision installer for balancer bearings on Milwaukee-Eight® (M8) engines; aligns to case bolt and dowel locations for press-free bench installation.

€233.47 €293.50

-€14.34

JIMS Remote Start Button — Black

Momentary remote start button with 4' lead cable and alligator clip for starter positive and motor negative hookups. Ideal for tappet adjustment, service and diagnostics.

€55.76 €70.10

Case Splitting Tool for M8 — Black, Crankcase

-€90.12

JIMS Case Splitting Tool for M8 — Black, Crankcase

Mounts on the primary side to split crankcases by hand for lower-end service and performance work.

€350.43 €440.55

-€27.83

JIMS Hardware Organizer — Top End, Blue anodized

Modular trays and stands keep parts organized for assembly, teardown, and storage. Stands nest to save space. Made in the U.S.A.

€108.19 €136.02

-€68.11
Out of Stock

JIMS Saddlebag Latch And Hinge Rivet Tool — Black

Secures latches and hinges with rivets for a clean, factory look. Made in the U.S.A.

€264.85 €332.96

-€135.80
Out of Stock

JIMS Front Fork Compressor Tool — Black, Silver

Compresses springs in cartridge-style forks for servicing and rebuilding. Includes FLT adapter and special rod for the damper rod. Mounts in a vise. Made in the U.S.A.

€528.13 €663.93

-€8.99
Out of Stock

JIMS Shifter Arm Adjusting Screw — Transmission

High-quality OEM replacement shifter arm adjusting screw for precise shifting. Made in the U.S.A.

€34.94 €43.93

-€598.17
Out of Stock

JIMS Top-End Oiling Kit — EVO fit, valve train

Precision valve train kit for Evolution-style oiling of the Shovelhead top-end. Includes Powerglide tappets, Worksaver pushrods, chrome tappet blocks and roller rocker arms. Easy-to-follow instructions; made in the U.S.A.

€2,326.20 €2,924.37

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS