TOOLS (7)

Twin Cam "B" Motor Case Support Blocks — Left side, Engine case, Black

-€32.56
Out of Stock

JIMS Twin Cam "B" Motor Case Support Blocks — Left side, Engine...

Aluminum support blocks with Delrin® pads protect and level the Twin Cam "B" engine case during balancer bearing service.

€126.66 €159.22

Cam Bearing Installation Tool — JIMS, Cam, Black

-€64.12
Out of Stock

JIMS Cam Bearing Installation Tool — JIMS, Cam, Black

Installs the two inner cam bearings and sets them .023"-.028" below the case surface.

€249.39 €313.51

-€8.93
Out of Stock

JIMS Valve Guide Adapter — 7 mm, black

Stand-supported tool for pressing valve guides in and out. For 7 mm valve guides. Made in the U.S.A.

€34.75 €43.68

-€49.09
Out of Stock

JIMS Feeler Gauge Set — .002–.011 in, Blue/Silver

Precision thickness insert kit with two holders and nine sizes (.002"–.011") for tight-access adjustments. Made in the U.S.A.

€190.93 €240.02

Cruise Drive Main Case Seal Installer — 6-Speed, Main Drive Gear, Black, Blue

-€55.81
Out of Stock

JIMS Cruise Drive Main Case Seal Installer — 6-Speed, Main Drive...

Driver-style installer for main case seals that sets the seal to the correct depth without stressing bearings or seals. Made in the U.S.A.

€217.06 €272.87

Interconnect Seal Leak Testing Tool — Balancer tensioner plate, right, blue

-€16.68
Out of Stock

JIMS Interconnect Seal Leak Testing Tool — Balancer tensioner...

Tool to test and verify interconnect seal integrity, preventing over‑oiling and associated horsepower loss.

€64.84 €81.52

-€61.52
Out of Stock

JIMS 7mm Valve Guide Reamer — Valve guide, silver

Reamer for 7 mm valve guides, including Harley-Davidson® No. 16461-02. Quality pilot lead-in for precise reaming. Made in the U.S.A.

€239.20 €300.72

Motor Stand — For Twin Cam B Motor, blue powder-coated

-€34.19
Out of Stock

JIMS Motor Stand — For Twin Cam B Motor, blue powder-coated

Improves access for engine work and provides stable support. Made in the USA.

€132.92 €167.11

-€96.10
Out of Stock

JIMS Tappet Pump and Test Stand — For '99-'20 Big Twins, Blue

Tool for diagnosing and filling hydraulic tappets; designed for '99-'20 Big Twins. Made in the USA.

€373.72 €469.82

-€11.26
Out of Stock

JIMS Slim Oil Filter Wrench — 14-flute, Silver

Exclusive slim design for easier access near the oil cooler and crankcase position sensor. More room to work around exhaust pipes, frame, hoses and brackets. Made in the U.S.A.

€43.80 €55.06

-€30.56
Out of Stock

FEULING OIL PUMP CORP. Reamer for Camplate/Oil Pump Tool — Gold, Oil Pump

Lightly machines camplate relief valve seats and re-seats the plunger valve; use with pressure-test tools for Twin Cam and Milwaukee Eight engines.

€118.85 €149.41

-€24.26
Out of Stock

JIMS Rocker Box Alignment Screws — Rocker Box Cover, Black, Pair

Prevents cover misalignment that can compromise the seal and cause rocker interference. Made in the U.S.A.

€94.40 €118.66

Universal Replacement Dial Indicator — 9016, Black, Silver, Yellow

-€11.30
Out of Stock

FEULING OIL PUMP CORP. Universal Replacement Dial Indicator — 9016, Black, Silver,...

Universal replacement dial indicator. Fits Feuling tool part# 9015.

€44.06 €55.36

-€26.09
Out of Stock

JIMS Vacuum Tappet "Pump Up" Tool — Hydraulic pump, Black, Clear

Bleeds and pumps up hydraulic lifters, holds up to four lifters in a vacuum jar, and prepares them for installation.

€101.45 €127.54

-€26.17
Out of Stock

JIMS Flywheel Puller Tool — Black

Safe, reliable flywheel removal with solid engagement and minimal risk to surrounding parts. Made in the U.S.A.

€101.76 €127.93

-€18.99
Out of Stock

JIMS Clutch Spring Compressor Adapter — Victory, blue anodized

Securely seats clutch springs for safe removal and installation. Made in the USA. Use with compressor Part# DS-197060.

€73.83 €92.82

-€31.65
Out of Stock

FEULING OIL PUMP CORP. Milwaukee Eight Engine Stand — Red, Feuling Parts

Fits softail and touring engine cases, mounts using factory front and two rear engine mount bolts, and includes three bench-mount holes.

€123.09 €154.74

-€11.71
Out of Stock

JIMS Alignment Screw — Milwaukee Eight™ engine series, Gray, Red

Holds the two halves of the spring-loaded balancer scissor gear in alignment before removal; bright color reminds technician to remove before sealing the engine case. For use on the Milwaukee Eight™ engine series.

€45.53 €57.24

-€64.02
Out of Stock

JIMS Main Bearing Remover and Installer — Engine Case, Black

Precision tool for removing and installing left and right main bearings on Milwaukee Eight® motorcycles.

€248.95 €312.97

Mighty Bite Flywheel Lock — Milwaukee Eight™ fit, blue

-€14.45
Out of Stock

JIMS Mighty Bite Flywheel Lock — Milwaukee Eight™ fit, blue

Secures the flywheel during service; installs in the case in place of the crank position sensor; for Milwaukee Eight™ engines.

€56.23 €70.68

-€32.45
Out of Stock

JIMS Engine Stand — JIMS, 5826

Fits Milwaukee-Eight Softail engines; made from 7 gauge (.1875") steel; powder-coated blue finish.

€126.18 €158.63

-€21.32
Out of Stock

JIMS Two-Sided Head Holder Tool — JIMS, Milwaukee Eight, 14 mm & 12 mm

Easily positions the head for all types of work. Use through the spark plug hole to hold the head in a vice. Fits Milwaukee Eight engines. 14 mm and 12 mm ends.

€82.92 €104.24

-€96.05
Out of Stock

FEULING OIL PUMP CORP. M8 Oil Pump PSI Tester — Red

Adjustable spring tension to set relief valve pop-off; includes air regulator, 0–100 psi gauge, plugs, gasket and hardware. Fits '17-'24 M8; only for Feuling™ oil pumps. Made in the USA.

€373.53 €469.58

-€75.73
Out of Stock

JIMS Main Seal Installer/Remover — Fits Milwaukee Eight engines

Tool for installing and removing main crank seals on Milwaukee Eight engines.

€294.49 €370.22

-€54.21
Out of Stock

JIMS Main Seal Tool — Crankcase, Black

Installs and removes the engine main seal while the engine remains in the chassis. Includes adapters for '88 and '96 Twin Cams. Made in the U.S.A.

€210.81 €265.02

-€46.15
Out of Stock

JIMS Ball Bearing Removal Tool — JIMS, 5832

Easily removes balancer bearings in Touring and Softail models without damaging the crankcase.

€179.48 €225.63

Balancer Bearing Installer — Crankcase, P/N 5833, Black/Blue/Silver

-€60.03
Out of Stock

JIMS Balancer Bearing Installer — Crankcase, P/N 5833,...

Precision installer for balancer bearings on Milwaukee-Eight® (M8) engines; aligns to case bolt and dowel locations for press-free bench installation.

€233.47 €293.50

"On-Bike" Valve Spring Compressor — Fits Milwaukee-Eight, Black

-€70.30
Out of Stock

JIMS "On-Bike" Valve Spring Compressor — Fits Milwaukee-Eight, Black

On-bike compressor for removing valve spring keepers, collars, and springs without full teardown; designed for Milwaukee-Eight® engines.

€273.36 €343.66

-€14.34
Out of Stock

JIMS Remote Start Button — Black

Momentary remote start button with 4' lead cable and alligator clip for starter positive and motor negative hookups. Ideal for tappet adjustment, service and diagnostics.

€55.76 €70.10

Case Splitting Tool for M8 — Black, Crankcase

-€90.12
Out of Stock

JIMS Case Splitting Tool for M8 — Black, Crankcase

Mounts on the primary side to split crankcases by hand for lower-end service and performance work.

€350.43 €440.55

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company