TOOLS (6)

-€14.87

JIMS Battery Lifter — 5501, Silver

Modeled after larger automotive battery tools but sized for Harley-Davidson® models; easily lifts batteries with extremely tight fits. Made in the USA.

€57.83 €72.70

-€3.42

CUSTOM DYNAMICS Test Light — Black

Compact tester for 12–24 V DC circuits. Checks for shorts, open circuits and measures voltage for fast troubleshooting.

€10.91 €14.33

-€163.88

DAYTONA TWIN TEC LLC Twin Scan 4 Diagnostic Kit — 3.2" L x 2.2" W x 1" H, CAN Bus, ABS

Compact PC-compatible scan tool with ECM programming, ABS support, stand-alone data logging, analog inputs, and speedometer/idle recalibration.

€637.33 €801.21

Reverse Brake Bleeder Tool — Single- and dual-disc, with or without ABS, Black

-€46.39

JIMS Reverse Brake Bleeder Tool — Single- and dual-disc, with or...

Innovative reverse bleeding method removes all air without pumping; pushes fresh fluid through the master cylinder, follows OEM ABS procedures, saves time and fluid, made in the U.S.A.

€180.40 €226.79

-€9.57

JIMS 25 mm Wheel Bearing Adapter — Black, Metric

Precision 25 mm adapter for Harley-Davidson® models from '07 to '19. Made in the USA.

€37.23 €46.80

-€13.22

JIMS Rear Axle Installation Guide Tool — JIMS, Rear Axle, Black

Tool for aligning rear wheel, caliper brackets, hubs and spacers on Big Twin models with hollow 1" (25 mm) standard axles. Made in the USA.

€51.42 €64.64

-€9.25

EPI 40 mm EZ Bearing Greaser — Silver, Billet aluminum

Quickly service Polaris 40 mm ID wheel bearings without removing the shaft. CNC machined grease channel makes packing bearings fast and reliable. Fits 3514635, 3585502, WE301016 and WE305502 and equivalents.

€35.97 €45.22

44 mm EZ Bearing Greaser — fits Polaris 44 mm ID wheel bearings, Silver

-€9.25

EPI 44 mm EZ Bearing Greaser — fits Polaris 44 mm ID wheel...

44 mm bearing greaser for Polaris 44 mm ID wheel bearings — CNC machined, precision grease channel; works with 3514822, 3514699, 3514924, 3514627 and WE301438.

€35.97 €45.22

-€9.25

EPI 30 mm EZ Bearing Greaser — Silver

Tool to pack grease into 30 mm ID wheel bearings. CNC machined with a precision grease channel. Requires wheel, spindle, or shaft removal on some models. Compatible with Arctic Cat, Can Am and Yamaha bearings listed.

€35.97 €45.22

-€9.25

EPI 39 mm EZ Bearing Greaser — fits Can Am 293350109, silver

Quick tool to service 39 mm ID wheel bearings; remove wheel and hub, insert greaser, and use a grease gun to pack bearings. Works with bearing 293350109.

€35.97 €45.22

Primary Locking Bar — Primary Belt Drive, Primary Chain Drive, Black

-€9.57

JIMS Primary Locking Bar — Primary Belt Drive, Primary Chain Drive,...

Immobilizes the primary drive for safe tightening and loosening during maintenance. Prevents rotor and magnet damage.

€37.23 €46.80

Primary Locking Bar — Primary (drive), Black

-€9.57

JIMS Primary Locking Bar — Primary (drive), Black

Immobilizes the primary drive; allows torque-wrench tightening or breaker-bar loosening; prevents rotor and magnet damage; made in the U.S.A.

€37.23 €46.80

-€9.03

EPI Clutch Puller — Polaris, brass

Precision-machined tool for accurate clutch removal; heat-treated for durability. Individually packaged with instructions included.

€35.13 €44.16

-€10.11

EPI Clutch Puller — Ski-Doo, Brass

Precision-machined puller engineered for strength and durability; heat-treated construction and individual packaging with instructions for easy use.

€39.32 €49.43

-€11.62

EPI Clutch Puller — Arctic Cat, Brass

Precision-machined puller engineered for maximum strength and accurate component removal. Individually packaged with instructions included.

€45.17 €56.79

-€9.03

EPI Clutch Puller — Yamaha, Brass

Precision-machined, heavy-duty tool with heat-treated construction. Individually packaged with instructions included.

€35.13 €44.16

-€13.56

EPI Clutch Puller — Polaris, Brass

Precision-machined for accurate removal. Built for exceptional strength. Heat-treated for durability. Individually packaged with instructions.

€52.70 €66.26

-€7.96

EPI Clutch Puller — Polaris, brass

Precision-machined, heat-treated puller packaged with instructions for reliable, long-lasting service.

€30.94 €38.90

Belt Removal Tool — For Polaris models with Team Clutch/Team Secondary Clutch, Gold

-€1.73

EPI Belt Removal Tool — For Polaris models with Team Clutch/Team...

Opens secondary clutches for belt removal on snowmobiles; easier to use than OEM tools; compact for tidy storage.

€6.68 €8.41

Belt Removal Tool — For all Ski-Doo secondary clutches, Gold

-€1.73

EPI Belt Removal Tool — For all Ski-Doo secondary clutches, Gold

Opens secondary clutches for belt removal on snowmobiles. Easier to use than OEM tools. Stores neatly.

€6.68 €8.41

-€13.98

EPI Jam Nut Driver — Silver

Designed to remove and install the primary clutch jam nut. 3/4" square drive for secure fit.

€54.38 €68.36

Spider Tool — 3/4" drive, fits P-85 and P-90 primary clutches, gray

-€13.98

EPI Spider Tool — 3/4" drive, fits P-85 and P-90 primary clutches,...

Removes the primary clutch spider on Polaris P-85 and P-90 clutches; 3/4" drive; also fits select Arctic Cat and Comet models.

€54.38 €68.36

Lighting Product Test Case — Compact kit, Black

-€39.02

CUSTOM DYNAMICS Lighting Product Test Case — Compact kit, Black

Complete test kit for troubleshooting and warranty verification of LED lighting products; plug-and-play connectors and included power adapter.

€151.77 €190.79

-€32.08

JIMS M8 Shifter Shaft Bushing Remover & Installer — 5512, Black, Kit

Toolset for quick removal and precise installation of shifter shaft bushings to the correct depth.

€124.76 €156.84

Crankshaft Bearing Tool — Right, Crankcase, Black

-€65.63
Out of Stock

JIMS Crankshaft Bearing Tool — Right, Crankcase, Black

Removes and installs right crankcase bearings without damaging the case.

€255.20 €320.83

-€21.49

JIMS Evolution Cylinder Stud Assembly Tool — Engine

Captive ball-bearing assembly tool set 1" from top for precise stud installs; fits all Evolution Big Twin and XL models. Made in the U.S.A.

€83.58 €105.07

-€17.00
Out of Stock

JIMS Primary Locking Bar — Front engine sprocket, Black

Immobilizes the primary drive for clutch and primary-drive service. Allows torque-wrench tightening or breaker-bar loosening. Made in the U.S.A.

€66.14 €83.14

-€29.18
Out of Stock

JIMS Cruise Drive Vise Stand — Black, Blue

Aligns transmission gears and shafts for safe, damage-free installation; speeds and simplifies assembly.

€113.50 €142.68

-€12.99

JIMS Shifter Shaft Sleeve Tool — For 5-Speed Transmission, Black

Removes and installs shifter shaft sleeves, assemblies and drums. Made in the USA.

€50.45 €63.44

Main Drive Gear Bearing/Seal Installation Tool — Cruise Drive, 6-speed, Black

-€38.43
Out of Stock

JIMS Main Drive Gear Bearing/Seal Installation Tool — Cruise Drive,...

Precision installer for main drive gear bearings and seal; prevents marring and seats components to correct depth using a one-ton press. Made in USA.

€149.48 €187.91

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS