TOOLS (7)

-€3.41

MOTION PRO Drive T-handle Driver — 26.67 cm (10-1/2"), Nickel Pewter

Accepts any 1/4" or 3/8" drive attachments including sockets, hex drives, crow's foot and swivels.

€9.60 €13.01

-€5.62

MOTION PRO Sprocket Jammer™ — Blue anodized

Prevents rotation of chain and sprockets for easy countershaft nut removal or installation. Can also be used to pull the rear wheel against chain blocks when tightening the rear axle. Precision-machined with laser etching.

€15.86 €21.48

SlackSetter Pro™ Chain Slack Setting Tool — up to 75 mm, Blue anodized

-€5.62

MOTION PRO SlackSetter Pro™ Chain Slack Setting Tool — up to 75 mm, Blue...

Compact tool that quickly measures chain slack and chain-to-swingarm clearance in millimeters.

€15.86 €21.48

Chain Master Link Press Tool — 50-series chains, max master link width 24.8 mm, roller pin up to 5.25 mm, blue anodized

-€9.91

MOTION PRO Chain Master Link Press Tool — 50-series chains, max master...

Compact press tool for clip-style master links on 50 series chains. Presses side plates with roller pins up to 5.25 mm and accepts master links up to 24.8 mm. Hardened steel pins ensure reliable use.

€28.00 €37.91

-€4.38

DAYTONA Magnetic Silicone Tray — DAYTONA, 31021

Foldable silicone tray with an embedded magnet in the base to secure it to metal surfaces.

€12.39 €16.77

-€4.38

DAYTONA Magnetic Silicone Tray — DAYTONA

Foldable silicone tray with an embedded magnet in the base for secure placement on metal surfaces. Compact and portable.

€12.39 €16.77

-€383.31

TECHNORESEARCH Centurion Super Pro Plus — Electrical system, Black

Professional-grade tester with intuitive controls, rugged housing, and modular expandability for fast, repeatable fault isolation.

€1,490.65 €1,873.96

-€172.34

TECHNORESEARCH Complete Oxygen Sensor Installation Kit — O2 sensor, Black, Clear

Fast, all‑in‑one bung kit for O2 sampling and tuning; includes insertion tool, drill bit, sampler blocks, tubing, 25 rivnuts, screws and copper washers.

€669.24 €841.58

-€14.96

TECHNORESEARCH Bung Refill Kit — O2 sensor, Silver/Yellow

Includes 25 each of bungs, plugs and copper washers.

€58.07 €73.03

-€9.01

MOTION PRO Internal Snap-Ring Pliers — Black, Red, Hydraulic

Removes and replaces internal snap rings up to 50 mm deep — for transmission gear locating, bearing retention, oil seals, hydraulic master cylinders and some fork seals.

€25.45 €34.46

-€13.57

MOTION PRO Rotor and Sprocket Holder — 1/2"–9" (13–230 mm), 5 mm & 9 mm pins

Holds sprockets, rotors and flywheels to prevent rotation during removal and installation.

€38.34 €51.91

-€8.27

MOTION PRO Mini Bleeder — 8 mm, Anodized Blue

Compact combined wrench and bleeder tool for fast brake and hydraulic clutch bleeding.

€23.39 €31.66

-€9.46

MOTION PRO Brake Caliper Piston Tool — 14–28 mm center bore, Anodized Blue

Ultra-low-profile tool removes pistons from monoblock brake calipers. Fits 14–28 mm center bores. Non-marring design for aluminum, steel and titanium pistons; single locking screw.

€26.74 €36.20

$T6 Tire Lever — 25.4 cm (10\"), 22 mm, Silver anodized$

-€11.75

MOTION PRO T6 Tire Lever — 25.4 cm (10\"), 22 mm, Silver anodized

Lightweight forged 7075-T6 aluminum lever with a contoured tire spoon and a hex end rated to 90 ft/lb (122.02 Nm).

€33.24 €44.99

-€11.48

MOTION PRO T6 Tire Lever — 25.4 cm (10\"), 24 mm wrench, Silver anodized

Contoured tire spoon with torque-rated hex end for reliable installation and removal; lightweight forged construction for easy handling.

€32.43 €43.91

$T6 Tire Lever — 25.4 cm (10\"), 27 mm, Silver anodized$

-€11.27

MOTION PRO T6 Tire Lever — 25.4 cm (10\"), 27 mm, Silver anodized

Contoured tire spoon and hex end wrench with high-rated hex torque for dependable installation and removal.

€31.85 €43.12

-€11.42

MOTION PRO T6 Tire Lever — 25.4 cm (10"), 32 mm wrench, Silver anodized

Contoured tire spoon with a hex end rated to 90 ft/lb for dependable tire installation. Lightweight forged alloy for easier handling.

€32.27 €43.69

T-6 Combo Lever Adapter — 3/8" drive male, 1/4" drive female, blue anodized

-€8.84

MOTION PRO T-6 Combo Lever Adapter — 3/8" drive male, 1/4" drive female,...

Converts the T-6 Combo Lever™ to a 3/8" driver; 3/8" male to 1/4" female; coin knurling for hand turning; lightening holes; rated to 90 lb/ft.

€24.98 €33.82

-€7.39

MOTION PRO Superlight T-6 Hex Axle Tool — Hex, Silver

Compact axle tool for touring and trailside use; fits many internal-hex sportbike axles; 3/8" square drive rated to 90 lb/ft; weighs 2.5 oz; made in the USA.

€20.89 €28.28

-€2.37

MOTION PRO T-6 Trail Bead Buddy® — Silver anodized

Holds the tire bead down in the rim drop center for easier off-road tire installation and repair. Delrin thumb screw; lightweight and compact.

€6.68 €9.05

-€4.72

MOTION PRO Bead Buddy® II — For Bib Mousse Tubes, Blue anodized

Compact bead holder that hooks over a spoke and pushes the bead into the rim drop center for easier off-road tire and mousse installations.

€13.35 €18.07

$BeadPro™ Tire Bead Breaker and Lever Tool Set — 24.9 cm (9.8\") length, black anodized$

-€24.81

MOTION PRO BeadPro™ Tire Bead Breaker and Lever Tool Set — 24.9 cm...

Ergonomic bead breaker and lever set with integrated tire spoons; lightweight, compact design for motorcycle tool packs.

€70.10 €94.91

-€15.89

MOTION PRO BeadPro™ FS — Bead Breaker, 16"

Shop-grade tire tool that breaks beads on most motorcycles and ATVs. Ergonomic crossguard, integrated tire spoons, extra-long handles. Weighs ~2 lb.

€44.92 €60.81

T6 Combo Lever Adapter — Fits 32 to 27/22 mm axle nuts, Blue anodized

-€6.69

MOTION PRO T6 Combo Lever Adapter — Fits 32 to 27/22 mm axle nuts, Blue...

Converts T-6 Combo Lever™ to a 3/8" driver. 3/8" male and 1/4" female, rated to 90 ft/lb (122.02 Nm). Coin knurled for hand turning; lightening holes reduce weight.

€18.90 €25.59

-€11.64

MOTION PRO T6 Combo Lever — 25.4 cm (10") , 10 mm/12 mm, Silver anodized

Precision tire spoon with a no-pinch lip and a high-torque hex end; ultra-light and easy to carry.

€32.90 €44.54

-€24.05

MOTION PRO T6 Combo Lever Set — 10", 32 mm, 10/12 mm

Two-piece tire lever and wrench set with 32 mm and 10/12 mm hexes, no-pinch tips, and CNC-machined adapter for 27/22 mm axles.

€67.93 €91.98

-€11.53

MOTION PRO Pro Fill™ Air Chuck — Blue anodized, billet aluminum

Pivoting angled head for hard-to-reach valves; head holds adjusted angle; 1/4" NPT female inlet; O-ring seal with thrust washer; precision-machined construction; corrosion-resistant pivot bolt.

€32.58 €44.11

T6 Combo Lever Adapter — Fits 32 to 27/17 mm axle nuts, Blue anodized

-€6.52

MOTION PRO T6 Combo Lever Adapter — Fits 32 to 27/17 mm axle nuts, Blue...

Converts the T-6 Combo Lever™ to a 3/8" driver. Lightweight 7075-T6 aluminum with chrome-vanadium insert; coin knurl for hand-turning.

€18.47 €24.99

-€4.74

MOTION PRO Classic Spoke Wrench — 5 mm, 7 mm, Silver, Nickel, Pewter

Square-end openings hold the spoke nipple on all four sides for a secure fit; offset slotted end allows quick, easy adjustments.

€13.36 €18.10

Rear Wheel Alignment Tool for Harley-Davidson — 25 mm wheel bearing, Silver

-€7.62

MOTION PRO Rear Wheel Alignment Tool for Harley-Davidson — 25 mm wheel...

Fast, accurate rear wheel alignment tool — no tape measure needed. Fits Softail, Sportster®, and Dyna® with 25 mm wheel bearing.

€21.52 €29.14

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company