TOOLS (7)

-€13.98

PROGRESSIVE SUSPENSION Gauge-Mounted Pump — 0–300 psi, for forks and air shocks

Compact gauge-mounted pump for quick suspension and tire repairs. Check valve and let-down valve provide precise control.

€54.39 €68.37

-€9.22

PROGRESSIVE SUSPENSION Standard Shock Spring Tool — PSI shocks, Black

Simplifies removing and installing shock springs; easy to use and fits most twin-shock motorcycle springs.

€35.85 €45.07

-€7.02

PROGRESSIVE SUSPENSION Pre-Load Spanner Tool — single-shock, Blue

Replaces the hammer-and-punch method for quick, accurate pre-load ring adjustments.

€27.31 €34.33

-€2.19

PROGRESSIVE SUSPENSION Pre-Load Spanner Wrench — Silver, Shock

The easy way to adjust shock absorber pre-load for quick, accurate suspension tuning.

€8.51 €10.70

Pre-Load Wrench for Softail — Silver, fits OE and aftermarket Softail shocks

-€2.62

PROGRESSIVE SUSPENSION Pre-Load Wrench for Softail — Silver, fits OE and aftermarket...

Allows greater preload adjustment range without raising the bike. Easier to use than the stock tool. Made in the USA. Compatible with OE and aftermarket Softail shocks.

€10.22 €12.84

-€32.08

JIMS M8 Shifter Shaft Bushing Remover & Installer — 5512, Black, Kit

Toolset for quick removal and precise installation of shifter shaft bushings to the correct depth.

€124.76 €156.84

Crankshaft Bearing Tool — Right, Crankcase, Black

-€65.63
Out of Stock

JIMS Crankshaft Bearing Tool — Right, Crankcase, Black

Removes and installs right crankcase bearings without damaging the case.

€255.20 €320.83

-€21.49

JIMS Evolution Cylinder Stud Assembly Tool — Engine

Captive ball-bearing assembly tool set 1" from top for precise stud installs; fits all Evolution Big Twin and XL models. Made in the U.S.A.

€83.58 €105.07

-€17.00
Out of Stock

JIMS Primary Locking Bar — Front engine sprocket, Black

Immobilizes the primary drive for clutch and primary-drive service. Allows torque-wrench tightening or breaker-bar loosening. Made in the U.S.A.

€66.14 €83.14

-€29.18
Out of Stock

JIMS Cruise Drive Vise Stand — Black, Blue

Aligns transmission gears and shafts for safe, damage-free installation; speeds and simplifies assembly.

€113.50 €142.68

-€12.99

JIMS Shifter Shaft Sleeve Tool — For 5-Speed Transmission, Black

Removes and installs shifter shaft sleeves, assemblies and drums. Made in the USA.

€50.45 €63.44

Main Drive Gear Bearing/Seal Installation Tool — Cruise Drive, 6-speed, Black

-€38.43
Out of Stock

JIMS Main Drive Gear Bearing/Seal Installation Tool — Cruise Drive,...

Precision installer for main drive gear bearings and seal; prevents marring and seats components to correct depth using a one-ton press. Made in USA.

€149.48 €187.91

-€56.85

JIMS Transmission Door Puller — Blue

Removes transmission door with gears and shaft attached. Will not damage door bearings. Made in the USA.

€221.03 €277.88

-€395.75

JIMS Timken® Case Bearing Tool — Engine Case, Steel, Black, PN 959

Precision insert sleeve and complete installation hardware to restore case bearing fitment. Requires hand tools and a two-ton press. Timken bearing not included.

€1,539.00 €1,934.75

Balancer Shaft Removal Tool — Left side, engine case, Black

-€72.29

JIMS Balancer Shaft Removal Tool — Left side, engine case, Black

Removes front and rear counter‑balancer shaft bearing assemblies from the left engine case; fits 96" and 110" Beta® engines. Made in the U.S.A.

€281.14 €353.43

Sealed Wheel Bearing Removal/Installation Kit — 3/4", 1", 25 mm

-€114.88
Out of Stock

JIMS Sealed Wheel Bearing Removal/Installation Kit — 3/4", 1", 25 mm

Removes and installs 3/4" , 1" and 25 mm sealed wheel bearings, with or without ABS. Made in the USA.

€446.75 €561.63

Starter Jackshaft Seal Installer Tool — Jackshaft, Black

-€40.67
Out of Stock

JIMS Starter Jackshaft Seal Installer Tool — Jackshaft, Black

Installs the starter jackshaft seal without distortion; fits the seal in the upper part of the inner primary of Big Twins. Made in the U.S.A.

€158.18 €198.85

Harley Davidson Cruise Drive 6-Speed Main Drive Gear Remover Tool — Black

-€64.36

JIMS Harley Davidson Cruise Drive 6-Speed Main Drive Gear Remover...

Removes the main drive gear from the main bearing while in the transmission case without requiring an arbor press.

€250.28 €314.64

-€62.84

JIMS Inner Primary Bearing and Seal Remover/Installer Tool — Black kit

Safely removes and installs the inner primary bearing and seal without harming bearings. Made in the USA.

€244.42 €307.26

-€18.28

JIMS O² Sensor Tool — Socket, Silver

Removes and installs oxygen sensors on fuel-injected models. Withstands up to 125 ft.-lbs. Made in the USA.

€71.09 €89.37

Transmission Case Shifter Shaft Seal Installer — For 6-Speed Transmission, Blue

-€12.27

JIMS Transmission Case Shifter Shaft Seal Installer — For 6-Speed...

Precision tool that aligns and installs shifter seals to the correct depth.

€47.70 €59.97

Bearing Adapter — Sprocket shaft fit for '06 Harley-Davidson Dyna Glide, '07-'17 Twin Cam

-€28.65
Out of Stock

JIMS Bearing Adapter — Sprocket shaft fit for '06 Harley-Davidson...

Allows installation of a shaft bearing on '06 Harley-Davidson Dyna Glide and '07-'17 Twin Cam; fits sprocket shaft applications and works with compatible bearing tools.

€111.41 €140.06

Transmission Case Shifter Shaft Seal Installer — For 5-Speed Transmission, Blue

-€12.56

JIMS Transmission Case Shifter Shaft Seal Installer — For 5-Speed...

Makes installing shifter shaft seals precise and effortless. Aligns and centers the seal to the correct depth for reliable fitment. Made in the USA.

€48.85 €61.41

-€20.47

JIMS Shifter Shaft Sleeve Tool — 6-speed transmission, Black

Removes and installs shifter shaft sleeves, assemblies and drums; improves alignment and speeds installation. Made in the USA.

€79.61 €100.08

-€41.24
Out of Stock

JIMS Engine Rotator — flywheel assembly, Black

Rotates the flywheel and piston assembly for pushrod adjustments, engine builds, and clearance checks. Not for use with impact wrenches.

€160.35 €201.59

-€81.19
Out of Stock

JIMS 5 & 6-Speed Countershaft Bearing Remover/Installer Tool — Black

Removes and installs closed-end countershaft bearings on 5- and 6-speed transmissions without a press.

€315.80 €396.99

Replacement Sleeve for Timken® Case Bearing Tool — Steel, Silver, Kit

-€60.93

JIMS Replacement Sleeve for Timken® Case Bearing Tool — Steel,...

Several times stronger than stock aluminum case material; restores bearing support. Made in the USA.

€236.94 €297.87

Inner Primary Bearing and Seal Remover/Installer Tool — 967-4, Black

-€25.05
Out of Stock

JIMS Inner Primary Bearing and Seal Remover/Installer Tool — 967-4,...

Removes and installs the inner primary bearing and seal that the transmission mainshaft passes through by pushing on the bearing's outer perimeter to protect new bearings. Made in the USA.

€97.41 €122.46

Inner Primary Bearing and Seal Remover/Installer Tool — 967-5, Black

-€8.91

JIMS Inner Primary Bearing and Seal Remover/Installer Tool — 967-5,...

Removes and installs inner primary bearings and seals by pushing on the bearing's outer perimeter to prevent damage to new bearings. Made in the USA.

€34.64 €43.55

5-Speed Main Case Seal Installer Tool — Blue

-€23.44

JIMS 5-Speed Main Case Seal Installer Tool — Blue

Ensures correct alignment and seal protection during installation.

Made in the USA.

€91.16 €114.60

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company