TOOLS (7)

-€21.59

JIMS Pushrod Cover Clip — Pushrod, Black

Quick one-hand tool for installing and removing cover clips. Won't mar or slip. Made in the U.S.A.

€83.97 €105.56

-€8.93

JIMS Valve Guide Adapter — 7 mm, black

Stand-supported tool for pressing valve guides in and out. For 7 mm valve guides. Made in the U.S.A.

€34.75 €43.68

-€49.09
Out of Stock

JIMS Feeler Gauge Set — .002–.011 in, Blue/Silver

Precision thickness insert kit with two holders and nine sizes (.002"–.011") for tight-access adjustments. Made in the U.S.A.

€190.93 €240.02

Cruise Drive Main Case Seal Installer — 6-Speed, Main Drive Gear, Black, Blue

-€55.81

JIMS Cruise Drive Main Case Seal Installer — 6-Speed, Main Drive...

Driver-style installer for main case seals that sets the seal to the correct depth without stressing bearings or seals. Made in the U.S.A.

€217.06 €272.87

Interconnect Seal Leak Testing Tool — Balancer tensioner plate, right, blue

-€16.68

JIMS Interconnect Seal Leak Testing Tool — Balancer tensioner...

Tool to test and verify interconnect seal integrity, preventing over‑oiling and associated horsepower loss.

€64.84 €81.52

-€61.52

JIMS 7mm Valve Guide Reamer — Valve guide, silver

Reamer for 7 mm valve guides, including Harley-Davidson® No. 16461-02. Quality pilot lead-in for precise reaming. Made in the U.S.A.

€239.20 €300.72

Motor Stand — For Twin Cam B Motor, blue powder-coated

-€34.19

JIMS Motor Stand — For Twin Cam B Motor, blue powder-coated

Improves access for engine work and provides stable support. Made in the USA.

€132.92 €167.11

-€96.10

JIMS Tappet Pump and Test Stand — For '99-'20 Big Twins, Blue

Tool for diagnosing and filling hydraulic tappets; designed for '99-'20 Big Twins. Made in the USA.

€373.72 €469.82

-€24.26

JIMS Rocker Box Alignment Screws — Rocker Box Cover, Black, Pair

Prevents cover misalignment that can compromise the seal and cause rocker interference. Made in the U.S.A.

€94.40 €118.66

-€13.22
Out of Stock

PSR Fork Tube Tie-Down — 60 mm (2.4 in) I.D., anodized

Patented clamp for tie-down anchoring on most MX upside-down forks; rubber insert protects fork; 60 mm I.D.; pair.

€51.39 €64.61

Tie-Down Clamp — 25.4 mm (1"), pair, anodized

-€14.16

PSR Tie-Down Clamp — 25.4 mm (1"), pair, anodized

Instant anchor points for most powersport vehicles. Oval opening fits single or double hooks. Rubber insert protects fork surfaces.

€55.03 €69.19

-€26.17

JIMS Flywheel Puller Tool — Black

Safe, reliable flywheel removal with solid engagement and minimal risk to surrounding parts. Made in the U.S.A.

€101.76 €127.93

Tie-Down Clamp — 38.1 mm (1-1/2 in), Anodized

-€14.16

PSR Tie-Down Clamp — 38.1 mm (1-1/2 in), Anodized

Instant anchor points for tie-downs on most powersport vehicles. Oval opening for single or double hooks; rubber insert protects fork surfaces.

€55.03 €69.19

-€18.99

JIMS Clutch Spring Compressor Adapter — Victory, blue anodized

Securely seats clutch springs for safe removal and installation. Made in the USA. Use with compressor Part# DS-197060.

€73.83 €92.82

-€84.85

JIMS Milwaukee-Eight® Cam Bearing Tool — Black

Precision tool for camshaft inner needle bearing installation with tighter tolerances for accurate depth. Proven remover collet and fine-threaded installation driver. Made in the U.S.A.

€329.98 €414.83

-€20.62

JIMS Valve Spring Collar — Adapter, Black, Part 5808

Allows an existing compressor to remove smaller valves on M8 engines. For use with JIMS® Valve Spring Compressor Tool (PART# DS-196013). Made in the U.S.A.

€80.18 €100.80

-€11.71

JIMS Alignment Screw — Milwaukee Eight™ engine series, Gray, Red

Holds the two halves of the spring-loaded balancer scissor gear in alignment before removal; bright color reminds technician to remove before sealing the engine case. For use on the Milwaukee Eight™ engine series.

€45.53 €57.24

-€64.02

JIMS Main Bearing Remover and Installer — Engine Case, Black

Precision tool for removing and installing left and right main bearings on Milwaukee Eight® motorcycles.

€248.95 €312.97

Replacement Pin for Mario™ Single-Sided Stand — 21.7 mm (0.85"), bronze, fits Ducati (except 1098)

-€9.08
Out of Stock

PSR Replacement Pin for Mario™ Single-Sided Stand — 21.7 mm...

Replacement pin for single-sided rear stands. Sold individually. Verify fitment before purchase.

€35.33 €44.41

Mighty Bite Flywheel Lock — Milwaukee Eight™ fit, blue

-€14.45
Out of Stock

JIMS Mighty Bite Flywheel Lock — Milwaukee Eight™ fit, blue

Secures the flywheel during service; installs in the case in place of the crank position sensor; for Milwaukee Eight™ engines.

€56.23 €70.68

-€32.45

JIMS Engine Stand — JIMS, 5826

Fits Milwaukee-Eight Softail engines; made from 7 gauge (.1875") steel; powder-coated blue finish.

€126.18 €158.63

Big Mike Triple Tree Stand Pins — 19 mm (0.75") pin diameter, front

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 19 mm (0.75") pin diameter,...

Model-specific triple tree pins; order by steering stem hole size. Intended for use with front stands.

€13.53 €17.02

-€21.32

JIMS Two-Sided Head Holder Tool — JIMS, Milwaukee Eight, 14 mm & 12 mm

Easily positions the head for all types of work. Use through the spark plug hole to hold the head in a vice. Fits Milwaukee Eight engines. 14 mm and 12 mm ends.

€82.92 €104.24

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 13 mm, front, zinc

Model-specific triple tree pins ordered by steering stem hole size; fit compatible lifting stands for front-end maintenance.

€13.53 €17.02

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 16.75 mm pin, Front, Zinc

Pins for use with front stands. Order by steering stem hole size. Model-specific fit for triple tree setups.

€13.53 €17.02

Big Mike Triple Tree Stand Pins — 15.7 mm pin diameter, front mount

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 15.7 mm pin diameter, front...

Model-specific triple tree stand pins ordered to match steering stem hole size for use with front stands.

€13.53 €17.02

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 19 mm (0.75"), front, zinc

Model-specific triple tree pins for use with compatible lifting stands. Order by steering stem hole size.

€13.53 €17.02

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 22 mm (0.87"), Front, Zinc

Model-specific triple tree pins for use with front stands. Order by steering stem hole size.

€13.53 €17.02

-€14.23
Out of Stock

PSR Econo Front Stand — Universal, White, powder-coated

Universal front stand for conventional forks with sturdy mild-steel construction for dependable support.

€55.33 €69.56

-€5.33

PSR Optional Non-Spool Hardware — Black finish

Optional hardware for supporting motorcycles during maintenance; works without spools.

€20.73 €26.06

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS